Aerotech Ndrive series digital servo drives

Aerotech Ndrive series digital servo drives

Overall characteristics of the product

Power range: Peak output current 10A-150A, maximum DC bus 320VDC; Supports two-phase/three-phase AC input or DC input, with CE certification.

Control core: high-performance DSP, current loop, servo loop sampling update rate up to 20kHz; Supports two hardware architectures: PWM power level and linear power level.

Feedback support: encoder, rotary transformer feedback; Optional onboard encoder multiplier reduces external wiring.

IO and functions: digital and analog IO; supports PSO position synchronization output (laser triggered), brake relay, emergency stop ESTOP; Some models can be equipped with an independent power supply to achieve power-off operation; HP/HL can expand Ethernet to interface with third-party IO modules.

Networking capability: All drives are mixed and networked through the FireWire bus, allowing for the free combination of different models to build a multi axis motion system.

Classification and positioning of five sub series

Series amplifier type, power supply type, product positioning

Ndrive HP PWM pulse width modulation 2/3- phase AC input high-performance PWM drive, with the most complete current specifications (10-150A peak), the most comprehensive functions, supporting dual/three-axis PSO, Ethernet expansion, and rotary conversion options, suitable for high-power complex automation equipment

Ndrive HL Linear power amplifier with 2-phase AC input, low noise, zero crossover distortion, ultra-high bandwidth, and pursuit of ultimate performance applications; Output ± 40V/± 80VDC bus voltage

Ndrive CP PWM Pulse Width Modulation 2-Phase AC Input High Cost Performance PWM Driver, Cutting Off Some High Order Options and Retaining Core Motion Control, Suitable for Cost Sensitive Projects

Ndrive CL Linear Amplifier 2-phase AC Input High Cost Performance Linear Amplifier, Cost Sensitive and Requires Linear Drive for Low Noise Scenarios

The Ndrive MP PWM pulse width modulation DC input series has the smallest volume, ultra-thin and compact design, and is used for devices with extremely limited space; Only DC bus power supply

Addendum: HP and HL support dual axis, three-axis PSO, and Ethernet; CP/CL/MP only supports single axis PSO and does not have a native Ethernet interface.

Key hardware and interfaces

1. Universal interface

FireWire (IEEE-1394): communicates with A3200 controllers;

Motor feedback interface Jxxx: connected to encoder/rotary transformer (rotary transformer is an optional component);

ESTOP emergency stop detection input;

Keep Alive auxiliary power supply: optional, maintain logic power supply when the main power supply is disconnected;

Motor power output terminal;

RS-232 debugging port;

LED status indicator light.

2. Expand IO board (- IO/- IOH ordering options)

Optocoupler isolated digital input/output;

Analog input and output;

SSINet Buffer RS-422 Encoder Interface;

Absolute encoder interface, brake relay;

IOH is a high current version, with 1A output per channel.

3. PSO position synchronization output

HP/HL: Supports single axis, dual axis DUALPSO, and three-axis TRIPLEPSO;

CP/CL: Single axis PSO only;

MP requires IO option to enable PSO;

There is also a PSOPTO2/3/4 optocoupler isolation option for PSO output level isolation conversion.

Main electrical specifications and key points

The maximum update rate of the current loop is 20kHz; Servo loop 1-20kHz software selectable bandwidth.

Working temperature: 0~50 ℃. three Encoder input: Supports sine analog encoder and TTL square wave encoder; Onboard encoder multiplier: HP/HL supports x 2048, CP/CL/MP (MXU) supports x 1024.

HP series busbar: 10-320VDC; HL：±40V / ±80VDC； MP：10‑80VDC。

Split resistor option - S built-in split resistor; High power HP50/75/100 supports EXTSHUNT external splitter; The fan and three-phase input are optional configurations for the HP series, but HL does not support them.

Dimensions of each model

Ndrive HP: height 232.4mm, width 99mm;

Ndrive HL: Height 234.3mm, Width 206.9mm;

Ndrive CP: height 198.2mm, width 63.5mm;

Ndrive CL: height 265.2mm, width 103.7mm;

Ndrive MP: Height 141.2mm, width only 41.1mm (thinnest).

The document provides detailed mechanical drawings for each model with IO board, including specifications for openings and mounting holes (M3.5/M4/M5).

Order coding rules

The complete model consists of multiple segments: Nddrive [series] [current specifications] - [control options] - [rotary transformer options] - [power hardware options]

Basic models: Ndrive HP10/HP20/HP30/HL10-40-B/CP10/CL10-40/MP10;

Control options

-IO: Standard IO expansion board; IOH high current IO board;

-DUALPSO/TRIPLEPSO dual/three-axis PSO;

-MXH/MXU encoder doubling;

-ENET Ethernet (HP, HL only);

Rotating Transformer Options: RDP1-10K (Single Channel 10kHz Carrier), RDP2-7.5K (Dual Channel 7.5kHz Carrier), etc;

Power options

-S built-in shunt resistor; EXTSHUNT external shunt;

-3P three-phase AC input; FAN-115/230 cooling fan;

The HL suffix - A/B/C/D represents the AC input voltage level (115VAC, 230VAC, etc.).