Greenspring P2-Video General Purpose CRT and LCD Video Graphics Controller

Greenspring P2 Video Universal CRT and LCD Video Graphics Controller

Product Overview

Product Name: Greenspring P2 Video, is a universal CRT and LCD video graphics controller in the form of a PC/MIP mezzanine card, provided by Artisan Technology Group. It is a second-hand device but in excellent condition, available in stock and supports urgent service.

Core positioning: To provide high-quality and high-performance graphics adaptation solutions for key industrial, commercial, and military systems, which can extend the service life of the system.

Core hardware and performance characteristics

Core control chip: equipped with Silicon Motion Lynx EM4 PCI interface graphics controller, supporting bus master control function (the carrier slot needs to have this capability when in use).

Graphics Memory: Onboard 4 Mbytes high-performance SGRAM with a bit width of 128 bits, capable of processing high-resolution graphics displays.

Display performance: Supports multiple SVGA/CRT displays in a single screen display configuration, with a maximum resolution of 1024 x 768 @ 75 Hz 24 bpp, and also supports multiple standard resolutions (see table below for details).

Hardware acceleration: equipped with BitBLT engine, MPEG-1/MPEG-2 support, 2D graphics acceleration, and dual buffering video function, improving graphics processing efficiency.

Core crystal oscillator: The frequency of the onboard oscillator is 14.31818 MHz.

Standard CRT supports resolution details

Resolution, color depth, refresh rate

640 x 480 8/16/24bpp 60/75/85 Hz

800 x 600 8/16/24bpp 60/75/85 Hz

1024 x 768 16/24bpp 60/75 Hz

Physical and Electrical Specifications

Appearance and weight: The specifications are PC/MIP single width Type II 10H, with dimensions of 47.0 mm x 99.0 mm and a weight of 0.04 kg (0.085 lb.).

Interface configuration: Only equipped with front panel female high-density DB15 CRT interface, no flexible I/O interface.

Interface standards: Compatible with PC/MIP draft specification version 0.9, PCI specification version 2.1, and also compliant with ANSI/VITA-29 specifications.

Power requirements:+3.3 VDC maximum 150 mA,+5 VDC maximum 10 mA, low power consumption.

environmental parameters

Working temperature: 0 to 70 ° C, working humidity: 5 to 95%, no condensation;

Storage temperature: -40 to+85 ° C, suitable for complex industrial environments.

Compatibility and adaptability

Product compliance: PC99 and ACPI compatible, Type II module with front panel I/O connector porch, can be inserted into any Type II module slot.

Carrier slot adaptation: The designated slot for the corresponding Carrier carrier needs to be selected according to the bus master control requirements (the bus master control slot is in bold). The specific adaptation is shown in the table below:

Carrier Carrier Slot Adaptation Table

Carrier model type, adapter slot, remarks

MC-101 Short PCI Slot Yes-

MC-303 3U Compact PCI 4,5 -

MC-606 6U Compact PCI 4,5,6,7 -

MC-607 6U Compact PCI 4,5,6,7 -

MC-804 long PCI slots 4 ', 5', 6 ', 7' 5/6/7 require additional height to accommodate Type II modules

Ordering and Supporting Resources

Basic ordering model: P2-VIDEO, to support 1024x768 PC MIP modules, including front panel baffle B-004.

Engineering kit: EK-P-VIDEO, including hardware user manual, bill of materials, assembly drawing, and floppy disk with Windows NT 4.0 driver/control panel mini program.

Data acquisition: The Silicon Motion Lynx EM710 user manual can be applied for as needed, and the official website can provide a full range of documents including quotations, drivers, technical specifications, etc.

Related products: PMC-VIDEOPLUS (supports 1280x1024 SVGA/CRT display PMC card), B-004 (Type II 10H single width module front panel baffle compatible with DB9/HD15 interface).

Driver support: Provides a full range of Windows device drivers to meet the adaptation needs of mainstream systems.