+086-15305925923

K-WANG

Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
Home >> ABB >> ABB IMFEC11/12 Analog Input Module
新闻动态
newS
   
Brand

ABB IMFEC11/12 Analog Input Module

From: | Author:Wang | Time :2025-05-23 | 125 visit: | Share:
ABB IMFEC11/12 Analog Input Module
OVERVIEW
The IMFEC12 High Level Analog Input (FEC) module inputs 15 channels of analog signals only to the multifunction processor(MFP) or multifunction controller (MFC) module.
The IMFEC11 High Level Analog Input (FEC) module inputs 15 channels of analog or frequency shift keyed (FSK) digital signals to the MFP or MFC module. The IMFEC11 module performs all the functions of the IMFEC12 module and also provides communication with the Bailey-Fischer & Porter line of FSK digital smart transmitters and other smart devices in afield bus or point to point configuration


INTENDED USER

Installation and application personnel should have a solid background in electronic instrumentation and process control.
They should be familiar with proper grounding and safety procedures for electronic instrumentation. Operators should have a knowledge of the process and should read and understand this instruction before placing the module in operation.


HARDWARE DESCRIPTION

The FEC module is an intelligent module, with on-board micro processor, memory, analog-to-digital converter and communi cation circuitry.
The module is a single printed circuit board that occupies one slot in a module mounting unit (MMU).
Two captive latches on the module faceplate secure it to the module mounting unit.
The module has three card edge connectors for external signals(transmitter inputs and communication), system communica tion (I/O expander bus) and power.
The module receives input through a cable connection to a termination unit (TU) or termi
nation module (TM). Wiring from the field devices connect to terminal blocks on the termination unit or termination module.
The IMFEC11 circuit board has 18 jumpers;three jumpers that allow selecting the mode of operation and communication(J2, J3 and J4) and 15 jumpers that select voltage/current input (J6 through J20). A dipswitch setting (S1) holds the I/O expander bus address of the module


HARDWARE APPLICATION

The FEC module interfaces analog and digital signals from field devices to the MFP or MFC module. The IMFEC11 module can interface Bailey-Fischer & Porter FSK smart transmitters and other smart devices.
The IMFEC12 is for use with conventional transmitters (BC, EQ and PT) and standard analog inputs.
The IMFEC11 module can operate in one of two modes: FSK field bus mode or FSK analog point-to-point mode. In the FSK field bus mode, a single two-wire input (bus) links a maximum of 15 FSK smart transmitters.
All inputs (process data and module to transmitter communication) are in the frequency
shift keyed format and share the field bus.
Refer to the NTFB01 Field Bus Termination Unit instruction for specific limitations on field bus communications.
All field devices must be Bailey-Fischer & Porter when using this mode In the FSK analog point-to-point mode, the IMFEC11 module can interface up to 15 discrete analog process inputs from FSK
smart devices and communicate (digitally) with those devices.
Additionally, the IMFEC11 module can interface a mixture of conventional transmitters and other external analog inputs while operating in this mode.
These devices can input only process data to the FEC module; they cannot communicate to the
module. In point-to-point operation, each device is individually wired to the analog input termination unit or module.


FEATURES

The design of the FEC module, as with all INFI 90 OPEN modules, allows for flexibility in creating a process managementsystem.
The module supports Bailey-Fischer & Porter FSK digital smart transmitters and other smart devices, conventional transmitters and standard voltage or current inputs.
The FSK digital capability (IMFEC11) eliminates conversion errors and increases process control accuracy.
Access is always available to the real time process status. In the field bus mode, all information (including the process variable) is trans mitted digitally between the FEC module and the field devices.
The FEC module stores process data, control commands and transmitter configuration data in memory.
It works to restore communication with a transmitter if a communication failure occurs.
Upon restoring communication with a failed transmit ter, the FEC module checks the transmitter configuration before the control module (MFP/MFC) resumes updating the process control


INTRODUCTION

This section explains the operation of the IMFEC1 Analog Input Module (FEC). The module does two major tasks.
It pro vides an interface by which the controlling module (multifunc tion processor or multifunction controller module (MFP/MFC))can input analog process data from external devices or smart
transmitters. It also serves as a communication link between the INFI 90 OPEN control system and field devices.
The IMFEC12 module accepts inputs from conventional trans mitters (BC, EQ and PT) and standard analog inputs of 4 to 20 milliamps, 1 to 5 VDC, 0 to 1 VDC, 0 to 5 VDC, 0 to 10 VDC and -10 to +10 VDC. The IMFEC11 has all the functionality of the IMFEC12 module but also provides FSK communications for interface to Bailey-Fischer & Porter smart transmitters and other smart devices.


GENERAL OPERATION

Upon receiving initialization from the controlling module (MFP/MFC), the FEC module stores that information in memory and checks the configuration of each input channel.
If all input channels check good, operation begins. If the FEC module detects a configuration error, that error appears in the module status report.
Under normal operation, the controlling module sends trans mitter commands and requests process input data and status information from the FEC module.
The FEC module continu ously reads each input channel, does the necessary conver sions and stores the data in memory.
When the controlling module makes a request for data, the FEC module sends it the most current information that it has in memory.
If a communication failure with one of the transmitters occurs,the FEC module works to restore communication while con tinuing normal operation.
It checks the transmitter configura tion upon restoring transmitter communication and normal process control continues.

ABB SPFEC12 Analog Input Module


  • Kollmorgen PA7500 - Servo Drive
  • Kollmorgen AKM41C-CCCNR-00 - Servo Motor
  • Kollmorgen PJT55-A1 - Motor
  • Kollmorgen PRD-PB805EDD-00 - Servo Drive
  • Kollmorgen SC1R06260 - Servo Drive
  • Kollmorgen QT-3832-C - Direct Drive Motor
  • Kollmorgen CR10550 - Servo Drive
  • Kollmorgen AKM53K-ANCNR-00 - Servo Motor
  • Kollmorgen PE205560 - Servo Drive
  • Kollmorgen M.1300.1286 - Sercos Bracket
  • Kollmorgen S30301-NA - Servo Drive
  • Kollmorgen 12311-000-3/5-01-2 - Circuit Board
  • Kollmorgen LE06565 - Servo Drive
  • Kollmorgen PRD-P303250Z-35/CP303250 - Servo Drive
  • Kollmorgen ST1/80-310 - Servo Amplifier
  • Kollmorgen NE23-30-063 - Gearhead with Step Motor
  • Kollmorgen F60WKS-MB - Board
  • Kollmorgen L-1147/3FP - Motor
  • Kollmorgen 63020-01A - Laser Way Module
  • Kollmorgen SR6-6SMx7 - Motor Cable
  • Kollmorgen LPS PA-LM - Power Supply
  • Kollmorgen BDS4 Series - Manual
  • Kollmorgen SCS-M2A/R-4/5-06 - Connector
  • Kollmorgen M.3000.0147 - Cable
  • Kollmorgen PRDRB0571X2Z-00 - Servo Drive
  • Kollmorgen SM-56S-3.000 - Servo Motor
  • Kollmorgen BDS4P-203H-9205204A7 - Drive
  • Kollmorgen M.1302.8250 - Programming Cable
  • Kollmorgen M.3000.0743 - RS232 Cable
  • Kollmorgen 6SM27LL-4500 - Servo Motor
  • Kollmorgen QT-0714E - DC electric Motor
  • Kollmorgen VF-DA0411N-06 - Feedback Cable
  • Kollmorgen PRD-0019030K-06 - Board
  • Kollmorgen S30361-NA - Servo Drive
  • Kollmorgen sr406 - Cooling Unit
  • Kollmorgen DBL4N00750-B3M-00K-S40 - Servo Motor
  • Kollmorgen VF-DA0411N-09 - Feedback Cable
  • Kollmorgen CR03250 - Servo Drive
  • Kollmorgen Microscope eye piece - Microscope Eyepiece
  • Kollmorgen 65WKS-M310/22-PB - Servo Drive
  • Kollmorgen H-232-G-0712 - Servo Motor
  • Kollmorgen LR0665 - Servo Drive
  • Kollmorgen L-1163/FP - Motor
  • Kollmorgen SCFA-M4A/R-4/5-050 - Cable
  • Kollmorgen s30601-na - Servo Drive
  • Kollmorgen S60600 - Servo Drive
  • Kollmorgen BDS5V-206-00010-202B-2-020 - Servo Drive
  • Kollmorgen AKD-P02407-NBEC-0000 - Servo drive
  • Kollmorgen CP-SS-GAHBE-09 - Connector
  • Kollmorgen VFS5-285-30120-2604H-029 - Servo Drive
  • Kollmorgen CE03260 - Servo Amplifier
  • Kollmorgen AKM22E-ANSNR-02 - Motor
  • Kollmorgen PRD-0054248z-00 - I/O Board
  • Kollmorgen AKD-P00606-NBEC-0000 - Servo Drive
  • Kollmorgen AKM22E-ANB2R-00 - Servo Motor
  • Kollmorgen PSR4/5A-112 - Power Supply
  • Kollmorgen E33NLHP-LNW-NS-00 - Stepper Motor
  • Kollmorgen CP-SS-G1HE-10 - Connector
  • Kollmorgen DBL5N02200-0R2-000-S40 - Servo Motor
  • Kollmorgen EM-11 - DIR Limiter Module Board
  • Kollmorgen PRD-KD30030z-50 - Servo Drive
  • Kollmorgen Digifas 7112 - Servo Driver
  • Kollmorgen M.1016.2717 - Cable
  • Kollmorgen SERVOSTAR 346 - Servo Drive
  • Kollmorgen 6SM27M-4000 - Motor
  • Kollmorgen S30601-NA - Servo Drive
  • Kollmorgen PRD-MZ40ASIz-62 - Servo Drive
  • Kollmorgen SBD2-06-2100-2042A40/120-06 - Servo Drive Board
  • Kollmorgen S7240F-NAF2NA-NA - Drive Controller
  • Kollmorgen Prd-0048100A-00 - Board
  • Kollmorgen AKM41E-EKCNR-00 - Servo Motor
  • Kollmorgen PRD-0W13000F-11 - Circuit Board
  • Kollmorgen BDS4A-030H204C2 - Drive
  • Kollmorgen S403A-SE - Servo Drive
  • Kollmorgen S30101-NA-024 - Servo Drive
  • Kollmorgen CR06200-2G405A - Servo Drive
  • Kollmorgen AKD-P01206-NBAN-0000 - Servo Drive
  • Kollmorgen S20330-VTS - Servo Drive
  • Kollmorgen AKM21G-ENMN2-00 - AC Servo Motor
  • Kollmorgen L-1147/1FP - Motor
  • Kollmorgen akm42c-cccnr-01 - Actuator
  • Kollmorgen AKM22E-ENBNLB00 - Servo Motor
  • Kollmorgen SAM-DA-400-07N-P4N-E - Motor
  • Kollmorgen CP320260 - Servo Drive
  • Kollmorgen 1233999 - Motor
  • Kollmorgen CR06250 - Servo Driver
  • Kollmorgen S62000-SE - Servo Drive
  • Kollmorgen PSR4/5A-220 - Servo Power Supply
  • Kollmorgen AKM21C-ANSNAB-02 - Servo Motor
  • Kollmorgen PRD-0019030I-06 - Encoder Board
  • Kollmorgen PJT50 - Stepper Motor
  • Kollmorgen AKM32E-ANC2R-00 - Servomotor
  • Kollmorgen BDS4-MC4-10AZA-93361PR11A - Servo Board
  • Kollmorgen 3YL-20 - Motion Motor Control
  • Kollmorgen 900 - Spectra Film Gate Photometer
  • Kollmorgen EM10 - Module
  • Kollmorgen AKD-P02407-NCEC-0111 - Drive
  • Kollmorgen BDS4A-203J-0001/204A2 - Power Supply Servo Drive
  • Kollmorgen LE06565B-AG - Servo Drive
  • Kollmorgen CP-SS-R1HE-03 - Connector
  • Kollmorgen SERVOSTAR TM 606 - Servo Drive
  • Kollmorgen AKM41E-ANG2LB00 - Servomotor
  • Kollmorgen H-232-G-0802 - Servo Motor
  • Kollmorgen S70302-NANANA - Servo driver
  • Kollmorgen MH-225-B-63 - Motor
  • Kollmorgen F67WKSMBE.F.645.5/1d - Circuit Board Card
  • Kollmorgen 12310-002-3/3-02-2 - Circuit Board
  • Kollmorgen AKD-T00306-NBAN-0000 - Servo Drive
  • Kollmorgen AKD-B00606-NBAN-0000 - Servo Drive
  • Kollmorgen PE205561 - Servo Drive
  • Kollmorgen SERCOS Interface board - Sercos Interface board
  • Kollmorgen PRD-0057EXTz-02 - External Module
  • Kollmorgen M.1302.7479 - Sercos Plus Module
  • Kollmorgen N-X-99-2B-15.5-MT2-FC2-DB-EMR14X - Actuator
  • Kollmorgen F67WKSMB - Board
  • Kollmorgen AKM52H-BKCNAA-01 - Servo Motor
  • Kollmorgen AKM52K-ACC2R-00 - Servomotor
  • Kollmorgen M.1302.8287 - Patch Cord
  • Kollmorgen M.1302.8300 - Patch Cord
  • Kollmorgen DBL3-0130-30-Y-560 - Servo Motor
  • Kollmorgen BDS4A-103H-0015/105A21P - Servo Drive
  • Kollmorgen D13L-20810 - I/O Module
  • Kollmorgen B-202-C-23-096 - Servo Motor
  • Kollmorgen DIGIFAS7108-SPS - Servo Drive
  • Kollmorgen PA2800 - Drive Power Supply
  • Kollmorgen B-406-A-A3 - Servo Motor
  • Kollmorgen AKD-T00607-ICAN-0000 - Servo Drive
  • Kollmorgen PE205561-MZ - Servo Drive