+086-15305925923

K-WANG

Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
新闻动态
newS
   
Brand

ABB 615 series ANSI protection and control

From: | Author:Wang | Time :2025-07-16 | 75 visit: | Share:

ABB 615 series ANSI protection and control

Product overview

The ABB 615 series is a series of protection and control products that have undergone partial testing according to relevant standards and meet all specified requirements without any misoperation, malfunction, or electrical damage. This series of products is manufactured by ABB Oy Distribution Solutions, and the relevant testing is approved by ABB Inc. Distribution Solutions and Distribution Automation.


Test object

Main test models include RED615 (order number HBDDFEADNLA1BMD11G), REF615 (order number HBFNAEFCNHA1AQB21G), REG615 (order number HBGDBDADNBA1BFG1G1), and the test results are also applicable to other products in the 615 series.

Basic modules: Each model includes CPU module, power module, binary I/O module, analog input module, LHMI module, communication module, backplane module, etc. The module types and parameters of different models may vary slightly. For example, RED615 uses PSM0004 power module, REF615 uses PSM0003 power module, etc. In addition, type testing was conducted on the IEC LHMI module DIS0012, and since the PCBA of ANSI and IEC LHMI are the same, the test results are also applicable to the ANSI LHMI module DIS0014.

REX615 - Protection and control products for power distribution ...

Various test results

Mechanical structure inspection: Marking and mechanical structure comply with IEC 60255-1 and IEC 60255-27 standards; The embedded shell level is IP 54 on the front and IP 10 on the back and connection terminals, in compliance with IEC 60529 standard; The electrical clearance and creepage distance comply with IEC 60255-5 and IEC 60255-27 standards, and the results are both OK.

Overload and input testing: Under rated current, rated voltage and other parameters, the thermal tolerance, dynamic current tolerance, input impedance, load, voltage tolerance, etc. all meet the requirements of IEC 60255-1 and IEC 60255-27 standards. For example, for a rated current of 0.2/1A, the continuous thermal tolerance is 4A, and the 1-second thermal tolerance is 100A.


Power module testing: In terms of auxiliary voltage, PS-H has no effect at 38... 300 VDC, 38... 264 VAC, and PS_L has no effect at 12... 72 VDC; In the voltage drop immunity test, the product can operate normally or restart under different voltage and residual voltage conditions; During the auxiliary power supply voltage interruption test, the product was able to shut down and restart normally; The tests for DC auxiliary voltage ripple, gradual shutdown and startup, and DC power polarity reversal all meet the requirements; At the same time, the power consumption of different power modules is provided.

Contact testing: Different types of contacts (bipolar power output, unipolar power output, signal output, etc.) meet the requirements of IEC 60255-1 and IEEE C37.90-2005 standards in terms of making ability, breaking ability, mechanical tolerance, etc. For example, the bipolar power output continuously carries a current of 8A, and the 3-second turn-on and carrying current are 15A, etc.


Electromagnetic compatibility testing: Pulse interference testing at 1MHz/100kHz, pulse interference testing at 3MHz and other frequencies, electrostatic discharge testing, radio frequency interference testing, surge immunity testing, power frequency magnetic field immunity testing, and other electromagnetic compatibility tests all comply with the requirements of corresponding standards (such as IEC 61000-4 series, IEC 60255-26, etc.).

Insulation testing: dielectric testing, impulse voltage testing, insulation resistance measurement, protective grounding resistance testing, etc., in accordance with the requirements of standards such as IEC 60255-27 and IEEE C37.90-2005. For example, passing the dielectric test under the conditions of 2kV, 50Hz, and 1 minute.


Mechanical testing: vibration testing, impact and collision testing, earthquake testing, mechanical durability testing, etc., in accordance with the Level 2 requirements of standards such as IEC 60068-2 series, IEC 60255-21 series, IEEE C37.90-2005, etc.

Environmental testing: dry heat testing, dry cold testing, wet heat testing, temperature change testing, storage testing, etc., in accordance with the requirements of IEC 60068-2 series, IEEE C37.90-2005 and other standards. For example, the dry heat test passed at+55 º C for 96 hours and+85 º C for 16 hours (some products passed at+70 º C).


Characteristic

Compact and flexible design: adopting a withdrawable unit design, the structure is compact, occupies small space, and is easy to install, test, and maintain. Products such as REF615 and RET615 have a pull-out design that facilitates replacement or maintenance during equipment operation, and are compact in size, making them suitable for space limited substations and other locations. This design can also reduce the space required for equipment installation, improve space utilization, and reduce equipment costs.

Comprehensive functionality: covering multiple protection and control functions, capable of meeting the needs of different power systems. For feeder protection, it has functions such as underground and overhead cable fault detection (CFD), high impedance (HIZ) fault detection, arc flash detection (AFD), etc. REF615 can effectively detect and respond to various faults during feeder operation. In terms of transformer protection, sensitive differential protection is used for inter turn faults, overexcitation (V/HZ) protection, etc. RET615 can provide comprehensive protection for transformers. In addition, it also includes various protection functions such as overcurrent, thermal overload, grounding fault, overvoltage, undervoltage, as well as special functions such as frequency protection and phase discontinuity protection, comprehensively ensuring the stable operation of the power system.


Good communication compatibility: Supports multiple communication protocols, including IEC 61850 (supporting Edition 2 and Edition 1, including HSR, PRP, GOOSE messaging, and IEC 61850-9-2 LE), IEEE 1588 V2 (for high-precision time synchronization) Modbus ®、 DNP3, etc. Through these protocols, the product can communicate and interoperability with devices from different manufacturers, facilitating the construction of complex power automation systems, achieving data sharing and remote monitoring, and enhancing the level of system intelligence.

High reliability: Through careful design and selection of high-quality components, the product has strong reliability and can provide stable and high-quality electricity, reducing equipment failures and power outages. For example, in some industrial sites with extremely high requirements for power reliability, such as steel plants, data centers, etc., the 615 series products can operate continuously and stably, ensuring normal production and business operations, and reducing losses caused by power problems.


Easy to upgrade and maintain: With ready-made standard configurations, it is convenient to quickly set up and customize, supports flexible system upgrades, and does not require rewiring or component replacement. When expanding or upgrading the system, users can achieve it through software configuration or adding modules, reducing upgrade costs and complexity, and improving system adaptability. In addition, it also provides a wide range of lifecycle services, such as training, customer support, maintenance, and modernization, to provide users with comprehensive protection.

ABB RET615 ANSI Transformer protection and control Numerical Relay


  • Kollmorgen Seidel 65WKS-CE310/6PB - Servo Drive Control
  • Kollmorgen U9M4T - Servodisc DC Motor, With Harmonic Drive Transmission
  • KOLLMORGEN TT-2952-1010-B - INLAND BRUSH SERVO MOTOR WITH TACH
  • ONE VF-RA2474N-5/10/12/15 - Servo Drive Power Cable
  • Kollmorgen S30601-NA - Servostar 346 + EtherCat
  • Kollmorgen HDIL100P1 - Direct Drive Linear Hall Effect Assembly
  • Kollmorgen TT-4239-1010-AA - DC Servo Motor 875 RPM
  • PMI Kollmorgen 00-00907-999 - ServoDisc DC Motor 0.5" Diameter Shaft
  • INLAND KOLLMORGEN TT-2952-1010-B - MOTOR (USES RESOLVER)
  • KOLLMORGEN CTI-187-2 - BRUSHLESS MOTOR DANAHER MOTION
  • Kollmorgen 12-0857 - Lead Screw Electric Cylinder without Motor
  • Kollmorgen AKM13C-ANCNR-00 - Servo Motor
  • kollmorgen 6sm, 10m - Cable
  • KOLLMORGEN ME2-207-C-94-250 - GOLDLINE SERVOMOTOR-ENCODER COMMUTATED
  • Kollmorgen MT308A1-R1C1 - GoldLine Motor
  • Kollmorgen 73 & 54 cm Travel - Ironless Linear Motors on THK Rail
  • Kollmorgen AKM53H-ACCNR-00 - Servo Motor
  • Kollmorgen PA5000 - Power Supply
  • KOLLMORGEN D082M-12-1310 - GOLDLINE DDR DIRECT DRIVE ROTARY MOTOR 230Vrms 300 RPM
  • Kollmorgen RBEH-01210-A14 - Brushless Motor, Heidenhain D-83301
  • KOLLMORGEN Servotronix PRD-CC18551H-11 - Servo Board
  • Kollmorgen DH083M-13-1310 - Ho Direct Drive Rotary. Max Speed: 400/500 RPM
  • KOLLMORGEN BMHR-4.8XX - INLAND MOTOR
  • Kollmorgen Seidel 84421 - Motor Cable 20 Metre 6SM 27/37 AKM DBL Engines
  • Kollmorgen AKD1207-NBCC-0000 - Drive
  • HP Indigo / Kollmorgen VLM32H-ALNR-00 - Motor
  • SUPERIOR ELECTRIC / KOLLMORGEN GM05009005 - POWERSTAT 50 AMP VARIAC w/ PMI MOTOR
  • Kollmorgen CM12A1-015-033-00 - MOTOR CABLE for AKD B/P/T/M Motor AKM 1-7 Cable
  • Kollmorgen U9M2 - DC Motor
  • Kollmorgen AKM11C-ANMN2-00 - 3-Phase PM Servo Motor 110W
  • Kollmorgen 60-023168-000 - MOTOR GEARBOX ASSEMBLY SERVODISC DC NO REAR SHAFT
  • Kollmorgen AS10300 - servo drive servo star Cincinnati
  • Kollmorgen AKM23D-EFC2C-00 - Servo Motor AKD Drive
  • KOLLMORGEN E33HRFB-LNK-NS-01 - STEPPER MOTOR 2.7AMP 251W 1500RPM 170V
  • Kollmorgen AKM21G-ENM2DB00 - Servomotor
  • KOLLMORGEN SERVO STAR 620-AS - 230-480V 20A Servo Drive
  • Kollmorgen CFE0A1-002-006-00 - Encoder Cable 6.00m
  • KOLLMORGEN AKM21C-ANM2DBOO - PM SERVOMOTOR
  • Kollmorgen 03200-2G205A - ServoStar Servo Drive
  • Kollmorgen CR10251 - SERVOSTAR CD AC Servo Driver
  • Kollmorgen VF-DA0474N-03-0 - 10 Ft Feedback Cable
  • KOLLMORGEN AKM21S-ANMNR-03 - Servo Motor
  • Danaher Motion Kollmorgen S403AM-SE - Servostar 443M-S Servo Drive
  • Kollmorgen Seidel digifas 7204 - Servo Amplifier Digital
  • Kollmorgen Industrial Drive B-406-B-A1-B3 - Goldline Brushless Servomotor
  • Danaher Motion S20630-CNS - Servo Kollmorgen S200 Series
  • KOLLMORGEN B-206-A-31-B3 - GOLDLINE BRUSHLESS PM SERVO MOTOR 1400RPM
  • Kollmorgen Seidel SR6-6SMx7 - 4m Cable
  • Cincinnati Milacron Kollmorgen Vickers PSR4/5-250-7500 - Power Supply
  • Kollmorgen AKM 13C-ANCNR-00 - Gripper Handling with Neugart PLE 40 gears
  • Kollmorgen SERVOSTAR 403 A-P - 3a servo drive
  • KOLLMORGEN S6M4H - INDEXER ASSY SERVO MOTOR
  • SERVOMOTOR KOLLMORGEN SEIDEL 6SM 57M-3.000-G-09 - Servo Motor
  • Kollmorgen VP-507BEAN-03 - Valueline AKD 10 Ft Power Cable
  • KOLLMORGEN 28454 - SERVO DRIVE, SERVOSTAR 300 SERVOSTAR 310
  • KOLLMORGEN TT-4205-4017-C - INDUSTRIAL DRIVE DC MOTOR
  • Kollmorgen T150551 - Servostar 343 Control Drive
  • Kollmorgen ICD05030A1C1 - Platinum DDL Direct Drive Linear Motor w/ 30" Rail Way
  • Kollmorgen SERVOSTAR 303 S30361-SE - Servo Drive
  • Kollmorgen 00-00907-002 - ServoDisc DC Motor Varian Semiconductor 3500054
  • Kollmorgen CM12A1-025-005-00 - MOTOR CABLE for AKD B/P/T/M Motor AKM 1-7 Cable
  • KOLLMORGEN MOTION TECH IL18100A3TRC1 - BRUSHLESS LINEAR MOTOR PLATINUM DDL
  • Kollmorgen SERVOSTAR 406 M-C - Servo Drive FW: 7.36
  • Kollmorgen IC11030A1P1103 - platinum direct drive linear motor
  • W&T 10/100BaseT - Com Server Highspeed 3×RS232/RS422/RS485
  • Kollmorgen S30361-NA - drive brand
  • Kollmorgen Industrial Drives PSR3-208/50-01-003 - Power Supply
  • Kollmorgen RBE-03011-A00 - Brushless Frameless Servo Motor, OD: 5-5/64"/129mm
  • Industrial Drives SBD2-20-1101-5301C2/160-20 - Servo Amplifier Board For Parts
  • Industrial Drives SBD2-20-1101-5301C2/160-20 - Servo Amplifier Board For Parts
  • Industrial Drives SBD2-20-1101-5301C2/160-20 - Servo Amplifier Board For Parts
  • Kollmorgen IC44030A2P1 - LINEAR DRIVE MOTOR
  • KOLLMORGEN AKM22E-ANS2R-02 - servo motor + Micron X-TRUE 60
  • Kollmorgen 18442-01B - Pendant (E2)
  • Kollmorgen AKD-P00306-NBEC-0069 - Drive
  • Kollmorgen AKM53H-ACCNR-00 - Servomoteur
  • Kollmorgen AKD-P01207-NACN-0056 - Servo Drive
  • Kollmorgen SERVOSTAR 403a-c - Servo Drive
  • Kollmorgen B-204-B-39-016 - Servo Motor
  • Giddings & Lewis Dahaner Motion Kollmorgen M.1017.3140 R3 - Output Module
  • Kollmorgen KNSG300 - Emergency Light Unit
  • KOLLMORGEN 62-0050 Model T31V-EM-C0 - Servo Motor Shaft Size 3/8" Dia 1-1/4" Long
  • Kollmorgen S30601-NA-ARM9 - SERVOSTAR346 Controller w/o Fan As Is
  • Kollmorgen PMI Motors 00-00903-010 - ServoDisc DC Motor Type U9M4H 1/2" shafts
  • Kollmorgen PMI Motion U12M4 - Servo Disc DC Motor Universal Instruments 11467000
  • Kollmorgen AKM53H-accnr-00 - Servo Motor
  • DANAGER MOTION / KOLLMORGEN ACD4805-W4 - (70A ) Vehicle / Motor Controller
  • Kollmorgen s60300 - SERVOSTAR 603 3 x 230-480v 2kva
  • KOLLMORGEN B-404-C-21 - GOLDLINE BRUSHLESS P.M. SERVOMOTOR
  • Kollmorgen T-5144-A - GE Aviation 739034-01 Direct Drive DC Torque Motor
  • KOLLMORGEN M.1302.8761 - CABLE, POWER
  • Kollmorgen CE03250 - Servostar Servo Drive
  • Kollmorgen K-342 - dual axis automatic autocollimator
  • Kollmorgen TT-4500-1010-B - Inland Motor
  • Kollmorgen S20260-Srs - Synqnets200 Series Servo Drive Forparts
  • Kollmorgen PRDRHP720SND-65 - drive CR06703-R
  • KOLLMORGEN S70362-NANANA - driver
  • Kollmorgen CR06260-000000 - SERVOSTAR CD AC Servo Driver
  • KollMorgen akd-m00306-mcec-D000 - Multi-Axis Master Programmable Drive AKD PDMM
  • KOLLMORGEN S61000 - SERVOSTAR 610 3X230-480V 10A
  • Kollmorgen AKD-P00306-NBCC-0000 - AKD Servo Drive
  • KOLLMORGEN CP306250 - SERVOSTAR SP Servo Drive
  • Kollmorgen MPK411 - controller
  • Kollmorgen S64001 - SERVOSTAR 640, factory-certified
  • Kollmorgen Servotronix Prdr0087006Z-00 - Lvd Servo Drive
  • Kollmorgen AKD-P00306-NAAN-0000 - Servo Drive Controller, 1.2KVA, 240Vac, 3 Phase
  • Kollmorgen MCSS08-3232-001 - MCSS06-3224-001 ServoStar Drives (AS-IS)
  • Kollmorgen CR06250-2D063A - drive
  • YASKAWA SGDP-04APA - SERVOPACK SERVO DRIVE
  • Kollmorgen s62001 - servostar 620-as 14kva 20a ip2o 3x 230-480v
  • Kollmorgen Seidel S60100 - Servostar 601 Servo Drive
  • KOLLMORGEN CR06703-R - HP SERVOSTAR CD CONTROLLER
  • kollmorgen Prdr0052200z-05 - graco inter Servo Component
  • KOLLMORGEN S403AM-SE - drive SERVOSTAR 443M-S
  • YASKAWA SGDP-01APA - SERVOPACK SERVO DRIVE
  • Kollmorgen CE06200-1H348H - SERVOSTAR CD Servo Driver
  • Kollmorgen S71262-NANANA - S700 Servo Amplifier 208Y/120V 480Y/277V
  • Kollmorgen S70302-NANANA-NA - S700 Servo Driver
  • KOLLMORGEN S61401-560 - ATS-SERVOSTAR 614-AS Servo Drive
  • KOLLMORGEN Industrial Drives BDS4A-103J-0001/102A21P - Servo Controller
  • Kollmorgen S71202-NANANA-NA-024 - S700 Servo Driver
  • KOLLMORGEN S70302-NANANA - driver
  • Kollmorgen CR06250 - SERVOSTAR Servo Drive
  • Kollmorgen CE03550 - drive
  • Kollmorgen S71202-NANANA - S700 Servo Driver
  • Kollmorgen AKD-B01206-NAAN-0000 - AKD Servo Drive
  • INDUSTRIAL DRIVE KOLLMORGEN PSR4/5A-112 - POWER DRIVE SERVO
  • Kollmorgen CE06260-000000 - Servostar CD Servo Driver