+086-15305925923

K-WANG

Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
新闻动态
newS
   
Brand

Xycom 3515 KPM PM101906 Operator Interface

From: | Author:Wang | Time :2025-05-29 | 93 visit: | Share:
Xycom 3515 KPM PM101906 Operator Interface
Product Overview
The 3500 series of flat panel industrial PCs with 6-slot ISA/PCI expansion include the 3515, 3515KPM, and 3512KPM models.
These industrial PCs offer a powerful, compact package for the factory floor and other harsh environments.
The 3515 is an industrial PC with a display only (touchscreen optional).
The 3512KPM and 3515KPM is an industrial PC with a display, integrated keypads, and an integrated mouse.
They feature an open architecture to meet a wide variety of applications that require both a powerful PC and a durable industrial front panel.
The PCs integrate a computer card cage, mass storage, display, and power supply in a truly industrial form.
Their modular design allows easy access to expansion boards, jumpers, power supply, flat panel dis
play, and disk drives.
The front panel of every model is sealed to NEMA 4/4X/12, and the flat panel display is protected by an impact-resistant shield


Standard Features

With AHIP6+ board
Pentium® II technology
PCI 64 bit video controller, 2 MB video RAM
PCI local-bus IDE controller
Two 168-pin SDRAM DIMMs that support 32, 64, 128, and 256 MB options
Two USB ports
100MHz front side bus with Pentium II processors
With AHIP370+ board
Celeron ® technology
AGP 64 bit video controller, 2 MB video RAM
PCI local-bus IDE controller
Two 168-pin SDRAM DIMMs that support 32, 64, 128, and 256 MB options
Two USB ports
On all units
Two serial COM ports
RS-232
RS-232 or RS-485
Flat panel display
15-inch flat panel, 1024x768 resolution (3515 and 3515KPM)
12.1-inch flat panel, 800x600 resolution (3512KPM)


Parallel port

VGA port
Flash BIOS
9-inch mounting depth
3.5-inch internal, side access floppy drive
Six AT-bus full-length expansion slots
Four ISA slots
One ISA or PCI slot
One PCI (4.8” maximum length with AHIP6+ board)
IR Port (IrDA and ASKIR compatible)
Rear PS/2 keyboard port and AUX port (also a front PS/2 keyboard port on 3512KPM and 3515KPM)
Status LEDs
Power
Disk
Com
Input
3.5-inch internal IDE  hard drive
MS-DOS®
Front panel sealed to meet NEMA 4/4X/12 specifications when panel mounted in a
suitable fire and electrical enclosure.
Approved for use in Class I, Division 2 hazardous locations
Autosensing AC power supply
Side power connector with retainer bracket


Optional Features

Touchscreen resistive technology with less than 1.5% linearity error
Higher capacity IDE hard drives and solid state drives
3512KPM
40 relegendable function keys (80 with the F/A function)
Numeric, PC control, and alpha keypads
Integrated mouse
3515KPM
40 relegendable function keys (80 with the F/A function)
Numeric, PC control, and alpha keypads
Windows start menu and pop-up menu keys
Integrated mouse
Flat-panel display
15.0-inch TFT flat panel (3515 and 3515KPM)
12.1-inch TFT flat panel (3512KPM)
CD-ROM (internal)
Pre-installed PCI 10/100 Base-T Ethernet card
External floppy drive 9000-EXF
Front mount floppy kit 9000-FFK
Front access panel for floppy port and keyboard port 9000-FKA
Preloaded Microsoft Windows 95 or Windows NT® operating system


Product Overview

Xycom 3515 KPM PM101906 is an operator interface designed specifically for industrial environments, aimed at providing efficient and convenient human-machine interaction solutions for various automation systems. This interface has been widely used in the field of industrial automation due to its reliable performance, rich functionality, and good compatibility.


Specification parameters

Display specifications: Equipped with a 15 inch display screen, it can clearly present various information and meet the data visualization needs of industrial sites. Whether it is monitoring complex process flows or displaying equipment operating parameters, it can provide intuitive and accurate visual feedback for operators.

Electrical parameters: The working voltage supports 115V AC or 230V AC, with a frequency of 50/60Hz, suitable for power supply standards in different regions. The rated current is 6.3A, ensuring stable operation under normal working load and providing power guarantee for the continuous and reliable operation of the equipment.

Physical specifications: The overall design is compact, with optimized dimensions and weight, making it easy to install on various industrial control cabinets or workstations. Its sturdy shell material has certain protective properties, which can resist interference such as dust and vibration in industrial environments, ensuring the normal operation of the equipment under harsh conditions.


Core functions

Convenient operation: With a concise and clear interface, operators can get started without complex training. Through an intuitive graphical interface and convenient operation buttons, it is possible to quickly start, stop, and adjust parameters of the automation system, thereby improving work efficiency.

Data Interaction: Supports data communication with various industrial equipment and control systems, enabling real-time acquisition of equipment operating status, process parameters, and other information, and accurately transmitting operator instructions to the corresponding equipment. This efficient data exchange capability makes the entire automated production process more coordinated and smooth.

Status monitoring: Real time monitoring of the operating status of various devices in the automation system, visually displaying the normal, fault, alarm, and other status of the devices through different colors, icons, and other methods. Once the equipment encounters an abnormality, it can promptly issue an alarm to remind operators to handle it, effectively reducing equipment downtime and ensuring production continuity.


Working principle

Xycom 3515 KPM PM101906 establishes a connection with external automation systems through internal communication modules. When the system is running, the interface continuously receives real-time data from the device and parses it to display it in an intuitive form on the screen. At the same time, the operator's operation instructions on the interface will be quickly captured and encoded before being transmitted to the corresponding equipment or control system, thereby achieving effective control over the entire automation process.


Precautions

Installation environment: It should be installed in a dry and well ventilated environment, avoiding direct sunlight and high temperature and humidity. Stay away from strong electromagnetic interference sources to prevent any impact on the normal operation of the interface.

Power connection: Ensure that the power connection is correct and stable, and avoid damage to the equipment caused by power fluctuations or abnormal voltage. Before connecting the power supply, it is necessary to carefully check whether the power parameters match the equipment requirements.

Daily maintenance: Regularly clean the display screen to keep it clear, so that operators can accurately read information. Regularly check the connection lines of the equipment to ensure that they are firmly connected and free from looseness, damage, and other issues.

REFURBISHED XYCOM 3612KPM PROFACE OPERATOR INTERFACE 1000-256-CDF-2K ...


  • Pro-face / Xycom 4612T / 4612-102031015 - Flat Panel Industrial PC
  • Xycom XVME-203 / 70203-001 - VME Board
  • Xycom XVME-957 / 70957-001 - Mass Storage Sub-System
  • Xycom 9403t - Power Board
  • Xycom 3515-KPM - Operator Interface
  • Xycom XVME-560 / 70560-001 - AIN Analog Input Module
  • Xycom / Adept XVME-201 / 70201-001 - VME Digital Counter I/O Module Board Card
  • Xycom 9460 - Touch Screen
  • Xycom Automation 9000-FFP-HU - Module
  • Xycom XVME-201 - Digital I/O Controller Card
  • Xycom / Pro-face 5015T/R2 - Panel
  • Xycom 103711-001 / 103709 - Circuit Board Card
  • Xycom / Pro-face 5015KPMT - Operator Panel
  • Xycom SXT1811T / 1811-C00000000 - Touch Panel
  • Xycom / Analogic CDA XVME - VME TI DSP SCSI I/O Module Serial RS232 Card Board
  • Xycom 4153/C - Control Interface
  • Xycom / Pro-face 1547 / 1547-00113101 - Industrial Computer
  • Adept 10350-01064 - AWCII 060 Computer/CPU Module Card for MV Controller
  • Xycom / SPX Air Gage 3515 KPM / PM101874B - Operator Interface Panel
  • Xycom / Pro-face 5015T/R2 - Flat Panel Touch Monitor (Not Working)
  • Xycom 3515 - Operator Interface
  • Xycom 9406AC - Industrial Computer
  • Xycom 8100-0272A / 278811XFF - CNC Brown Out Sensor/PROM Card
  • Xycom 3115T / 1200-256-2K-N1 - Operator Touch Panel (For Parts)
  • Xycom 83060CA - Processor Module Board
  • Xycom XVME-540 - VMEbus AIO Module
  • Xycom XVME-955 - Floppy Disc Hard Drive Module
  • Xycom 2005 - 9-inch LCD Upgrade Kit for CRT with Cable Kit
  • Xycom 9000-EXF - Industrial Component
  • Xycom 4860A / 91886-001 - 12" Operator Interface Panel Terminal
  • Quarndon Systems / Xycom XVME-220 - 32pt Programmable Scanner
  • Xycom 98405A-001 - Main Board
  • Xycom / ViewTronix VT1040T - Touch Screen
  • Xycom XVME-566 / 74566-002 - Fast Analog Input VMEbus Module
  • Xycom 9987 / 9987-71338-010 - HMI & Open Interface Panels Display
  • Xycom 4100-AT2 - Single Board Computer PC/ATbus Product Manual
  • Xycom 8450 - LCD monitor with cables for 14inch display
  • Generic MP9W - LCD replacement for 12 inch Monochrome CRT with cables
  • Xycom / Pro-face 5017T - 17" Industrial Touch Monitor (For Parts/Repair)
  • Xycom XVME-675 / XVME-956 - Computer Module (Intel 100Mhz, SCSI, Networking, VGA)
  • Xycom 3100M / 3100-000000000 - Operator Interface
  • Xycom / Pro-face ST401-AG41-24V - Graphic Touchscreen Operator Interface
  • Xycom Automation 1300-000100000 - Node Module
  • Xycom 3615KPM - Operator Interface
  • Xycom 5019 / 5019-A00000000 - Operator Interface Screen Monitor (Not Working)
  • Xycom XVME-688 / 70688-011 / 71688C-001 - VMEbus CPU
  • Xycom XVME-977 / 70977-011 - VME Bus Card with Floppy Drive
  • Xycom 10330-00800 - Digital I/O Board
  • Xycom 9486 - Operator Interface Panel
  • Xycom 9462 - 12.1-inch Operator Interface Panel
  • Xycom XVME-428/1 - VME Bus Intelligent Asynchronous Serial Communication Module
  • Xycom XVME-957 / 70957-001 - VMEbus Mass Storage Sub-System
  • Xycom XVME-660 / 70960-001 - Processor Module Top Board
  • Xycom Automation / Pro-face XT1502T - Operator Interface
  • Xycom / SVG Thermco XVME-203/293 / 70203-001 / 602939-01 - VMEbus Module with Quadrature
  • Xycom 3015T - Operator Interface Panel
  • Xycom XVME-202 - Controller Module Board
  • Xycom XVME-545 - VMEbus Module
  • Xycom 1300-Client-AC - ACP Node
  • Xycom 2000T / 97957-101 - Operator Interface
  • Xycom XVME-682 / 716828-100 / 92373-001 - VMEbus Processor PCB Board
  • Xycom 9450 - PC/AT Computer Operator Interface HMI Screen Monitor Keypad Control
  • Xycom Automation 9987 / 9987-3338-2 - Operator Interface Computer Board
  • Xycom 2060 - 12-inch LCD upgrade monitor with Cable Kit
  • Pro-face / Xycom PFXGP4501TAA - 10.4 inch TFT Color LCD
  • Xycom XVME-401 / 70401-001 - VMEbus Module
  • Xycom / Pro-face 5019T-SER - Operator Interface Screen Monitor
  • Xycom 81625DA - Control Board
  • Xycom 9465 / 01631B001601J - Operator Interface Industrial Computer Terminal
  • Adept / Xycom 10332-00800 - I/O PC Board VME Digital DIO Module
  • Xycom 4810A - 9-inch LCD monitor upgrade with Cable Kit
  • Xycom XVME-540 / 86-16098-001 - AIO VMEbus Module
  • Xycom XVME-212 / 70212-001 - 32 Channel Programmable Scanner VMEbus DIN Module
  • Xycom 510084 - Power Supply Board
  • Xycom XVME-240 / 70240-001 / 2800302 - DIO VMEbus Module Card
  • Xycom 9450-248661601 - HMI Panel
  • Xycom 9450 / 9450-27B131901 / 713332 - HMI Panel Display
  • Xycom 9450 / 4664 - Automation Interface Screen Monitor
  • Xycom XVME-220 - VMEbus 32pt Programmable Scanner DOUT
  • Xycom XVME-979 - CD-ROM/HDD/FDD Interface Card/Module for MV Controller
  • Xycom XVME-505/1 / 70505-001 - VME Analog I/O Module
  • Xycom 4615T - HMI
  • Xycom XVME-675 / 957 / 956 - VME Bus Card Floppy Drive CPU Assembly
  • Xycom 9485 / 9485-27A131701 - Operator Interface Panel
  • Xycom XVME-566 - Analog Input Module
  • Xycom 99142-025 - Circuit Board
  • Xycom 4615kPM - HMI / Operator Panel
  • Xycom Automation QPI-MBP-XA1 - Modbus Plus Communication Module
  • Xycom XVME-085 - Proto VMEbus Prototyping NIKL VME Module
  • Xycom Pro-face 1547 / 1547-00113101 - Industrial Computer
  • Xycom 81987-001-D / 1805 - General Purpose I/O Circuit Board
  • Xycom XVME-505/1 - VMEbus Analog I/O Module
  • Xycom Pro-face GLC150-BG41-DNM-24V - Graphic Logic Controller
  • Xycom Pro-face 3310T / 3310-001101001 - Operator Panel
  • Xycom 99157-001 - Circuit Board
  • Xycom Pro-face 5017T - 17" Industrial Touch Monitor
  • Xycom XVME-202 - VMEbus Module
  • Xycom XVME-103 / 10103-001 / 70401-001 - VMEbus CPU Module
  • Xycom XVME-240 - DIO VMEbus I/O PCB
  • Xycom XVME-977 - VME Bus Card with Floppy Drive
  • Xycom 4860VME - Keypad Operator Interface Panel Terminal Monitor
  • Xycom 8000 KB3 / 97788-001 - Keyboard
  • Xycom 71602C-100 - VME Board
  • Xycom XT1502-BB-RB / PM-102000 - Display Panel
  • Xycom Pro-face 5019T / 5019-A10010000 - Industrial HMI Display
  • Xycom / MESA Electronics 70956-411C / 4I29X - 16 Bit Ethernet PLC Card
  • Xycom 99222-001 - Industrial PC Board
  • Xycom XVME-955 - Storage Module for MV Controller (No HDD)
  • Xycom XVME-110 / 70110-001 - VMEbus Module
  • Xycom Automation 5019T / 5019-A10010000 / 144602-RS - HMI Display
  • Xycom 2000-KB1 / 94687-001 - Keyboard / Keypad
  • Xycom XVME-401 / 70401-001 - VMEbus Module
  • Xycom XVME / CU040103500 / 4200401 - VMEbus Rack Component
  • Xycom XVME-404 / 70404-001 - VME Disc Drive Controller Module
  • Xycom 3410-KP - 10.4" Operator Interface Flat Panel Industrial PC (For Parts)
  • Xycom / Micro Vitec 9457 / 9457-023812001 / 9457-713332 - Operator Interface Panel
  • Xycom XVME-675 / XVME-956 / PM101558 - CPU Module with DISK Module
  • LAM Research / Xycom 810-17033-003 / 70110-003 - 512K SRAM PCB Card
  • Xycom XVME-100 / 70100-001 - ROM PCB Board
  • Xycom Pro-face 5015T - Touch Monitor
  • Xycom Automation 1300-000100000 - Operator Interface
  • Xycom XVME-675 / XVME-956 / 70675-098 - CPU Module with DISK Module
  • Xycom 3015 / 139001-001 - Operator Interface Panel
  • Xycom Automation 143913-001 / 13ZT103-00-010 - TSKAM Board
  • Xycom XVME-956 - Disk Module
  • Xycom 3308-KP - Industrial Workstation
  • Xycom PMXVME-230 / PM-101659 - VMEbus Intelligent Counter Module
  • Xycom 4870 - Operator Interface Panel