+086-15305925923

K-WANG

Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
新闻动态
newS
   
Brand

ABB BC25-30-10-01 CONTACTOR

From: | Author:Wang | Time :2025-05-26 | 101 visit: | Share:

ABB BC25-30-10-01 CONTACTOR

Product basic information

Model positioning: Belonging to ABB BC series contactors, suitable for on/off control of industrial circuits, commonly used in scenarios such as motor drives and power distribution systems.

Category: Contactor, mainly used for frequent connection and disconnection of load circuits, with arc extinguishing capability.


Key technical parameters

Electrical parameters

Rated voltage:

Control coil voltage (U c): Supports 24V DC~250V DC (please refer to the specific nameplate).

Main circuit voltage: suitable for industrial standard voltage levels such as 480V AC and 600V AC.

Breaking ability:

At 480V AC, the breaking current can reach 18kA (requires 50A MCCB protection);

At 600V AC, the breaking current is 5kA (requires 90A K5 fuse or 70A MCCB).

Contact configuration:

Main contact: usually 3 poles (1L1, 3L2, 5L3 input; 2T1, 4T2, 6T3 outputs).

Auxiliary contacts: may include normally open (NO)/normally closed (NC) contacts (such as 13/14 being NO contacts).


Physical specifications

Dimensions: Width B=54mm, height H=81mm, depth reference for similar models is approximately 100mm.

Installation method: DIN Rail installation, supporting vertical or inclined installation (angle ≤± 30 °).

Terminal type: Main circuit: M4 screw terminal, supporting wire cross-sectional area of 1.5-6mm, torque requirement of 1.7N · m.

Control circuit: M3.5 screw terminal, supporting wire cross-sectional area of 0.75-2.5mm, torque requirement of 1N · m.

Function and application scenarios

Core functions

Motor control: used for the start stop and forward/reverse control of industrial motors, and the adapted power range needs to be calculated in conjunction with the motor current (refer to the breaking capacity parameters).

Load protection: Cooperate with fuses or circuit breakers (such as MCCBs) to achieve overload and short circuit protection.

Signal feedback: Feedback the status of the contactor (such as operation or malfunction) to the control system through auxiliary contacts (NO/NC).


Typical applications

Manufacturing industry: control of conveyor belt motors and start stop of fans in automated production lines.

Energy industry: power on/off control in power switchgear, compatible with photovoltaic inverters or energy storage systems.

Building equipment: motor drive and protection for elevators and air conditioning systems.


Installation and operation points

Installation environment

Temperature range: -20 ° C~+55 ° C. Ensure good ventilation to avoid contact oxidation in high temperature environments.

Protection level: IP20 (preventing solid foreign objects), needs to be installed inside the control cabinet to avoid direct exposure to dust or humid environments.

Wiring specifications

Main circuit: When connecting the motor or load, it is necessary to connect the 1L1/3L2/5L3 input terminals in phase sequence, and connect the 2T1/4T2/6T3 to the load terminal.

Control circuit: The coil terminals (A1/A2) must be strictly matched with voltage levels (such as 24V DC or 230V AC) to avoid reverse connection or overvoltage.

Grounding: The metal casing must be reliably grounded, comply with EMC standards, and reduce electromagnetic interference.

Maintenance suggestions

Regularly check the wear of the contacts and remove any signs of arc erosion.

Test whether the coil resistance meets the nominal value to avoid contactor refusal due to coil aging.

NEW ABB BC25-30-10-01 CONTACTOR BC25301001 - SB Industrial Supply, Inc.

  • Pro-face / Xycom 4612T / 4612-102031015 - Flat Panel Industrial PC
  • Xycom XVME-203 / 70203-001 - VME Board
  • Xycom XVME-957 / 70957-001 - Mass Storage Sub-System
  • Xycom 9403t - Power Board
  • Xycom 3515-KPM - Operator Interface
  • Xycom XVME-560 / 70560-001 - AIN Analog Input Module
  • Xycom / Adept XVME-201 / 70201-001 - VME Digital Counter I/O Module Board Card
  • Xycom 9460 - Touch Screen
  • Xycom Automation 9000-FFP-HU - Module
  • Xycom XVME-201 - Digital I/O Controller Card
  • Xycom / Pro-face 5015T/R2 - Panel
  • Xycom 103711-001 / 103709 - Circuit Board Card
  • Xycom / Pro-face 5015KPMT - Operator Panel
  • Xycom SXT1811T / 1811-C00000000 - Touch Panel
  • Xycom / Analogic CDA XVME - VME TI DSP SCSI I/O Module Serial RS232 Card Board
  • Xycom 4153/C - Control Interface
  • Xycom / Pro-face 1547 / 1547-00113101 - Industrial Computer
  • Adept 10350-01064 - AWCII 060 Computer/CPU Module Card for MV Controller
  • Xycom / SPX Air Gage 3515 KPM / PM101874B - Operator Interface Panel
  • Xycom / Pro-face 5015T/R2 - Flat Panel Touch Monitor (Not Working)
  • Xycom 3515 - Operator Interface
  • Xycom 9406AC - Industrial Computer
  • Xycom 8100-0272A / 278811XFF - CNC Brown Out Sensor/PROM Card
  • Xycom 3115T / 1200-256-2K-N1 - Operator Touch Panel (For Parts)
  • Xycom 83060CA - Processor Module Board
  • Xycom XVME-540 - VMEbus AIO Module
  • Xycom XVME-955 - Floppy Disc Hard Drive Module
  • Xycom 2005 - 9-inch LCD Upgrade Kit for CRT with Cable Kit
  • Xycom 9000-EXF - Industrial Component
  • Xycom 4860A / 91886-001 - 12" Operator Interface Panel Terminal
  • Quarndon Systems / Xycom XVME-220 - 32pt Programmable Scanner
  • Xycom 98405A-001 - Main Board
  • Xycom / ViewTronix VT1040T - Touch Screen
  • Xycom XVME-566 / 74566-002 - Fast Analog Input VMEbus Module
  • Xycom 9987 / 9987-71338-010 - HMI & Open Interface Panels Display
  • Xycom 4100-AT2 - Single Board Computer PC/ATbus Product Manual
  • Xycom 8450 - LCD monitor with cables for 14inch display
  • Generic MP9W - LCD replacement for 12 inch Monochrome CRT with cables
  • Xycom / Pro-face 5017T - 17" Industrial Touch Monitor (For Parts/Repair)
  • Xycom XVME-675 / XVME-956 - Computer Module (Intel 100Mhz, SCSI, Networking, VGA)
  • Xycom 3100M / 3100-000000000 - Operator Interface
  • Xycom / Pro-face ST401-AG41-24V - Graphic Touchscreen Operator Interface
  • Xycom Automation 1300-000100000 - Node Module
  • Xycom 3615KPM - Operator Interface
  • Xycom 5019 / 5019-A00000000 - Operator Interface Screen Monitor (Not Working)
  • Xycom XVME-688 / 70688-011 / 71688C-001 - VMEbus CPU
  • Xycom XVME-977 / 70977-011 - VME Bus Card with Floppy Drive
  • Xycom 10330-00800 - Digital I/O Board
  • Xycom 9486 - Operator Interface Panel
  • Xycom 9462 - 12.1-inch Operator Interface Panel
  • Xycom XVME-428/1 - VME Bus Intelligent Asynchronous Serial Communication Module
  • Xycom XVME-957 / 70957-001 - VMEbus Mass Storage Sub-System
  • Xycom XVME-660 / 70960-001 - Processor Module Top Board
  • Xycom Automation / Pro-face XT1502T - Operator Interface
  • Xycom / SVG Thermco XVME-203/293 / 70203-001 / 602939-01 - VMEbus Module with Quadrature
  • Xycom 3015T - Operator Interface Panel
  • Xycom XVME-202 - Controller Module Board
  • Xycom XVME-545 - VMEbus Module
  • Xycom 1300-Client-AC - ACP Node
  • Xycom 2000T / 97957-101 - Operator Interface
  • Xycom XVME-682 / 716828-100 / 92373-001 - VMEbus Processor PCB Board
  • Xycom 9450 - PC/AT Computer Operator Interface HMI Screen Monitor Keypad Control
  • Xycom Automation 9987 / 9987-3338-2 - Operator Interface Computer Board
  • Xycom 2060 - 12-inch LCD upgrade monitor with Cable Kit
  • Pro-face / Xycom PFXGP4501TAA - 10.4 inch TFT Color LCD
  • Xycom XVME-401 / 70401-001 - VMEbus Module
  • Xycom / Pro-face 5019T-SER - Operator Interface Screen Monitor
  • Xycom 81625DA - Control Board
  • Xycom 9465 / 01631B001601J - Operator Interface Industrial Computer Terminal
  • Adept / Xycom 10332-00800 - I/O PC Board VME Digital DIO Module
  • Xycom 4810A - 9-inch LCD monitor upgrade with Cable Kit
  • Xycom XVME-540 / 86-16098-001 - AIO VMEbus Module
  • Xycom XVME-212 / 70212-001 - 32 Channel Programmable Scanner VMEbus DIN Module
  • Xycom 510084 - Power Supply Board
  • Xycom XVME-240 / 70240-001 / 2800302 - DIO VMEbus Module Card
  • Xycom 9450-248661601 - HMI Panel
  • Xycom 9450 / 9450-27B131901 / 713332 - HMI Panel Display
  • Xycom 9450 / 4664 - Automation Interface Screen Monitor
  • Xycom XVME-220 - VMEbus 32pt Programmable Scanner DOUT
  • Xycom XVME-979 - CD-ROM/HDD/FDD Interface Card/Module for MV Controller
  • Xycom XVME-505/1 / 70505-001 - VME Analog I/O Module
  • Xycom 4615T - HMI
  • Xycom XVME-675 / 957 / 956 - VME Bus Card Floppy Drive CPU Assembly
  • Xycom 9485 / 9485-27A131701 - Operator Interface Panel
  • Xycom XVME-566 - Analog Input Module
  • Xycom 99142-025 - Circuit Board
  • Xycom 4615kPM - HMI / Operator Panel
  • Xycom Automation QPI-MBP-XA1 - Modbus Plus Communication Module
  • Xycom XVME-085 - Proto VMEbus Prototyping NIKL VME Module
  • Xycom Pro-face 1547 / 1547-00113101 - Industrial Computer
  • Xycom 81987-001-D / 1805 - General Purpose I/O Circuit Board
  • Xycom XVME-505/1 - VMEbus Analog I/O Module
  • Xycom Pro-face GLC150-BG41-DNM-24V - Graphic Logic Controller
  • Xycom Pro-face 3310T / 3310-001101001 - Operator Panel
  • Xycom 99157-001 - Circuit Board
  • Xycom Pro-face 5017T - 17" Industrial Touch Monitor
  • Xycom XVME-202 - VMEbus Module
  • Xycom XVME-103 / 10103-001 / 70401-001 - VMEbus CPU Module
  • Xycom XVME-240 - DIO VMEbus I/O PCB
  • Xycom XVME-977 - VME Bus Card with Floppy Drive
  • Xycom 4860VME - Keypad Operator Interface Panel Terminal Monitor
  • Xycom 8000 KB3 / 97788-001 - Keyboard
  • Xycom 71602C-100 - VME Board
  • Xycom XT1502-BB-RB / PM-102000 - Display Panel
  • Xycom Pro-face 5019T / 5019-A10010000 - Industrial HMI Display
  • Xycom / MESA Electronics 70956-411C / 4I29X - 16 Bit Ethernet PLC Card
  • Xycom 99222-001 - Industrial PC Board
  • Xycom XVME-955 - Storage Module for MV Controller (No HDD)
  • Xycom XVME-110 / 70110-001 - VMEbus Module
  • Xycom Automation 5019T / 5019-A10010000 / 144602-RS - HMI Display
  • Xycom 2000-KB1 / 94687-001 - Keyboard / Keypad
  • Xycom XVME-401 / 70401-001 - VMEbus Module
  • Xycom XVME / CU040103500 / 4200401 - VMEbus Rack Component
  • Xycom XVME-404 / 70404-001 - VME Disc Drive Controller Module
  • Xycom 3410-KP - 10.4" Operator Interface Flat Panel Industrial PC (For Parts)
  • Xycom / Micro Vitec 9457 / 9457-023812001 / 9457-713332 - Operator Interface Panel
  • Xycom XVME-675 / XVME-956 / PM101558 - CPU Module with DISK Module
  • LAM Research / Xycom 810-17033-003 / 70110-003 - 512K SRAM PCB Card
  • Xycom XVME-100 / 70100-001 - ROM PCB Board
  • Xycom Pro-face 5015T - Touch Monitor
  • Xycom Automation 1300-000100000 - Operator Interface
  • Xycom XVME-675 / XVME-956 / 70675-098 - CPU Module with DISK Module
  • Xycom 3015 / 139001-001 - Operator Interface Panel
  • Xycom Automation 143913-001 / 13ZT103-00-010 - TSKAM Board
  • Xycom XVME-956 - Disk Module
  • Xycom 3308-KP - Industrial Workstation
  • Xycom PMXVME-230 / PM-101659 - VMEbus Intelligent Counter Module
  • Xycom 4870 - Operator Interface Panel