K-WANG

+086-15305925923

Service expert in industrial control field！

English 简体中文

NameDescriptionContent

Adequate Inventory, Timely Service

pursuit of excellence

Ship control system

Equipment control system

Power monitoring system

Current position:

Home >> ABB >> ABB DSPC170 SPC 170H processor module

新闻动态

newS

Brand

ABB DSPC170 SPC 170H processor module

The control compartment incorporates the hardware for the control,

monitoring and protection functions of the drive, and the

communication interfaces to the local control panel and to the remote

control devices.

Depending on the control concept of the drive sys tem, the remote control devices include a higher level control system and / or remote operator sta tions.

This section provides a brief functional overview of the main hardware

components of the control system and their interconnection.

3.2.1 Local control panel

The local control panel on the door of the control

compartment serves as the basic user interface for

monitoring, control, operation of the drive, and

setting of parameters.

For further information, see Chapter 8 - Operation

and Chapter 9 - CDP control panel.

3.2.2 AMC circuit board

Overview

The AMC circuit board is the major component of

the control system of the drive and performs general drive, motor control, and closed loop functions. The main internal control devices and the

peripheral input and output interfaces to the customer communicate with the AMC circuit board via

optical fibers.

For information on the devices present in

the control compartment of the drive, see

wiring diagrams.

For 24 V circuits the ATO style blade fuses

rated 3 A, 32 V are used.

—

References

—

3-2 Control compartment

—

3-2

1. IOEC modules with analog and digital inputs

and outputs

2. Power supplies, contactors, auxiliary relays

3. AMC circuit board

4. 24 V power distribution terminals

The circuit board is fitted with a Motorola DSP pro cessor and features two PPCS and eight DDCS

communication channels. The communication

channels are used for high speed data transfer via

the INT circuit boards to the Phase-INT circuit

boards inside the phase modules.

Control tasks

The AMC circuit board has specific control and

closed-loop tasks assigned to it. It processes drive

and status information, performs the speed and

torque control tasks, and monitors the operation

of the drive.

The AMC circuit board continuously monitors all

relevant drive variables (eg, speed, torque, current,

voltage). Pre-programmed protection functions

ensure that these variables remain within certain

limits in order to maintain safe operation of the

drive. These internal functions are not programma ble by the user.

Optionally, the AMC circuit board can monitor sig nals from external equipment.These can be acti vated and adjusted with Parameters.

Other general control, protection and monitoring

tasks regarding the whole drive include control and

monitoring of:

• Main circuit breaker

• Grounding switch

• Door locking system

• Cooling system

Parameters

The control system is configured, customized, and

tuned with a set of application parameters. The

application parameters are organized in functional

groups and have factory-set default values.

The default parameter values are adjusted during

commissioning to the specific application of the

drive in order to activate the specific control, mon itoring and protection functions for the driven pro cess, and to define the signals and data

transferred between drive and external equipment.

The parameters and parameter groups referred to

in the signal allocation tables in this chapter are

valid for drives with software version LDOI6xxx

revision "-" and later versions.

Main circuit breaker

—

The main circuit breaker (MCB) is

an important switching and pro tection device of the drive system.

Therefore it must only be con trolled and monitored by the

drive.

—

References

—

3-3 AMC circuit-board

location

—

3-3

1. AMC circuit board

2. INTerface circuit board

1

2

For further information on the parame ters for signal allocation, signal type

selection, signal inversion, scaling, and fil tering, see signal and parameter table.

For further information, see

• Main circuit breaker engineering

guideline

• Important note on main circuit

breaker

上一篇： ABB DSPC17......

下一篇： ABB DSMC11......

LTI Drives CDF30.002.C0.7 Compact Servo Controller 08685963 DC 24V Industrial Module
LUST LTI Drives CDB32.008.W2.4.BR.PC1 Servo Drive Industrial Motion System
LUST LTI Drives CDB34.003.C2.4.PC1.H15 Servo Motor Driver Industrial Control Unit
LUST LTI Drives CDA32.004.C1.4.H08.B0 Servo Drive Mat. 3084456 Industrial Control
LUST LTI Drives CDE34.005.W2.2 Industrial Servo Drive Motion Control Unit
LUST LTI Drives CDA34.006.W3.0 Servo Drive Software V3.70-04 Industrial Controller
LTI Drives CDB32.004.C2.4.SH Servo Drive Compact Motion Controller
Woodward 9905-373 - Digital Synchronizer And Load Controller
WOODWARD MAGNETIC PICKUPS - Sensor
WOODWARD GCP-30 - Steuertafel for Industrial Regulator Genset Control Package
WOODWARD GOVERNOR 9907-1183 REV A - 505 ENHANCED TURBINE CONTROL
WOODWARD 9907-173 REV B - Module Load Sharing 120 Volt
WOODWARD 9907-014 - 2301A controller
Woodward 9905-029 - SPM-A Synchronizer Module Rev C
WOODWARD 8440-1799 EASYGEN-350 REV B - Genset Controller
WOODWARD 5466-258 REV M - SIMPLEX DISCRETE I/O MODULE
Woodward 8440-1884 C - Controller Easygen 2500-5
Woodward 8441-1153 - Monitoring Unit 250VAC
WOODWARD 8406-120 REV G - EGCP-2 DIGITAL CONTROL
Woodward 8273-584 - Atlas-ii Digital Control
Woodward 8272-582 - APM Motor Control 8272582
Woodward 9905-377 Rev. A - 2301A Load Sharing and Speed Control
WOODWARD 8272-517 - Pm Motor Control
WOODWARD 9905-797 REV.B - DIGITAL SYNCHRONIZER AND LOAD CONTROL DSLC-D
WOODWARD 8272-582 - APM MOTOR CONTROL
Woodward Seg FP2-8-24 - Emergency Power Telecommunications Module NP2
WOODWARD 2001-12E2U1B1S1A - Fuel Shut Off Valve Stop Solenoid Valve 2000-4505
Woodward 8440-1884 K - Genset Controller Easygen-2500-5
Woodward 9905-760 - Linknet Termination Module
Woodward 8404-009 - Proact Digital Plus Front Panel Rev. H
Woodward 8271-651 - Digital Speed Reference
Woodward 3077-474C - 8605895 5501-031 D Circuit Module
WOODWARD 5466-257 REV.-C - NETCON 5000 MODEL REMOTE TRANSCEIVER I/O MODULE
Woodward 8273-101 Rev: A - 2301D Digital Load Sharing and Speed Control
WOODWARD 8272-799 - 2301A SPEED CONTROL WITH REMOTE REFERENCE REV:C
Woodward 8272-517 - PM Motor Control
Woodward 8290-048 8290048 Rev. F - Generator Load Sensor
woodward 8273-1012 rev c - 2301e Load Sharing and Speed Control
WOODWARD 9905-797 - DIGITAL SYNCHRONIZER AND LOAD CONTROL FOR 3 PHASE GENERATORS
WOODWARD 8280-3014 - 723 PLUS DIGITAL CONTROL REV NEW
WOODWARD 8440-1884 REV G - GENSET CONTROLLER EASYGEN-2500-5/P1
Woodward 8272-683 K - Digital Reference
WOODWARD 9907-014 - SPEED CONTROL 2301A REV H
Woodward Type UG-8 P/N 037260 - Governor R.P.M 1075-1650 Motor KM58-20
WOODWARD 9905-970 - LINKNET 6 CHANNEL 100 OHM RTD Rev:J
Woodward 9907-1183 Rev C - Steam Turbine Digital SCREEN 505E Turbine Control
Woodward 8440-1614 - GCP-30 Genset Control Package, Rev: F, Type 1, E231544
Woodward DC11006-304-024 - ACTUOTOR DYNA ACTUATOR - BARBER-COLMAN
Woodward 9905-971 - LINKNET 6 CHANNEL 100 OHM RTD Rev:K
Woodward DYNK-10249 - Actuator Controller Kit - DYNA 2000
Woodward LR21035 - MFR1 MULTI FUNCTION RELAY REV F
Woodward 8440-1831 - EASYGEN 3200-5 P/N: REV. G Gererator Controller
Woodward 8272-516 - PM MOTOR CONTROL REV J
Woodward 8440-2080 - EASYGEN 2000 genset controller EASYGEN-2300-5/P1
Woodward 505DE - Digital Control System
Woodward 701 - Digital Speed Control 18-40 VDC 4-20 MA
Woodward 8440-1799 - EASYGEN-350 REV B
Woodward 8272-582 - Apm Motor Control 100-220v AC/DC
Woodward 5501-031 D - 3077-474C 8605895 Circuit Module
Woodward XD1-T - XD1T55SAT TRANSFORMER DIFFERENTIAL PROTECTION RELAY
Woodward 8272-517 - PM Motor Control 220vac
Woodward 8934-658 - Repair Kit UG8D Governor
Woodward 5437 18 - module netcon derivative analog rev.A
Woodward 8272-171 A - Pm Motor Control
Woodward MRN3-1/2 - SEG mains uncoupling relay MRN314D mains decoupling relay
Woodward 9905-373 - Digital Synchronizer and Load Control 18-40 VDC Rev P
Woodward 5431-640 C - Dual Dynamics 1000 Series Speed Control Module
Woodward 5501-031 D - 3077-474C 8605895 Circuit Module
Woodward 9907-247 - 828 DIGITAL CONTROL
Woodward 8440-1855-G - EASYGEN-2200-5 /P1 12/24VDC GENSET CONTROLLER
Woodward NC3-2-8 (NO) - GENERATOR CONTROLLER
Woodward 8271-467 K - 2301 LOAD SHARING AND SPEED CONTROL PART NO:
Woodward 8440-2177 A - SPM-D2-10 Digital Synchronising Controller
Woodward LXMG1614E-14-11 - CCFL and UV Lamps Inverter Module
Woodward 8270-990 - signal converter
Woodward 9905-068 - LOW VOLTAGE 2301A LOAD SHARING & SPEED CONTOL P/N:
Woodward 8901-051 - BOOSTER SERVOMOTOR, SINGLE CYLINDER, 2:1
Woodward 8444-1024 D - MWS4-55M CONTROL MODULE UNIT
Woodward 5448-914 - GCP-20 Genset Control GCP-20 REV D P/n:
Danfoss BHA-1 018-1942 - Hydraulic Actuator
Woodward 9905-001 L - SPM-A SYNCHRONIZER
Woodward 5464-850 - Module
Woodward 5501-371 - Micronet Simplex Mpu Aio Rev C
Woodward 8272-132 B - POWER SENSOR
Woodward 9907-028 - SPM-A Synchronizer
Woodward SA-3678-AM-2 - Overspeed Electric Governor, Model ESSE2-AM
Woodward E8250-502 - GOVERNOR ACTUATOR
Woodward 8440-1884 J - Controller EASYGEN-2500-5
Woodward 5441-693 - DIGITAL I/O MODULE -MISSING PART
Woodward SA-4450 - Speed Controller APECS 3100 For Magnetic Pickup
Woodward 9903-466 - 701 DIGITAL SPEED CONTROL REV G
Woodward 1765-843 - Governor Speed Adjusting Motor P/N Type: SMM40 220V AC 50/60Hz
Woodward 9905-760 - Linknet Termination Module
Woodward 9907-247 - 828 DIGITAL CONTROL UNIT REV K
Woodward 5484-721 - motor
Woodward 8440-1734 - MFR-2 Rev.A Multi Function Relay MFR-2
Woodward CSC3SUWA - Controller
Woodward 8440-1667 - REV B SPM-D1010B/XN
Woodward 8406-120 - egcp-2 digital control
Woodward DPG-2201-002 - DIGITAL CONTROLLER REV D
Woodward 8272-516 - Pm Engine Control Rev J
Woodward 8440-1831 - EASYGEN 3200-5 P/N: REV. K - WITHOUT ACCESSORIES
Woodward 8273-101 - LOAD SHARING & SPEED CONTROL
Woodward 8440-1855-G - EASYGEN-2200-5 /P1 12/24VDC GENSET CONTROLLER
Woodward 9907-247 - 828 DIGITAL CONTROL UNIT REV K
Woodward LR21035 - MFR1 MULTI FUNCTION RELAY REV J
Woodward 8404-009 - PROACT DIGITAL PLUS FRONT PANEL REV J
Woodward 9905-204 - Rev N SPM-A synchronizer
Woodward 8521-367 - UG-8 P/N r R.P.M 750-1280 Governor / UG8
Woodward 9907-175 - Load Sharing Module Rev. B
Woodward 5464-645 - DRIVER MODULE REV A 2C ACT DRIVE
Woodward 8404-009 - PROACT DIGITAL PLUS FRONT PANEL REV J
Woodward 9907-175 - Load Sharing Module Rev. B
Woodward 8406-102 - Rev A EGCP-2 Digital Control Engine Generator 8406102
Woodward EASYGEN-2500-5 - Controller Genset
Woodward 8440-2082 - Controller
Woodward 8272-516 - PM MOTOR CONTROL REV J
Woodward 9905-373 - Digital Synchronizer and Load Control 18-40 VDC Rev P
Woodward 5501-429 - Actuator Controller 25mA 2 Channel , (UPP)
Woodward 8440-1869 - SPM-D10 Synchronizing System Control-SPM-D10B/PSY4-F-D
Woodward 9907-175 - Load Sharing Module Rev. A
Woodward 8200-224 - Servo Position Controller
Woodward 9906-619 - 723 PLUS DIGITAL CONTROL ( 8280-604 )
Woodward 8440-1519 - EASYGEN PART NO: REV: 4
Woodward 5501-371 - REV C MODULE- MICRONET SIMPLEX MPU & AIO FTM
Woodward EASYGEN-3200-5/P1 - Generator Controller Module Rev F
Woodward 8440-1884K - GENERATOR CONTROLLER EASYGEN-2500-5 REV,K
Woodward 5466-353 - REV C NETCON MAIN CHASSIS TRANSCEIVER