ADLINK MVP-6200 series fanless expandable industrial computer



ADLINK MVP-6200 series fanless expandable industrial computer

Product positioning

The 12th generation Core high-performance expandable fanless industrial host adopts the MVP-6100 expansion architecture and upgrades the 12th generation Alder Lake platform, DDR5, 2.5G TSN network, four-way 4K display, 9-32V ultra wide voltage, and three-way M.2 wireless storage expansion. It is designed for demanding scenarios such as high-end machine vision, multi axis motion control, multi acquisition industrial gateway, and vehicle industrial control that require PCI/PCIe expansion; Single side centralized I/O, fully passive fin heat dissipation, wall mounted installation.

Differentiation of Full Series Models and Core Hardware

1. Processor lineup (LGA1700 R680E chipset, all models support vPro AMT and TPM2.0)

Model suffix CPU specification Power consumption Operating temperature upper limit

9 i9-12900E 65W high power consumption 50 ℃

7 i7-12700E 65W high power consumption 50 ℃

7T i7-12700TE 35W low-power 60 ℃

5T i5-12500TE 35W low-power 60 ℃

The standard temperature for the 65W model is 0-50 ℃, while the industrial SSD has a wide temperature range of -20~50 ℃;

35W T series standard 0~60 ℃, industrial SSD wide temperature range -20~60 ℃;

2. Two major expansion backboards (core size difference)

MVP-6220 (2-slot narrow chassis)

Backboard: 1 x PCIe Gen4 x16+1 x standard 32-bit PCI (ITE bridge);

Chassis size: 210 (W) × 240 (D) × 165 (H) mm, total weight 5.01kg;

MVP-6240 (4-slot wide chassis)

Backplane: 1 x PCIe Gen4 x16+2 x PCIe Gen3 x4+1 x PCI;

Chassis size: 210 (W) × 240 (D) × 206 (H) mm, total weight 5.4kg;

The maximum height of the expansion card is uniformly 111.28mm, and the length varies with the thickness of the SSD: ≤ 9.5mm hard drives can be up to 200mm long, and 9.5-15mm hard drives can be up to 195mm long.

3. Memory and multi-channel storage

Memory: 4-channel DDR5 3600 SO-DIMM slots, maximum 128GB for the whole machine, far ahead of the 32GB upper limit of the previous generation;

Triple M.2 layered expansion (standard across the entire range)

M Key 2280: PCIe Gen3 x4 NVMe high-speed solid-state;

B Key 3042/3052:5G cellular module, paired with dual Micro SIM card slots;

E Key 2230: WiFi 6 wireless network card;

SATA storage: Built in 2 2.5-inch SATA hard drive slots, expandable to 3 SATA slots with additional kit; No CFast card slot (compared to MVP-6100 deleted).

4. Single side external I/O interface (universal layout across the entire range)

Display output (4 independent 4K channels, previous generation maximum 3 screens)

2×DP++（4096× 2304@60Hz ）+ 2×HDMI2.0（3840× 2160@60Hz ）R680E Core Display UHD770 Native Four Display Output;

Industrial network (3-channel 2.5G i225 TSN network card, MVP-6100 only gigabit)

Supports IEEE1588 precise clock VLAN、 Mega frame, WOL remote wake-up, PXE diskless, dual color network port lights distinguish 10/100M (green), 1G, 2.5G (orange), and link flashing;

USB interface (6-way high-speed)

4 x USB 3.2 Gen2 (10Gbps)+2 x USB 3.2 Gen2 (5Gbps), with a maximum power supply of 1.6A per port, suitable for direct supply of industrial cameras; The motherboard has one built-in USB 2.0 pin;

Serial port (4-channel DB9, reserved with built-in COM5/6 pins)

COM1/2 BIOS switch RS232/422/485, COM3/4 fixed RS232, compatible with PLC and frequency converter;

Digital IO (26Pin DB interface)

8-channel non isolated DI (input 2~5.25V high level)+8-channel open drain MOS DO, built-in 200 Ω pull-up, maximum 24mA per channel, with complete input-output circuit schematic attached;

Wireless antenna (6-way SMA, MVP-6100 without multiple antennas)

ANT1-4 is compatible with 5G modules, and ANT5-6 is compatible with WiFi;

Audio: Mic in, Line out (TEMPO 92HD91 audio chip)

Control and status indicator lights

Key: Power button (blue sleep flashing light), hardware reset, external remote power on/off pin;

6-way status lights: WD watchdog yellow, HD hard drive orange, DG fault green, three-way custom programmable green light;

Power supply (9-32V ultra wide DC, MVP-6100 only 12-24V)

Terminal block V+/V - input, suitable for vehicle mounted and multi voltage industrial sites, reverse connection permanently burns hardware; Comes standard with a 280W original 24V adapter.

Mechanical, environmental, and power consumption parameters

1. Installation method

Standard wall mount bracket, supporting installation on both the back and side. The chassis bracket is fixed with 6 M4 screws, and the wall can be hung with a keyhole and locked with threads;

2. Environmental tolerance

Storage temperature: -40 ℃~85 ℃ (excluding hard drive);

Humidity: 95% no condensation at 40 ℃ environment;

Vibration shock: SSD working condition 5Grms three-axis, 50G half sine 11ms shock; Mechanical hard drive only 0.5Grms;

ESD protection: Contact ± 4KV, air ± 8KV;

3. Full load power consumption (24V test)

The top of the line i9 has a standby power of 3.7W, no load power of 59.4W, CPU full load power of 101W, and full load power of 147W, with a recommended 280W power supply.

Internal hardware structure of the whole machine

1. Layout of connectors on both sides of the motherboard

Top layer of motherboard: 4 DDR5, LGA1700 CPU, M.2 NVMe, three-way Ethernet ports, video output, debugging and burning interfaces;

Bottom layer of motherboard: M.2 WiFi/5G, dual SIM, dual SATA, RTC lithium battery, 4-pin temperature control fan, dual I2C sensors, remote power on/off, COM/DI cable, backplane power supply, DB40 debugging port;

2. Two expansion backplane drawings

2-slot backplane: PCIe x16, PCI slot, SATA signal/power supply, built-in USB;

4-slot backplane: PCIe x16+dual PCIe x4+PCI, multiple SATA, fan power supply;

3. Functional block diagram of the whole machine bus

Fully display the R680E PCH and 12th generation Alder Lake processor DMI4 bus topology, clearly allocate PCIe channels to expansion backplane/M.2, SATA storage, LPC mounted TPM2.0/NCT6126 Super IO, serial DI/O, HDA audio, fan temperature control, 9-32V power management link.

Quick Installation Practical Chapter

Standard packing accessories

Host, DC power terminal, wall bracket, complete set of fixing screws; Optional 280W adapter, external cooling fan, 5G/WiFi M.2 module;

Hardware step-by-step assembly (with actual photos)

SSD: Two rack schemes, supporting 9.5mm/15mm thick 2.5-inch hard drives;

DDR5 memory: equipped with thermal pads to assist in heat dissipation;

M. 2 Wireless: Install WiFi and 5G modules separately and connect them to the corresponding antennas;

Expansion card: Remove the chassis cover and insert the PCI/PCIe card vertically, then lock it in place;

Mandatory specification for power supply

Before powering on, check the positive and negative poles. Only use industrial power supplies certified by LPS/SELV, with a maximum working altitude of 2000 meters;

Driver acquisition

Download the complete set of drivers for the MVP-6200 product page on Linghua's official website: chipset, UHD core display, 2.5G network card, audio, DI/O, Intel AMT remote management driver.

Appendix B: Complete BIOS Setup Manual

Press DEL to enter BIOS when booting up, press F7 to bring up the one-time boot menu, and there are seven settings pages:

Main page: BIOS version, CPU/memory hardware information, system time and date;

Advanced (Core Configuration)

CPU: Large and small core switch, hyper threading, VT virtualization, SpeedStep/Shift, TCC temperature protection;

Power management: power-off and power on status, RTC timed power on, PCIe port wake-up;

Serial port redirection, USB global switch, TPM 2.0 encryption;

Onboard peripherals: serial RS232/485 mode switching, three-way 2.5G network port start stop;

Hardware monitoring: fan three mode speed regulation (manual/automatic/SMART four section temperature control), real-time reading of voltage and temperature;

Hardware watchdog, UEFI network stack, Intel AMT vPro remote management;

Chipset chipset: memory timing, core graphics memory allocation, SATA/NVMe/VMD disk array, backplane PCIe rate configuration;

Security: administrator/boot password, Secure secure boot key management;

Boot start: device priority, quick start, digital lock;

Save&Exit: Save/Discard modifications, Factory restore EFI Shell；

MEBx: Intel AMT Remote Management Independent Configuration Menu;

Comes with Clear CMOS jumper fault recovery operation.

Development Tool Appendix (C/C++, Windows+DOS/Linux Dual Adaptation)

Appendix C Hardware Watchdog WDT

Used for automatic hardware restart when the program freezes:

Windows: Complete set of C APIs (initialization, setting seconds/minutes timeout, start stop, feeding dogs)+sample source code;

DOS/Linux: Direct operation of NCT6126 chip source code with underlying eSPI registers;

Appendix D: Digital DI/O Development Library

Windows specific interface, supporting single channel reading of DI level and output of DO switch quantity, suitable for pipeline sensor and relay control development.

Safety regulations

Before disassembling and assembling the memory/expansion card/wireless module, the power must be completely turned off. After the repair is completed, the chassis cover must be restored and then powered on again;

The large area of fins on the body dissipate high temperatures, and it is recommended to cool down before touching again to prevent burns;

RTC lithium batteries are prohibited from using incompatible models, and waste lithium batteries should be recycled in accordance with hazardous waste regulations;

Only for use in controlled industrial computer rooms, not suitable for household or children's activity areas;

Prohibit blocking the heat dissipation duct and keep away from liquid, corrosive, and high humidity environments;

The power terminal is only compatible with copper wires, with a tightening torque of 5.3 pound inches. The entire machine casing must be reliably grounded;

Immediately cut off the power and stop the machine if water enters, falls, or cables are damaged. Only authorized engineers are authorized to repair.