K-WANG

+086-15305925923
Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
Home >> ABB >> ABB 5SGX1060H0003 SCR module
新闻动态
newS
   
Brand

ABB 5SGX1060H0003 SCR module

From: | Author:Wang | Time :2024-11-22 | 211 visit: | 🔊 Click to read aloud ❚❚ ▶ | Share:

ABB 5SGX1060H0003 SCR module

Installation
Chaining a control panel
This figure shows how to chain a control panel to several drives:
Chaining a PC via a control panel
This figure shows how to chain a PC via a control
panel to several drives.
Note: When a control panel is used for a PC
connection, it cannot be used to operate the drives.
1. Inset the four stand offs into the intermediate cover.
2. Connect the patch cable between X13 on the
SDCS-CON-H01 and X13 on the SDCS-DPI-H01 adapter.
3. Plug the SDCS-DPI-H01 adapter onto the standoffs.
4. Connect the grounding cable at X1 and the grounding
standoff using the screw.
5. Connect the cables to the control panel / a drive using
X10:2 and X10:1.
Setting up the firmware
1. Power up the drive.
2. Set the node ID, see 49.01 Node ID number. All drives connected to the panel bus must have a unique node
ID. It is advisable to reserve node ID 1 for spare / replacement drives, because they have node ID 1 as default
setting.
3. Set the baud rate, see 49.03 Baud rate. The baud rate has to be the same for all nodes on the panel bus.
4. Select a suitable communication loss action, see 49.04 Communication loss time and 49.05 Communication
loss action.
5. Save the settings with 49.06 Refresh settings = Refresh.
Note: Refreshing may cause a communication break, thus reconnecting the drives may be required.


Power Interface board SDCS-PIN-H01 (H1 ... H5)
The SDCS-PIN-H01 is designed for DCS880 converter modules sizes H1 ... H5 (20 A ... 1190 A).
It has 4 different functions:
1. The power supply for all internal voltages of the whole drive and the connected options (H1 ... H5).
2. Control of armature bridge including high ohmic measurement of DC- and AC voltage and an interface for
the current transformer measuring the armature current (H1 ... H5).
3. Control of the OnBoard field exciter and field current measurement (H1 ... H4).
4. An automatic adaptation of the auxiliary voltage of either 230 VAC or 115 VAC (H1 ... H5).
The board is connected to ground at points ( ) inside the module.
The board is used for mains supply voltages from 100 V up to 500 V (IEC) / 525 V (UL) and 600 V.
The DCS880 provides an automatic adjustment for current and voltage measurement, burden resistor settings
and 2-Q or 4-Q operation by means of setting parameters in the firmware.
Layout SDCS-PIN-H01
  • Beckhoff CX5020-0112 - PLC Module
  • Beckhoff CP2912-0000 - Control Panel
  • Beckhoff C6920-1047-0030 - industrial control cabinet control PC
  • BECKHOFF CX1020-0121 - CPU Module Power Supply Setup
  • Beckhoff EL6752 - DeviceNet Master EtherCAT Terminal
  • Beckhoff IP1002-B518 - Fieldbus Box Module
  • Beckhoff CP6606-0001-0020 - 7 inch Economy Panel PC incl. Connection Cable
  • Beckhoff CX5010-0111 - Controller Module
  • BECKHOFF AX2020-S62000-520 - SERVO DRIVE 5.76
  • Beckhoff EL1904 - 4-Channel Digital Input Module
  • BECKHOFF AX5201-0000 - Servo Drive
  • Beckhoff CP7201-1000-0000 - Industrial PC with Touch Screen
  • Beckhoff BK7350 - module Bus Coupler
  • BECKHOFF C6930-0010 - PLC PC Industrial PC
  • Beckhoff AX5125-0000 - Servo Amplifier
  • Beckhoff CX2100-0914 - Power Supply for External UPS for CX20xx
  • Beckhoff CP6608-1000-0010 - Control Panel
  • Beckhoff EL7221-9014 - EtherCAT Terminal, 1 Channel Motion Interface, 48 V DC
  • BECKHOFF CP2919-0000 - Multitouch Built-In Control Panel 24VDC 19"
  • BECKHOFF C6015-0010 - TWINCAT2 Single Core 1.46GHz Industrial PC
  • Beckhoff CU8803-0000 - Controller Module Transmitter
  • BECKHOFF CU1521-0000 - EtherCAT media converter
  • Beckhoff CX5140-0111 - Control Embedded PC HW 3.1 + Flash Card CX2900-0028 4GB
  • Beckhoff AX2513-B200 - Servo Amplifier Servodrive
  • Rexroth MSK061C-0600-NN-M1-UP1-NNNN - Engine Servo Motor
  • Beckhoff AM3031-0C01-0000 - Servo Motor
  • BECKHOFF CP7201-1000-0000 - Industrial PC with touch screen
  • BECKHOFF C6925-0000 - PLC Module Industrial PC
  • BECKHOFF EL5151-0021 - PLC module Encoder Interface
  • Beckhoff CX5130-0125-1001 - Module Embedded PC
  • BECKHOFF EP3356-0022 - EtherCAT Box Module
  • BECKHOFF AX5203-0000 - SERVO DRIVE
  • B&R X20IF1082 - COMMUNICATION INTERFACE MODULE POWER LINK
  • BECKHOFF EL7342 - PLC Module 2-Channel DC Motor Output
  • BECKHOFF CX8190 - Ethernet Controller
  • BECKHOFF CX2020-0120/4GB - CPU CX2100-0904 3x EL6900 EL1904 16GB RAM
  • Beckhoff CX5130-0112 - Module Embedded PC
  • Beckhoff CP7701-0001-0020 - Panel-PC Touch Panel 12" ELO Accutouch AMD ALX 500MHz
  • BECKHOFF CX5020-0111 - Embedded PC Controller
  • Beckhoff CX2040-0100 - Embedded PC HW: 4.0 + CX2100 0014 + 4GB CFast Card
  • Beckhoff CP6512-0001 0030 - Control Panel
  • beckhoff CX9020-0111-0900 - Controller Modules
  • Beckhoff IE3112 - Module Fieldbus Box
  • BECKHOFF CX8051 - PLC Module
  • BECKHOFF CX1100-0920 - module Power Supply
  • Beckhoff CP7921-1075-0000 - Control Panel
  • B&R 3NC352.6 - PLC Module
  • Beckhoff CX8095 - module Controller
  • beckhoff CX1020-0021 - CPU controller module
  • BECKHOFF BK9103 - PROFINET BUS COUPLER
  • Beckhoff C6930-0050 - Schaltschrank-Industrie-Pc Core i7-4700 CPU+FC9062 Modules
  • Beckhoff AM8013-0DH0-1001 - Servo Motor
  • BECKHOFF EPP3184-0002 - Module EtherCAT-P Box
  • BECKHOFF AM8041-0H10-0000 - servo motor
  • BECKHOFF CX1010-0100 - Embedded PC Module System
  • beckhoff CP2916-0000 - Industrial touch screen
  • Beckhoff C6110 - Industrial PC Boser HS6237
  • Beckhoff CX1010-0111 - CPU Module Setup
  • Beckhoff EL3751 - EtherCAT Terminal 1 Channel Analog Input Multifunction 24 Bit
  • BECKHOFF AX5721-0000 - Encoder Interface Card
  • Beckhoff CX1020-0122 - module Embedded PC
  • BECKHOFF CP3921-0000 - Control Panel
  • BECKHOFF CX2040-0155 - STANDARD CPU MODULE INTEL I7 2715QE 2.1GHz
  • BECKHOFF CX5020-0111 - Controller module
  • Beckhoff AX5201-0000-0200 - servo drive
  • BECKHOFF CP2921-0000 - Multi-touch built-in Control Panel with DVI/USB
  • BECKHOFF CP3907-0000 - Touch Panel
  • Beckhoff CX5120-0115 - CPU Module
  • Beckhoff KL3361 - PLC Module Oscilloscope Terminal
  • Beckhoff CX1000-0111 - Embedded PC System Combination
  • Beckhoff AM8023-0E20-0000 - Servo motor with Tramec EP75/2 Transmission
  • beckhoff am8533-2f10-0000 - servo motor
  • BECKHOFF EL5042 - EtherCAT Terminal
  • Beckhoff CX9001-1001 - PLC Module
  • BECKHOFF CX9020-0112 - Digital Module CPU Controller
  • BECKHOFF CP6709-0001-0000 - Touchpanel
  • Beckhoff 1004B2060000 - Communication Module
  • Beckhoff CX5020-0112 - PLC Controller
  • BECKHOFF EL2904 - EtherCAT Safety Input Output Module 24V
  • Beckhoff CX2040-0142 - Embedded PC Controller Module
  • BECKHOFF AM8121-0F20-0000 - SERVO MOTOR
  • Beckhoff CX9020-0112 - CPU Module
  • BECKHOFF CB3050-0008 - PCB Motherboard Board
  • Beckhoff EK1512-0010 - PLC Module EtherCAT Junction
  • BECKHOFF CX1001-0121 - Embedded PC And CPU Basic Module Controller
  • Beckhoff C6032-0070 - Industrial PC
  • Beckhoff CX1020-0122 - Module Embedded PC
  • BECKHOFF CX8010 - Controller Module
  • BECKHOFF EK1818 - Modules EtherCAT Bus Coupler
  • BECKHOFF CX5140-0155 - PLC Embedded PC
  • BECKHOFF CX1100-0910 - Power Supply Module
  • Beckhoff CX1001-0121 - CPU Module + CX1000-C00L + CX1100-0002 + CX1000-N001
  • Beckhoff CP6801-0001-0010 - Control Panel
  • BECKHOFF BK9103-1005 - Bus Coupler PROFINET
  • Beckhoff AX5203-0000-0202 - 161336 Digital Compact Servo Amplifier 2 Channel
  • BECKHOFF CX5020-0111 - Controller module
  • BECKHOFF CP7032-1031-0010 - Cp-Link Control Panel
  • Beckhoff AX5112-0000-0200 - Servo Driver
  • Beckhoff BX8000-0000 - RS232/RS485 Bus Terminal Controller | HW:1.4
  • BECKHOFF CX2020-0120 - CPU MODULE WITH CX2100 Power Supply
  • Beckhoff EL4012 - Module EtherCAT Terminal
  • BECKHOFF CP6204-0001-0030 - ECONOMY INSTALLATION CONTROL PANEL
  • Beckhoff CP6833-0001-0011 - Built-In Control Panel-Without Control Panel Monitor
  • BECKHOFF EK1521-0000 - module EtherCAT junction
  • Beckhoff EP3314-0002 - EtherCAT Compact Box M12 4x Analog Input Thermoelements
  • Beckhoff CX8090 - PLC modules Controller
  • Beckhoff AM8033-0JG0-0000 - Servo Motor
  • Beckhoff CP9035.2 - CP9035 capture card
  • Beckhoff CP7802-1241-0010 - Industrial Touchscreen 15 Inch
  • Beckhoff BX8000-0000 - Module Bus Terminal Controller
  • BECKHOFF IE1002-0000 - Junction box
  • Beckhoff AM237S-0021 - Servomotor
  • Beckhoff EL2564 - EtherCAT Terminal, 4-channel LED output, 5-48VDC, 4A, RGBW
  • BECKHOFF EL1918 - EtherCAT Terminal 8-Channel Digital Input 24V DC
  • Beckhoff CB3052-0005 - Circuitboard Motherboard
  • Beckhoff AM8023-2E11-0000 - Servomotor
  • Beckhoff CX8190 - Ethernet Controller
  • BECKHOFF EL4038 - Module EtherCAT Terminal
  • B&R 5PC910.SX01-00 - APC910 Industrial PC | i5-6440EQ 8GB
  • Beckhoff CP9030-A002 - CP-Link Karte Version: 1.1
  • BECKHOFF BK7200 - CTNET Control Techniques Bus Coupler
  • Beckhoff CP2616-0000 - Multi-Touch Touchscreen Panel for 24V DC Automation
  • BECKHOFF LOT 31 modules - PLC Module Bundle
  • BECKHOFF EJ2889-0000 - Module EtherCAT Plug-in Module
  • BECKHOFF AM8043-0H20-0000 - Servomotor
  • BECKHOFF EL3154 - module EtherCAT Terminal
  • Beckhoff C6017-0030 - Industrial PC
  • BECKHOFF CX9020-0112 - CPU Module