ABB EL3020 Gas Analyzer
The matrix below indicates all available product documentation and its corresponding order numbers on its left columnsas well as all existing DC Drive systems on its top rows. System descriptions, Technical data and Operating instructions
(as far as they are available for the corresponding drive) are the basic documents and will be delivered together with each
drive. All other documentation has to be ordered separately.
DC drive systems System Drive Standard Drive 5HEXLOG
Cubicle Module Cubicle Module
Product documentation
System description Language Volume
3ADW000049 EN, DE II A x x
3ADW000062 EN, DE II B x
3ADW000066 EN, DE,FR II D x x
3ADW000069 EN, DE II E x
3ADW000072 EN, DE II F x x
3ADW000121 ➀ EN II F1 x x
3ADW000095 (Manual) ➁ EN,DE,FR,IT,SP II K x
Technical Data Language Volume
3ADW000054 EN, DE,FR III x x x x x x x x
Operating Instructions Language Volume
3ADW000055 EN,DE,FR,SP IV A x x x x x x
3ADW000064 EN, DE IV C x x
3ADW000080 EN, DE IV F x x x x
3ADW000091 (Installation) EN, DE IV F1 x x x x x
Software description Language Volume
3ADW000056 EN V A1 x x x
3ADW000078 EN V D1 x x x
3ADW000076 EN V F x x x x
3ADW000050 EN -x x
3ADW000031 (Diagr.) EN -x x
3ADW000053 EN V C x x
3ADW000052 (Diagr.) EN V C x x
Tools Language Volume
3AFE61178775 CMT/DCS500 EN - xx xxxx
EN 5926915-1 GAD EN - xx xxxx
3ADW000048 (Application blocks) EN V A2 x x x x x x
3AFY61041486 DDCTool EN - x x x x xx xxxx
3AFY61296123 Drive Window EN - xxxx
6HUYLFH,QVWUXFWLRQV Language Volume
3ADW000093 EN VI A x x x x x x x x x x x x
3ADW000131 EN VI K x
)LHOGEXV Language Volume
3ADW000086 EN - x xx
3ADW000097 EN - xxxx
Others Language Volume
3ADW000115 12-Pulse operation EN II F2 x x
3ADW000092 Rebuild manual EN II H x x x x x x x x x x x x
3ADW000128 Paralleling DCS Conv. EN II H1 x x x x

How to use this manual The purpose of this manual is to provide detailed information about
the different types of 12 – pulse converter configurations, their op eration principles, their various applications,
the required hard ware/software/parameters and the start up of a 12 – pulse configu ration consisting of DCS 600 series thyristor power converters.
Note: All details given in this manual are valid for DCS 600
series converters even if not explicitly mentioned!
Contents of this manual Chapter 1 – Introduction
This chapter describes how to use this manual and the available
associated publications.
Chapter 2 – Twelve–Pulse Technology
This chapter defines 12 – pulse technology and describes the ad vantages and types of 12 – pulse configurations as well as the
T-reactors and the power transformers to be used. Also information
about earth fault monitoring, control, trip emergency operation is
given.
Chapter 3 – Twelve–Pulse Parallel
Configurations with DCS 600
This chapter describes the 12 – pulse hardware configurations and
control structure using DC thyristor power converters of the
DCS 600 series in parallel connection. It also informs about the
software configuration, the 12 – pulse communication via SDCS CON-2 channel V260, the 12 – pulse configuration (activation of
12 – pulse mode) as well as monitoring and fault signals. The func tional description gives details concerning switch-on/-off logic, dy namic response, current controller, measuring the DC voltage and
bridge reversal.
Chapter 4 – Twelve–Pulse Serial / Sequential
Configurations with DCS 600
This chapter describes the 12 – pulse hardware configurations and
control structures using DC thyristor power converters of the
DCS 600 series in serial/sequential connection. The chapter also
informs about the software configuration, the 12 – pulse communi cation via SDCS-CON-2 channel V260, the 12 – pulse configuration
(activation of 12 – pulse mode) as well as monitoring and fault sig nals. The functional description gives details concerning
switch-on/-off logic, dynamic response, bridge ratings, bridge rever sal, current controller and DC voltage measurement.