K-WANG

+086-15305925923
Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
新闻动态
newS
   
Brand

ADLINK cPCI-3610 Series 3U CompactPCI Single Board Computer

From: | Author:Wang | Time :2026-08-04 | 101 visit: | 🔊 Click to read aloud ❚❚ ▶ | Share:


ADLINK cPCI-3610 Series 3U CompactPCI Single Board Computer

Product basic positioning

CPCI-3610 is an entry-level low-power 3U CompactPCI controller blade board launched by Linghua. It uses Intel Atom low-power processors and is available in three width models (cPCI-3610, cPCI-3610D, cPCI-3610P): 4HP/8HP and 12HP. It is compatible with industrial CompactPCI chassis, supports hot swapping, and is designed for fanless, high shock resistant, and wide temperature industrial scenarios. It comes with a dedicated rear adapter module cPCI-R3610/cPCI-R3610T.


Core hardware configuration

2.1 Processor and Chipset

Three Intel Atom 45nm processors are available for selection, all of which integrate graphics cards and memory controllers:

N450 (single core): 1.66GHz, 512KB L2 cache, TDP 5.5W, Support fanless operation

D410 (single core): 1.66GHz, 512KB L2 cache, TDP 11W

D510 (dual core): 1.66GHz, 1MB L2 cache, TDP 13W, Stronger multitasking performance

Supporting chipset: Intel ICH8M; The BIOS is 16Mbit SPI flash AMIBIOS8.

2.2 Memory Design

Onboard soldered single channel DDR2-667/800 SDRAM, with a maximum capacity of 2GB; soldered memory has strong seismic performance and is suitable for high vibration conditions such as in vehicles and rail transit.

2.3 CompactPCI Bus Specification

Bus standards: PICMG 2.0 R3.0, PICMG 2.1 R2.0 (supports hot swapping)

Bus specification: 32bit/33MHz PCI, compatible with 3.3V/5V IO voltage, only used as a host board (Host)

Expansion slot: cPCI-3610P equipped with 1 expansion slot, optional 32bit/66MHz PMC or PCIe x1 XMC daughter card


Full interface resources (divided into front panel and rear RTM module)

3.1 Distinguish three models of front panel I/O

Interface type cPCI-3610 (4HP single slot) cPCI-3610D (8HP dual slot) cPCI-3610P (12HP triple slot)

Gigabit Ethernet ports 2 x Intel 82574L PCIe Gigabit 2 x 2

USB 2.0 2-channel 4-channel 4-channel

VGA display DB15, maximum QXGA (2048 × 2048) 1536@60Hz )Yes, there is

Serial COM without 1 channel DB9 (RS232/422/485 optional) 1 channel

PS/2 keyboard mouse without 1 group, 1 group

Audio (Line in/Out) None None None

Local storage CF card slot CF+2.5-inch SATA hard drive holder CF+2.5-inch SATA hard drive holder

PMC/XMC expansion bit None None

3.2 Rear adapter module cPCI-R3610/cPCI-R3610T

Both RTMs are compatible with 8HP chassis, with only different depths (50mm/80mm), and have a unified output at the rear:

2 Gigabit Ethernet, 2 RS232/422/485 serial ports, 1 USB 2.0

2-channel 7-pin SATA storage interface, VGA video output

Network port/VGA/serial port support software switching between front and rear panel outputs

3.3 Storage Solution

Onboard: CompactFlash slot; 8/12HP model comes with a 2.5-inch SATA hard drive direct connection socket

RTM rear: dual SATA interfaces, capable of connecting a second hard drive externally

Core functional characteristics

Display output

CPU integrated core display, supporting DirectX9 and Intel clear video technology; DB15 VGA analog interface, with a maximum resolution of 2048 × 1536, and the screen can be switched between the front and rear panels.

Watchdog WDT

Programmable reset timer, timing range 1 second to 65535 minutes, timeout can trigger system reset or NMI interrupt; The onboard button lithium battery stores RTC clock and CMOS parameters.

Hardware monitoring

Real time collection of CPU temperature, overall machine temperature, and various DC voltages, and any abnormalities can be handled in conjunction with a watchdog.

Indicator light

Green power LED and red watchdog alarm LED on the front panel.


Operating system support

Compatible with mainstream industrial desktops and real-time systems:

Windows: XP Professional Edition, Win7 (32/64 bit)

Linux:Fedora 12、RedHat Enterprise Linux 5.3

Real time OS: Wind River VxWorks 5.5.1/6.7

Other systems can contact Linghua for driver support.


Mechanical and Environmental Specifications

6.1 Dimensional specifications

Standard 3U CompactPCI, board size 100mm × 160mm; width divided into:

4HP (single slot) cPCI-3610

8HP (dual slot) cPCI-3610D

12HP (three slot) cPCI-3610P

6.2 Temperature and humidity

Standard working temperature: 0 ℃~+60 ℃

Wide temperature options: -20 ℃~+70 ℃; Ultra wide temperature range -40 ℃~+85 ℃

Storage: -40 ℃~+85 ℃

Humidity: up to 95% RH, no condensation

6.3 Resistance to vibration and impact

Non work impact: 15G, 11ms peak to peak

Random vibration at work: 1.88Grms, 5-500Hz full axis

6.4 Power consumption (100% CPU at full load)

N450 single core: about 15W, can be fanless

D510 dual core: approximately 19W

6.5 Certification

CE and FCC electromagnetic compatibility certification; Self cooling design, no need for forced cooling fan (N450 version)


Model Naming and Ordering Rules

Standard Model Format: cPCI - Model/CPU/Memory

Example:

CPCI-3610D/N45/M1G: 8HP, Atom N450, 1GB onboard DDR2 memory

cPCI-3610P/D51/M1G:12HP, Dual core D510, 1GB of RAM

CPCI-3610/N45/M1G: 4HP Narrow Edition, N450 Single Core

Supporting RTM rear module

CPCI-R3610:50mm Depth 8HP Rear IO Board

CPCI-R3610T: 80mm depth 8HP rear IO board

CPU、 The memory capacity can be customized and matched with Linghua agents.

  • Tetra / Alpha 600W H60552 - Switching Power Supply Unit
  • Bruker Alpha FTIR Spectrometer / Alpha-P ATR - Infrared Spectrometer FTIR Instrument
  • Simagic AlphaM-FX-C 290mm FX-C - Formula Steering Wheel with Alpha Mini Wheel Base
  • Alpha Wire 5152C 20/2C - XtraGuard High Performance Instrumentation/Control Cable
  • ALPHA WIRE 1219/40C SL005 - Multi-Conductor Cable Wire
  • ALPHA WIRE 3131441 TN005 - Multi-Conductor Cable Wire
  • ALPHA WIRE 2172-SV005 - Multi-Conductor Cable Wire
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • Olympus Endo Alpha Cart TI-A1 - Medical Equipment Cart with Accessories
  • ALPHA WIRE 74010-BK002 - Multi-Conductor Cable Wire
  • Fanuc A06B-6110-H026#N - ALPHA i Power Supply Module PSM-26i
  • Alpha Laval SX2/013 - Rotary Lobe Pump
  • Alpha II-450P MV4500007B - Switching Power Supply Unit
  • TDK-Lambda / Alpha 400W - Switching Power Supply Unit
  • ALPHA ALPHA6000E-3015GB/3018PB - Frequency Inverter Drive Power Converter
  • ALPHA WIRE 391245-WH005 - Hook-Up Wire
  • Alpha H60562 CA600 - 600W Switching Power Supply Unit
  • Fanuc A06B-0147-B675 - Alpha 22/2000 3.8kW 2000rpm AC Servo Motor
  • ALPHA WIRE 9821 - Twinaxial Cable 1PR 25AWG Poly Insulation
  • Fanuc / Alpha A16B-2203-0820 - ALPHA i Spindle Wiring PCB
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • Fanuc A06B-6096-H104 - Alpha Servo Module
  • Fuji Electric RYT202D5-VV2 / Faldic Alpha5 - Servo Amplifier
  • ALPHA WIRE 2817/6 20 AWG - PTFE High Temperature Cable
  • Aloka Prosound Alpha 10 / EU-6031C / JB-274D - High Voltage Power Supply for Ultrasound
  • Wittenstein Alpha SP 140S-MF1-5-01F-2S - Planetary Gearbox
  • FANUC A06B-6124-H205 - Alpha iSV Servo Amplifier Module
  • TDK-Lambda / Alpha MV6500314A - 650W Power Supply Unit
  • TDK-Lambda / Alpha H47318 - 400W Switching Power Supply Unit
  • Alpha H47318 - 400W Switching Power Supply Unit
  • CNC Bearing / Alpha AR090-S1-300-20-N - Robotics Bearing Component
  • Alpha CA400 5A,3.3Q,5B,12/12E / DXH47037 - 400W Power Supply Unit
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • Fanuc / Amada A04B-0810-C403 / LC1212 alpha II - Pressure Regulator
  • ALPHA WIRE 79012-SL005 - Multi-Conductor Cable Wire
  • Fanuc A06B-0146-B110 0001 - AC Servo Motor Alpha A22/1500 with Brake
  • Wittenstein Alpha SPK140-M3-100 - Planetary Gearbox
  • TDK-Lambda / Alpha H67027 / CA600 - 600W Switching Power Supply Unit
  • Alpha Innotech AlphaArray 7000 - Microarray Reader System
  • FANUC A06B-6117-H211 - Servo Amplifier Module Alpha iSV 160/160 Amp
  • ALPHA WIRE 5021C SL002 - Multi-Conductor Cable Wire
  • Alpha H47318 - 400W Switching Power Supply Unit
  • FANUC A06B-6078-H211#H501 / A06B6078H211H501 - Servo Amplifier Module
  • ALPHA WIRE 1219/40C SL005 - Multi-Conductor Cable Wire
  • Wittenstein Alpha SP-060S-MF1-10-1B1-2S - Planetary Gearbox
  • Beckhoff / Alpha AM3062-0K40-0000 + S100-MF1-10-2K0-2S - Servo Motor with Alpha Transmission
  • FANUC RDCGM00000004O / TP 050-MF1-7-061-000 - Gear Reducer / Alpha Gearbox
  • Basler A102K Alpha VIS - Black and White CCD Industrial Camera
  • Alpha SP 100G-MF1-4-0H1-2S-PGG - Planetary Gear Reducer
  • Fanuc A06B-6096-H306 - Alpha Servo Amplifier Module
  • ALPHA WIRE 5856-VI001 - Hook-Up Wire
  • Simagic FX PRO - Formula Steering Wheel SIM Racing Steering Wheel with Wheelbase
  • Adaptive Micro Systems 10181111 / 4120C - ALPHA ELECTRONIC MESSAGE DISPLAY SIGN
  • ELAU Schneider SH100/40060/0/0/00/00/00/10/00 + SP 075S-MF1-4-0E - AC Servo Motor with Alpha Planetary Gearbox
  • Alpha Wire 5002C-SL001 - Multi-Conductor Cable 2 Conductors 22AWG 300VAC
  • Alpha Wire 5152C 20/2C - XtraGuard High Performance Instrumentation/Control Cable
  • Wittenstein Alpha LPBK 090-M02-5-111 / VIA1001C02A0000 - Gear Box i:5 with Servo Motor
  • ALPHA WIRE 2845/7-RD001 - Hook-Up Wire
  • FANUC A06B-0143-B175 #0275 - Alpha 12/3000 AC Servo Motor
  • Densei-Lambda / Alpha MA4000591A/ME Alpha 400 / MV6500271A Alpha II-650 - Power Supply Unit
  • Siemens / Alpha 1FK7063-5AF71-1SG3 + LP 120-M02-50-111-000 - Servo Motor with Transmission
  • FANUC A06B-6290-H322 - ALPHA iSV 10/10/10HV-B 3-Axis Servo Drive
  • ALPHA WIRE 5021C SL002 - Multi-Conductor Cable Wire
  • Alpha H47016 / CA400 - 400W Switching Power Supply Unit
  • Thermo Scientific RadEye AB100 - Alpha-Beta Contamination Monitor
  • Tigear2 / Ultramite / SM cyclo / IPTS / Dodge / Cone / Boston / Alpha Gear Assortment - Industrial Gears Lot
  • FANUC A06B-6117-H211 - Servo Amplifier Module Alpha iSV 160/160 Amp
  • Lambda / Alpha H40896 - 400W Power Supply Unit
  • Wittenstein Alpha TPM 004F-016V-6PB1-053B-G5 - Rotary Servo Actuator i=16
  • Fanuc A06B-0253-B101 - Alpha 30i AC Servo Motor
  • Alpha VDT100-MF1-40-071-BC / 20018901 - Transmission Gearbox
  • FANUC A06B-6114-H207 - 2-Axis Servo Amplifier Module SVM20/40i Alpha i Series
  • Wittenstein Alpha TK+050S-MF2-50-5G1-1S10 - Right Angle Gearbox 50:1
  • Alpha VDS-063-MF1-4-1X1-AC - Worm Gearbox Reducer
  • Canberra iCam - Alpha/Beta Air Monitor and Pump System
  • Mitsubishi / Alpha HA33NCB-S + HA83NC-S + TP 025-MF1 + MDS-C1-V2-1003 - Servo Assembly with Gearbox and Drive
  • ALPHA WIRE 6363-SL002 - Multi-Conductor Cable Wire
  • Alpha SP 140G-MF2-28-0E1-2S-PGG - Planetary Gear Reducer
  • ALPHA WIRE 2842/19-YL001 - Hook-Up Wire
  • FANUC A20B-2101-0820 - ALPHA iPS Power Control Board
  • FANUC A06B-6117-H205 - Servo Amplifier Module Alpha iSV 20/20 Amp
  • Alpha RP 040S-MA2-27.5-3K1-2S - Planetary Gearbox i=27.5
  • NSS Galaxy / Alpha NSS Galaxy 20 and Alpha 16 - Floor Strip and Wax Slow Speed Buffer and Wet Vac
  • Aloka USM-28 - Ultrasound Machine Component for Prosound Alpha 10
  • Alpha Wire 1219/12C - Multiconductor Shielded Cable Wire 24AWG 1000Ft
  • ALPHA WIRE FIT-321-1-1/2 BK105 - Heat Shrink Tubing Wire Sleeving
  • FANUC A20B-2001-0933 / A20B20010933 - Control Circuit Board PCB
  • Hyva Alpha FC A4.5-3-98-K6-1DA-HC / 70593139 - Dump Body Hydraulic Cylinder
  • Alpha H40042 - 400W Power Supply Unit
  • Titus HVAC 105383-01 - ALPHA BAC Controller and Actuator
  • Siemens / Alpha 1FK6042-6AF71-1EG0 + LP 090-M01-10-111-000 - Servo Motor with Planetary Gearbox
  • FANUC A06B-6096-H204 - Dual Axis Alpha Servo Amplifier Module
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • Hyundai Alpha G4EK - Long Block Engine With Belt
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • Nemoto Dual Shot Alpha - Injector Monitor Part Component
  • Siemens / Alpha 1FK7022-5AK74-1SH3 - Servo Motor
  • Stanley / Alpha QMP controller 21A108721 - Controller Unit 115/230VAC 10AMP
  • Generic 24" Concrete Cutting Hydraulic Walk Behind Push Floor Saw - Concrete Cutting Walk Behind Saw
  • Kawasaki Seibi 9010030042 - Alpha Lubricator Type 8S60MC
  • Hyva Alpha FC A5.5-4-170-K6-HC / 70524267 - Dump Body Hydraulic Cylinder
  • Wittenstein Alpha LP 070-MO2-50-111-000 - Planetary Gear Box Machine Shaft Assembly
  • Tokyo Electron (TEL) Excess Temp Box with Harness - Diffusion Furnace Component
  • FANUC A06B-6089-H204 - Alpha Series Servo Amplifier Module
  • Stanley / Alpha QMP controller 21A108721 - Controller Unit 115/230VAC 10AMP
  • Alpha H60638 - 600W Switching Power Supply Unit
  • Olympus Endo Alpha Cart TI-A1 - Medical Equipment Cart with Accessories
  • ALPHA ALPHA6000-3015JB - Frequency Inverter Drive Power Converter
  • ALPHA WIRE 74010-BK002 - Multi-Conductor Cable Wire
  • Fanuc RoboCut α-0iD Series - CNC Wire EDM Machine
  • FANUC A06B-6124-H207 - Alpha iSV Servo Amplifier Module
  • ALPHA WIRE 2172-SV005 - Multi-Conductor Cable Wire
  • FANUC A06B-6079-H101 - Servo Amplifier Module Alpha 12
  • Alpha Wire Apr-19 - High Low Temperature Cable 75 FT
  • ALPHA WIRE 6717-RD001 - Hook Up Wire Stranded 14 AWG 600V mPPE
  • Alpha Technologies CXPS-E3 200A - 400A / 0919006-001 - Power System Rectifier
  • Wittenstein Alpha LP 090-M01-7-111-000 / Schneider - Gear Box i:7 Schneider Electric Servo Motor
  • Christ Alpha 1-2 LD plus - Lyophilizer Freeze Drier
  • Ojeda USA ALPA-55 G2 - Alpha Open Air Merchandiser Grab and Go Display Case
  • Wittenstein Alpha SPK140 MF2-10-051-000 - Bevel Planetary Gearbox Reducer
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • FANUC A06B-6096-H106 - ALPHA SERVO MODULE SVM1-130 Series
  • Alpha & Omega AOD442 - N-Channel MOSFET Reel Surface Mount
  • Wittenstein Alpha SPK 100-MF2-20-141-000 - Right Angle Gear Reducer 20:1 Ratio
  • FANUC A20B-2100-0742 - ALPHA ia Servo Control Board
  • ALPHA WIRE 5470C-SL005 - Multi-Conductor Cable Wire
  • B&L Biotech Alpha II - Endodontic Starter Kit
  • Digital Alpha VME 5/480 - VME SBC Motherboard CPU Board