Schneider 140DDI84100 Discrete Input Module

Schneider 140DDI84100 Discrete Input Module

Core product positioning and basic parameters

This module belongs to the DC discrete input module of Modicon Quantum automation platform, with the following core basic parameters:

Discrete input quantity: 16

Channel grouping: 8 channels per group

Input logic type: Positive (sink)

Address requirement: occupies 1 input word

Module Form: Standard Format

Product weight: 0.3kg

Certification mark: Compliant with CE certification

Electrical performance indicators

1. Input voltage and current

Input voltage range: 10-60V DC, with different current requirements for different voltages:

12V DC：5-10mA

24V DC：6-30mA

48V DC：2-15mA

60V DC：1-5mA

Voltage state threshold (guaranteed value):

State 1 (high level): 9-12V at 12V ± 5%, 11-24V at 24V ± 20%, 34-48V at 48V ± 20%, 45-60V at 60V ± 20%

State 0 (low level): 0-1.8V at 12V ± 5%, 0-5V at 24V ± 20%, 0-10V at 48V ± 20%, 0-9V at 60V ± 20%

Absolute maximum voltage: 75V DC

2. Response and switch performance

Response time: both state 0 → 1 and state 1 → 0 are 4ms

Switching frequency: ≤ 100Hz

3. Isolation and power consumption

Isolation performance: 2500Vrms DC (continuous for 1 minute) is isolated between channel groups and buses, and 700Vrms DC (continuous for 1 minute) is isolated between channel groups

Power consumption: 1W+(0.62 x activated points)

Bus current requirement: 200mA

Signal indication and anti-interference capability

1. Local signal indication (LED)

Green LED (Active): indicates normal bus communication

Red LED (F): Indicates detection of external fault

16 green LEDs: corresponding to the status of 16 input points (displaying whether the input is valid)

2. Anti interference standards

Electrostatic discharge resistance: Contact discharge 4kV, air discharge 8kV (compliant with IEC 801-2 standard)

Electromagnetic field resistance: 10V/m (frequency 80-2000MHz, in accordance with IEC 801-3 standard)

Environmental and Certification Requirements

1. Environmental adaptation range

Working environment temperature: 0-60 ° C

Storage environment temperature: -40-85 ° C

Relative humidity: 95% (without condensation)

Working altitude: ≤ 5000m

2. Product certification standards

Following standards: CSA C22.2 No 142, UL 508

Product certification: C-Tick certification, FM Class 1 Division 2 certification

Sustainability and environmental attributes

Sustainable Supply Status: Belongs to "Green Premium Products" (Schneider Green Preferred Products)

RoHS Compliance: Compliant with RoHS standards since January 2009, with Schneider Electric Declaration of Conformity

Product environment file: obtainable

Scrap disposal: No special recycling operation is required, simplifying the subsequent environmental treatment process