Honeywell Expert Series-C I/O Specification



Honeywell Expert Series-C I/O Specification

Product Introduction

Overview

This document provides expertise ®  Technical information on the configuration of Series C I/O and C300 controllers, which will be released starting from the Expert R300 version.

Range

The Series C I/O products covered include various types such as digital inputs, digital outputs, analog inputs, analog outputs, low-level multiplexers, pulse inputs, and general-purpose input/output.

definition

IOTA (Input Output Termination Assembly): A component that accommodates IOM and on-site wiring connections.

IOM (Input Output Module): A device that contains most of the electronic devices required to perform specific I/O functions and can be plugged into IOTA.

Product Features

Innovative design: Supports enhanced thermal management and significantly reduces size compared to similar products.

Integrated design: I/O modules and field terminals are combined in the same area, without the need for separate chassis to accommodate electronic components.

Detachable terminals: Two levels of "detachable" terminals, convenient for factory installation and maintenance.

Power supply: Provide on-site power through IOTA, without the need for additional power or manual wiring.

Redundancy support: Implement redundancy directly on IOTA without the need for external wiring or redundant control devices.

Installation design: Vertical installation facilitates wiring; The "information circle" provides quick visual prompts; The "tilted" design effectively manages the heat inside the cabinet.

Circuit protection: The input and output circuits have short-circuit protection, eliminating the need for circuit fuses and reducing installation and maintenance costs.

Series C I/O selection and size

Selection advantages

In almost all configurations, the C300 controller and Series C I/O provide practical and maintainable process equipment connections in a smaller space, helping to reduce overall installation costs.

MODULE SIZE

Simulation modules typically have 16 points, with 6-inch (152mm) IOTA used for non redundant applications and 12 inch (304mm) IOTA used for redundant applications.

The discrete module has 32 points, with 9-inch (228mm) IOTA used for non redundant applications and 12 inch (304mm) IOTA used for redundant applications.

I/O module functionality

Including various functional modules such as high-level analog input/with HART input, high-level analog input/without HART, analog output/with HART output, etc., each module has different functions and characteristics.

Specific module specifications

Analog Input Module

CC-PAIH01/02 (with HART): Supports high-level current or voltage input, 16 channels, multiple input ranges, and features extensive self diagnosis and optional redundancy.

CC-PAIH51 (with HART): accepts high-level current input from transmitters and sensing devices, 16 channels, supports only 4-20mA input.

CC-PAIX01/02 (without HART): Similar in function to CC-PAIH01/02, but does not support HART.

CC-PAIN01 (without HART): accepts high-level current input from sensing devices, with 16 channels.

Low level analog (temperature) input module

CC-PAIM01 (LLMUX): Supports up to 64 channels of temperature input, uses Honeywell PMIO LLMUX FTA, supports thermocouple (TC) and thermistor (RTD) inputs.

CC-PAIL51: Supports up to 16 channels of temperature input, each channel can be configured as a thermocouple or thermistor input, without the need for an external Process Manager FTA.

Pulse input module (CC-PPIX01)

Provide the ability to monitor various pulse input field values for the Expert C300 controller, support the "quick cut-off" function, suitable for metering and trade handover applications, with 8 input channels and 2 output channels.

Analog output module

CC-PAOH01 (with HART): Provides high-level constant current to actuators and recording/indicating devices, with 16 output channels and multiple features.

CC-PAOH51 (with HART): Similar in function to CC-PAOH01, supports HART status and configuration.

CC-PAOX01 (without HART): Provides standard 4-20mA DC output with 16 channels.

CC-PAON01 (without HART): Similar in function to CC-PAOX01.

Digital Input Module

CC-PDIL01 (24VDC): accepts 24VDC signals as discrete inputs, with 32 channels and multiple features.

CC-PDIL51 (24VDC): Similar in function to CC-PDIL01, without open circuit detection.

CC-PBIS01 (Event Sequence): accepts 24VDC discrete signals, can be time stamped to support event sequences with 1ms resolution, and has 32 channels.

CC-PDIH01 (high voltage): accepts signals such as 120VAC/125VDC, 220VAC as discrete inputs, with 32 channels.

Digital Output Module

CC-PDOB01 (Bus based 24VDC): Provides reliable 24V digital output signals, 32 channels, and multiple features.

Relay IOTA (using CC-PDOB01 IOM): Provides dry contacts for isolated low voltage/low current or high voltage/high current discrete output applications, with 32 output channels.

CC-PDOD51 (drain type 24VDC): switchable reliable 24V digital output signal, 32 channels.

Universal Input/Output Module

CC-PUIO01: Interface with field devices for analog input, analog output, digital input, and digital output, with 32 channels, each channel can be configured for multiple types.

CC-PUIO31: Similar in functionality to CC-PUIO01, it supports more features such as event sequences.

Functional matrix

Provides a table to assist in selecting I/O modules and IOTA with similar functional characteristics, including AI, AO, DI, DO function matrices, to facilitate users in selecting suitable modules and IOTA based on their needs.