Alcatel Lucent OmniSwitch 6450 Stackable Gigabit Ethernet Switch Series

Alcatel Lucent OmniSwitch 6450 Stackable Gigabit Ethernet Switch Series

Product positioning and applicable scenarios

The OmniSwitch 6450 is a fixed configuration stackable switch with 10 Gigabit uplink and 10 Gigabit stacking capabilities, supporting upgrades to metropolitan Ethernet services. The hardware design takes into account flexibility, scalability, and low power consumption, running a mature AOS operating system to achieve high availability, secure protection, easy management, and green energy-saving networks. Applicable deployment scenarios:

Small and medium-sized network access edge

Enterprise branch offices and park working groups

Residential and commercial custody services

Operator network deployment

Product model family

The entire machine is a 1U chassis, divided into four major subcategories:

L series: 100Mbps electrical port models (OS6450-24L/P24L/48L/P48L), default 100Mbps ports, can be upgraded to gigabit speed through authorization; P represents the PoE version.

Ordinary/X/M series: 24 port, 48 port gigabit electrical port models.

X model: SFP+port factory default 10G;

M model: By default, enable metropolitan Ethernet services;

The default SFP+for non-X models is gigabit and requires an OS6450 SW PERF license to enable 10G.

U-fiber series (OS6450-U24 series): 22 SFP optical ports+2 optoelectronic multiplexing combo ports;

S model: Supports IEEE1588v2 PTP precise time protocol (end-to-end transparent clock, only available in non stack mode);

SXM model: Supports both 1588v2 and default enabled metropolitan Ethernet functionality.

Expansion module: Expansion slots are provided at the rear of the chassis, with optional 10G stacking modules, 10G uplink modules, Gigabit SFP, and Gigabit RJ45 expansion cards.

Stacking ability: Up to 8 devices can be stacked in a single group; Maximum stacking ports for the whole machine: 384 FE/GE, 16 10G ports.

PoE capability

The PoE model is compatible with IEEE 802.3af and 802.3at (PoE+) standards and can provide power to IP phones, wireless APs, and surveillance cameras. Supports dynamic PoE power allocation, providing only the actual required power to the powered device, and can configure the priority and maximum power of each port. The budget for 24 port PoE machine is 390W; the budget for 48 port PoE machine is 780W.

power configuration

Non PoE models: support built-in AC/DC backup power supply, with a machine height of 1U;

PoE model: The backup power supply is external, and the whole machine occupies 2U rack space.

Core business benefits

Flexible deployment and investment protection: Rich hardware models+software authorization upgrades, easy installation and operation.

Multi service integration: providing high-performance support for real-time voice, video, and data services.

Reduce Total Cost of Ownership (TCO): Low power consumption, dynamic PoE, reduce operational expenses (OPEX); Hardware integration enables network segmentation and secure isolation without the need for additional hardware.

High availability and on-site upgrade: Software is upgraded on-site, with minimal interruption to business operations.

Edge networks have built-in security capabilities and do not require additional payment.

Automated deployment: Switch automatic configuration, end-to-end VLAN issuance, reducing deployment costs.

Simplify the operation and maintenance of Ethernet OA&M in the operation mall domain.

Management System

Management interfaces: CLI command line, WebView web page management SNMPv1/v2/v3； Support SSHv2 and Telnet; Support USB, TFTP/FTP/SFTP/SCP upload configuration; The configuration file is readable ASCII text and supports offline batch editing. Supports programmable OpenFlow.

Network management platform docking

Enterprise: OmniVista 2500 Network Management System;

Operator: 5620 Service Aware Manager (SAM).

Monitoring and troubleshooting tools

Syslog local/remote logs; Port mirroring, policy mirroring, remote port mirroring;

SFlow v5, RMON statistics; Ping、Traceroute；

DDM optical module digital diagnosis, monitoring optical signals; TDR time-domain reflection detection of copper cable fault breakpoints.

Automatic network capabilities: LLDP/AMAP topology discovery, MVRP dynamic VLAN, DHCP automatic acquisition of switch IP, NTP time synchronization.

High availability and redundancy capability

Virtual chassis stacking: up to 8 devices, primary and backup unit failure switching, redundant stacking links, configuration rollback.

Second layer ring network protection

RRSTP ring network quickly generates trees with convergence less than 100ms;

MSTP、RSTP、PVST；

ITU-T G.8032 Ethernet ring protection ERP, convergence<50ms (metropolitan area characteristics);

LACP link aggregation, static LAG; DHL dual home link protection, sub second level protection, no STP required.

Triple redundancy: VRRP virtual routing redundancy.

Fault protection: UDLD unidirectional link detection; Second layer port loop detection; Broadcast multicast storm suppression; BPDU protection, root protection.

Hardware redundancy: Hot swappable backup power supply; Dual mirror system firmware, dual configuration file backup.

Security features

Implementing NAC network access control based on the Access Guardian framework, supporting BYOD device management (guest network, device registration, terminal status check, authentication dynamic change CoA):

Authentication methods: 802.1X, MAC address authentication, Captive Portal web portal authentication; Supports Radius, LDAP, TACACS+.

Terminal control: HIC host integrity verification, isolation and repair of non compliant devices; UNP user network configuration file, issuing VLAN, ACL, and bandwidth policies to authentication terminals; Guest VLAN, guest VLAN, and private VLAN implement user isolation.

Anti attack protection: Hardware ACL (L1-L4), built-in DoS attack filtering; DHCP Snooping, DHCP IP spoofing protection; Dynamic ARP protection to resist ARP poisoning.

Secure session: SSHv2, PKI public key system.

QoS、 Integrating multimedia services

8 hardware queues per port; Scheduling algorithm SPQ strict priority, WRR weighted polling, DRR deficit polling; Support entrance speed limit and exit shaping; Tri color marking for single/dual rate traffic monitoring; HOL head blocking protection; Auto QoS automatically optimizes traffic management for IP telephony and switches.

Multicast: Line speed multicast forwarding; IGMP Snooping v1/v2/v3、MLD Snooping； IPMVLAN multicast VLAN, reducing the replication pressure on the core network; The stacked environment supports up to 1000 multicast groups.

Airgroup service supports unified experience across wired and wireless Bonjour devices.

Routing Capability (Layer2+, Basic Layer 3)

Layer 2: up to 16000 MAC addresses; 4000 VLANs; 2000 ACLs; Support 9216 byte jumbo frames; Forwarding latency is less than 4 μ s.

IPv4/IPv6 static routing RIP v1/v2（IPv4）、RIPng（IPv6）。 Support DHCP relay DHCP Option82。

Metropolitan Ethernet service (default enabled for M models, non M models require OS6450 SW ME authorization)

Certified by MEF CE2.0, targeting Ethernet dedicated line services for telecom operators:

802.1ad Q-in-Q (SVLAN/CVLAN) service, UNI/NNI interface, CVLAN-SVLAN mapping.

Ethernet OAM: 802.1ag fault management, 802.3ah OAM, ITU-T Y.1731; G. 8032 ring network protection.

SAA business agents actively measure network performance; Built in traffic generator for verifying SLA service level; Dying Gas fault alarm report.

Support TR-101 PPPoE intermediate proxy and L2CP tunnel to achieve EPL/EVPL Ethernet dedicated line services.

Hardware Specification Summary

Switching capacity: 128Gbps for 24 port models, 176Gbps for 48 port models; Stacked aggregation bandwidth of 40Gbps.

Environmental parameters: working temperature 0-45 ℃; Storage -40~75 ℃; The humidity is 5-95%.

MTBF provides the average time between failures for various models; PoE model fan speed regulation, noise<40dB (A); No PoE base model, no fan, zero noise.

Compliance: FCC, CE, RoHS; Safety UL/IEC 60950; Supports a large number of IEEE standards, ITU-T recommendations, and IETF RFC protocols.

License and accessory selection

Software License

OS6450 SW PERF: Enable non X model SFP+port 10G;

OS6450 SW ME: Enable metropolitan Ethernet services;

24L-UPGD/48L-UPGD: Upgrade the L series 100Mbps port to Gigabit.

Hardware Option 

Expansion modules: 10G stacking module, 10G uplink module, Gigabit SFP/RJ45 module;

Backup power supply: OS6450-BP series, distinguishing between PoE/non PoE, AC/DC;

SFP/SFP+optical module: multi-mode, single-mode, single fiber bidirectional BX series, covering different transmission distances of 100M, Gigabit and 10M; Stacking cables.