Bonfiglioli A-series spiral bevel gear right angle servo reduction motor

Bonfiglioli A-series spiral bevel gear right angle servo reduction motor

Product Overview

The A series is a right angle output spiral bevel gear reducer, paired with a Bangfeili BMD permanent magnet synchronous servo motor to form a servo right angle reducer motor; It can also be adapted to third-party servo motors on the market.

Comparison of different driving schemes

Low backlash reducer+servo motor: high dynamic, compact structure, high precision

Standard reducer+servo motor: high compact, medium high dynamic, high efficiency

Reducer+Induction Motor: Rich output forms and diverse combinations

Compared to precision planetary gearboxes: This solution has good performance and better price advantages, suitable for medium to high precision and high dynamic working conditions.

Core Product Advantages

One stop complete supply: Bangfeili provides a complete set of products including reducers, servo motors, and drive inverters, with unified configuration optimization to achieve optimal cost-effectiveness.

High cost-effectiveness: New design and innovative technology optimize price performance ratio.

Strong mechanical compatibility: The servo input flange is compatible with the vast majority of servo motors on the market.

Reliability improvement: Iterative upgrade design results in higher equipment reliability and longer lifespan.

Adapt to complex working conditions: adapt to cyclic alternating loads and continuous operating conditions; Excellent dynamic performance and flexible expansion of specifications.

Advantages of servo motor itself: permanent magnet synchronous servo motor, small moment of inertia, compact overall structure; The highest protection level can reach IP67, suitable for high-precision dynamic motion control.

target application industries

Covering multiple types of automation industries: material handling, packaging and labeling, food and beverage, woodworking machinery, household paper and textiles; Machine tools, tobacco, glass processing, robots, automated warehousing, ceramic processing, electronic manufacturing assembly.

Product Technical Specifications

Basic parameters of A-series synchronous servo reduction motor

Gearbox specifications: 6 types of specifications, A05、A10、A20、A30、A35、A41

Deceleration levels: Level 2, Level 3

Output torque range: 100-850 Nm

Reduction ratio i: 5.2~400.8

BMD servo motor specifications

The BMD series servo motor has a total of 7 machine bases: BMD65, BMD82, BMD102, BMD118, BMD145, BMD170; The output torque covers approximately 0-45Nm.

A-BMD combination: A05/A10/A20/A30/A35/A41 (2nd/3rd gear reducer) can be matched with all BMD servo motor bases.

The document comes with a torque bar chart, which visually displays the torque capabilities of various servo motors in BMD.

Appearance and interface dimensions

Servo input end (servo flange)

Provide 2D engineering views of A-series servo flanges; Provide the weight of each specification reducer: A05 (6kg)、A10 (10kg)、A20 (14‑15kg)、A30 (19‑31kg)、A35 (19‑44kg)、A41 (43kg)； Complete the table to record the key parameters of the input flange: bolt specifications, stop diameter, positioning dimensions, flange outer diameter, installation hole distribution circle, shaft diameter, key specifications, etc. Distinguish between different servo flange models (S11F40B1, S14F60A2, etc.) corresponding to each machine base of the A series.

Gearbox output interface

Output 2D drawings, output interface size parameter table: C, H, J, J1, J2, K, S, Q and other external installation dimensions.

J1 and J2 sizes are only applicable to A05 models.