K-WANG
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
ALSTOM GDS1168-6112 power unit
ALSTOM GDS1168-6112 power unit
INTRODUCTION
The PIBe+ (Power Interface Board EtherCAT) forms part of a PECe drive controller.
The PECe drive controller consists of a standard “off the shelf” x86 processor (often referred to as the ‘CPU’), running Converteam HPCi software, an EtherCAT connection to standard ECAT I/O, if required, and one or more PIBe+’s.
EtherCAT is a communication protocol based upon 100 base T, where the EtherCAT uses standard Ethernet hardware. It allows the setting up of firing pulses at the PIBe+ to a resolution of up to 33ns (depending on configuration). It also allows analogue, digital and encoder signals to be communicated to and from the drive controller with the same timing resolution.
This document describes the core part of the PIBe+, which may be enhanced with factory fitted options of PIBe+ pulse amplifier or PIBe+ Fibre I/O as stated in section 14. A single PIBe+ can control up to 32 devices fibre connected, or 24 devices copper connected.
The PIBe+ core board referred to in this document is an enhanced version of the PIBe2 and PIBe3. The salient enhancements are a larger FPGA, 16 analogue inputs instead of 8 and a Texas Instruments TMS320C6748 DSP
LV7000-6-10306 G0T02SNA1A200D2C3
GE Fanuc Embedded Systems’ VMIVME-7807/VME-7807RC are full featured
Pentium® M-based, single board computers (SBCs) in a single-slot, passively cooled,
VME Eurocard form factor. These products utilize the advanced technology of Intel®’s
855GME chipset.
The VMIVME-7807/VME-7807RC provide features typically found on desktop
systems such as:
• 1.0GB DDR SDRAM using one SODIMM and an optional 512MB of solder-in
memory for a maximum of 1.5GB
• Built-in SVGA support (front panel connection)
• Digital video controller (rear I/O) DVI-D with dual head display capabilities
• 10/100 Mbit Ethernet controller (front panel connection)
• Dual Gigabit Ethernet supporting (front panel or rear I/O)
• Optional P0 with VITA 31.1 interface
• Serial ATA (SATA) support (rear I/O)
• Serial port COM1 (front panel connection)
• Ultra IDE drive support (rear I/O)
• Real-Time clock/calendar
• Front panel reset switch
• Miniature speaker
• Keyboard/Mouse port (front panel connection)
The 855GME chipset allows the VMIVME-7807/VME-7807RC to provide enhanced
features such as integrated video and Ultra ATA/100 IDE support. The
VMIVME-7807/VME-7807RC are capable of executing many of today’s desktop
operating systems such as Microsoft®’s Windows® XP, Windows 2000 and a wide
variety of Linux® based operating systems. The standard desktop features of the
VMIVME-7807/VME-7807RC are described in Chapter 2 of this manual.
VMIVME-7807/VME-7807RC Product Manual
14
The VMIVME-7807/VME-7807RC provide features useful to embedded applications
such as:
• Three serial ports: COM2, COM3 and COM4 (rear I/O)
• Four USB 2.0 ports (two on front panel and two rear I/O)
• 32KB of nonvolatile RAM
• Remote Ethernet booting
• Up to 2GB of CompactFlash on secondary IDE (optional)
• Software-selectable Watchdog Timer with reset
Additionally, the VMIVME-7807/VME-7807RC offer one PMC expansion site (PCI-X,
66MHz) with front panel access. The VMIVME-7807/VME-7807RC are capable of
executing many of today’s operating systems such as VxWorks®, Solaris™ or QNX®.
The embedded features of the VMIVME-7807/VME-7807RC are described in
Chapter 3 of this manual.
The VMIVME-7807/VME-7807RC are suitable for use in applications ranging from
telecommunications, simulation, instrumentation, industrial control, process control
and monitoring, factory automation, automated test systems, data acquisition
systems and anywhere that the highest performance processing power in a single
VME slot is desired.
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
AB MicroLogix 1400 Programmable Controllers -
AB1642 Module Manual MicroLogix 1500 & CompactLogix Resolver Interface Module -
AB 1769-L24ER-QB1B CompactLogix 5370 L2 Controllers -
AB 1769 Compact I/O Modules Specifications -
AB 1769 Controller CompactLogix System -
AB 1763-L16AWA MicroLogix 1100 Programmable Controller -
AB 1763-L16AWA MicroLogix 1100 Programmable Controllers -
AB 1762-L24AWA MicroLogix 1200 Programmable Controllers -
AB 1762-IQ8OW6 DC-Input/Relay-Output Combination Module -
AB 1757-SRM ProcessLogix and ControlLogix System Redundancy Module -
GE ALSTOM：SPU.232.2.029.366.817 -
AB ProcessLogix R500.1 Process Control System -
AB 1761 - NET - Ethernet Interface for ENI MicroLogix -
AB 1761-L20BWB-5A MicroLogix 1000 Series
-
AB 1761 MicroLogix 1000 Programmable Controller -
AB 1756-DHRIO, 1756-DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module -
AB 1756-D IO ControlLogix I/O Modules Specifications -
AB 1756-cpu ControlLogix Systems -
AB 1756 ControlLogix Analog I/O Modules -
AB 1756 ControlLogix System -
AB 1756 IB32 ControlLogix 32-point DC (10…31.2V) Input Module Series B -
AB 1756-IR6I ControlLogix Analog I/O Modules -
AB 1756-DNB ControlLogix DeviceNet Scanner Module -
AB 1756-CN2RXT ControlLogix-XT ControlNet Interface Module -
AB 1756-CN2 1756-CN2R ControlLogix ControlNet Interface Module -
AB 1747 - AENTR SLC 500 EtherNet/IP Adapter -
AB 1746, 1747SLC500 Control System Selection Guide
-
AB 1746-C7, 1746-C9, 1746-C16 SLC 500™ Programmable Controller Rack Interconnect Cables -
AB 1746-BTM Drum Temperature Control Module -
AB 1746-BAS and 1746-BAS-T SLC 500 BASIC and BASIC-T Modules -
AB 1746-A4, -A7, -A10 SLC 500™ Modular Chassis -
AB SLC 500™ Modular Chassis 1746-A4, -A7, -A10 and -A13 Series B -
AB 1734-AENT POINT I/O EtherNet/IP Adapter -
AB Allen-Bradley's 1734 POINT I/O Series Products -
A-B 1715 Redundant I/O System Specifications
-
AB 56AMXN/B ControlLogix AutoMax DCSNet and AutoMax Remote I/O Communication Interface Module -
AB Bulletin 1203 Serial Communications Module -
AB 1326AB High Performance AC Servomotors -
AB 1326AB 460V, Torque Plus Series, AC Servo Motors -
AB 1336 PLUS II Engineering Drives -
AB CENTERLINE® 2100/2400 Series Motor Control Centres -
AB 1394 Digital AC Multi-Axis Motion Control System -
AB 1398 ULTRA 100 Series Drives -
AB 1402 Series Line Synchronisation Modules -
AB 1407-CGCM Combined Generator Control Module
-
ABB 3BUS094398 IndustrialIT System 800xA Harmony/INFI90 System -
ABB 3BUS092084R0001 IndustrialIT System 800xA Symphony Harmony -
ABB AC 800M 3BSE036352 Controller Hardware Product Guide System Version 5.1 -
ABB Ability™ Symphony® Plus HR Series Control and I/O -
ABB S+ Engineering: Harmony Gateway Software 6.0 -
ABB 3BSE062980 en H Compact Product Suite -
AC 800M PROFIBUS DP Configuration 3BDS009030-510 -
ABB AC 800M PROFIBUS DP System -
AC 800F Freelance 200 control system -
ABB Freelance 800F AC 800F Control System -
ABB 800xA for Harmony Systems -
ABB Triguard SC300E MSR04XI -
ABB Triguard SC300E Triple Module Redundancy -
ABB REB500 REB500sys Digital Substation Protection System -
ABB Distributed busbar protection REB500 -
GE Multilin MM2 Low Voltage Motor Protection System -
GE A-S1300B Mark* VIe Control -
GE A35311 Vernova Mark VIe Control System -
GE Energy Mark VIe Control Product Description -
GE Hydran* M2 Transformer Gas Monitoring System Installation Guide -
GE MVME51005E Single Board Computer -
GE MVME6100 Single-Board Computer -
GE MVME5500 Single-Board Computer -
Bristol Babcock Control Wave Micro 396563-07-4 CPU33 240mA @ 3.3VDC -
GE 151X1235BC01SA01 -
GE 369 Motor Management Relay Instruction Manua -
GE Grid Solutions 350 Feeder Protection System -
GE 269Plus Motor Management Relay -
GE 239 MOTOR PROTECTION RELAY -
ABB 1TGE106170M4200 -
ABB Procontic T300 Programmable Logic Controller in 35 ZE94 models -
Control Wave Micro 396603-01-7 Isolated Analog Output Module -
ABB Procontic T20G Programmable Controller -
ABB Advant Controllers 400 Series with MOD 300 Software -
ABB Advant Controller 450 The proven process controlle -
ABB Advant Controller 450 User’s Guide -
ABB Panel 800 - PP865 version 5.1 -
ABB Panel 800 - PP836 Hardware and Installation -
ABB Automatic Transfer Switches -
ABB Drive contactors Type DA & EHDB -
ABB EasyLine EL3000 Series Continuous gas analyzers -
ABB EL3020 EL3040 Continuous Gas Analyzers -
ABB Advance OptimaAO2000 Series -
ABB DCS 600 MultiDrive Thyristor Power Converters Series -
ABB BSD Brushless Servodrives -
ABB Baldor FlexDrive Servo Drives -
ABB AC servo motors BSM Series -
ABB New BSD Series A complete range -
ABB Advant Controller 110 -
ABB ASTAT Manual AST10_054 Crane motion controller -
ABB ASTAT A4 EN Manual Crane motion controller. -
ABB Advant Controller 210 -
ABB Advant Fieldbus 100 User Manual -
ABB Advant Controller 160 -
ABB Advant Controller 70 -
ABB Advant Controller 31 90 Series Intelligent Decentralized Automation System 90 Series -
ABB ACV 700 Series Inverter -
ABB ACV 700 Frequency Converters -
ABB ACS850-04 drive modules -
ABB RDCU Drive Control Units -
ABB ACS800 Converter -
ABB AC500 Product Series -
ABB Get more done better with Advant Controller 400 series -
FOXBORO FDC280 RH101FQ DCS Modules -
ABB LDGRB-01 Highly functional controller module
-
Electric tricycle truck, agricultural tricycle, elderly vehicle, warehouse truck -
GE 8042-CC-85 Carrier extension cable, 0.85m -
GE 8086-FC-20 20 + 24 pin cables for 8619 (2m) -
GE 8041-CC-35 Carrier extension cable, 0.35m -
GE 8085-FC-10 20 + 24 pin cables for 8619 (1m) -
GE 8034-CC-12 Intrinsically Safe Carrier Extension
-
GE 8082-FC-30 16-pin cable for 8618 (3m) -
GE 8030-CE-RH Intrinsically Safe Carrier extender, right hand -
GE 8080-FC-10 16-pin cable for 8618 (1m) -
GE 8021-CE-LH Carrier extender, left hand -
GE 8044-CC-20 Carrier extension cable, 2.0m -
GE 8725-CA-RB Railbus isolator carrier with PFM -
GE 8712-CA-NS Node services carrier, Profibus-DP LAN -
GE 8724-CA-PS Intrinsically Safe module power supply carrier
-
GE 8711-CA-NS Node services carrier, screw terminal LAN -
GE 8723-CA-RB Railbus isolator carrier -
GE 8606-FT-RT Field terminal, RTD -
GE 8620-FT-MT Field terminal assembly
