GE IS200TBAIS1C 10 analog inputs
2.1.8.5 RDSD Error Reporting
Errors are indicated when the RDSD LED becomes solid red (not blinking). All errors are reported in the
Controller fault tables. If the Controller has faults in its fault tables before it receives a store, the fault
tables are written to plcfaultbefore.dat and iofaultbefore.dat on the RDSD. If the Controller has faults
in its fault tables after it receives a store, the fault tables are written to plcfaultafter.dat and
iofaultafter.dat on the RDSD. Previous versions of these files are deleted before the transfer. If either
fault table is empty, the corresponding file is not written and will not be present.
To read any of the .dat files mentioned above, open PACS Analyzer. In settings, enable file analyze.
Then click the file analyze button on the main screen. Select as Input File the .dat file to be analyzed.
Select as Output File the filename and folder into which you wish to deposit the resulting text. The
text will be in English.
If a hardware configuration that disables the USB port is stored to the CPU, the fault tables will not be
written to the RDSD at completion of the store operation because the USB port will be disabled at the
end of the store process.
RX3i CPU Features and SpecificationsCPU310 CPU315 CPU320/
CRU32015 CPE305 CPE310 CPE330 CPE400
Lifecycle Phase Discontinued -
use CPE310
Mature -
use CPE310
or CPE330
Mature -
use CPE330 Active Active Active Active
Microprocessor Specification 300 MHz Intel
Celeron
1 GHz Intel
Celeron M
1 GHz Intel
Celeron M
1.1 GHz Intel
Z510PT
Silverthorne
XL “Atom”
1.1 GHz Intel
Z510PT
Silverthorne
XL “Atom”
1 GHz AMD
G-Series Dual
Core SoC
GX-209HA
1.2 GHz AMD
G-Series Quad
Core SoC
GX-216HC
Operating System VxWorks VxWorks VxWorks VxWorks VxWorks VxWorks VxWorks
#RX3i Slots Occupied 2 2 2 1 2 2 N/A
Backplane <----------------------Supports High-Speed PCI IC695* and Serial IC694* Modules --------------------------> Field Agent
Temperature Range
RX3i 0°C to 60°C 0°C to 60°C 0°C to 60°C 0°C to 60°C16 0°C to 60°C15 0°C to 60°C -40°C to
70°C17
Power Requirements
RX3i +3.3Vdc 1.25 A 1.0 A 1.0 A 1.0 A 1.0 A 0 A N/A
RX3i +5 Vdc 1.0 A 1.2 A 1.2 A
1.0 A
(up to 1.5 A if
USB draws 0.5A)
1.0 A
(up to 1.5 A if
USB draws 0.5A)
0 A N/A
RX3i +24Vdc Relay with Energy Pack 0.5 A at start-up;
0.1 A otherwise
0.5 A at start-up;
0.1 A otherwise 0.750 A N/A
RX3i +24Vdc Relay w/o Energy Pack 0.625 A N/A
Input Power (Max) 20 W
Input Voltage (Min) 18 Vdc
Input Voltage (Max) 30 Vdc
Memory Backup Mechanism18 Battery
see GFK-2741
Battery
see GFK-2741
Battery
see GFK-2741
Energy Pack:
IC695ACC400
Energy Pack:
IC695ACC400
Energy Pack:
IC695ACC402
Energy Pack:
IC695ACC403
Display
LEDs LEDs LEDs LEDs LEDs LEDs LEDs & OLED

CPU310 CPU315 CPU320/
CRU32015 CPE305 CPE310 CPE330 CPE400
Firmware Upgrade
CPU Firmware Upgrade Mechanism <---------------WinLoader/Serial Port--------------->
v7.30 & later:
USB
earlier:
WinLoader/
Serial Port
v7.30 & later:
USB
earlier:
WinLoader/
Serial Port
Web Interface
Ethernet Port
Web Interface
Ethernet Port
Indirect Backplane Module Upgrade <-----------------------------------WinLoader/Serial Port------------------------------------>
Web Interface
Ethernet Port N/A
Program Portability
Direct Import (with limitations)19 CPU310,
CPU315
CPU315,
CPU320 N/A
RX3i PACSystems Applications using
Family Type Conversion Y
Program Security
Secure Boot Pending Y
Trusted Platform Module (TPM) Y Y
Program Storage
Battery-backed RAM 10 Mbytes20 20 Mbytes20 64 Mbytes20 5 Mbytes21 10 Mbytes21 64 Mbytes21 64 Mbytes21
Non-Volatile Flash 10 Mbytes 20 Mbytes 64 Mbytes 5 Mbytes 10 Mbytes 64 Mbytes 64 Mbytes
Battery Life Expectancy, RAM Backup18 see GFK-2741 see GFK-2741 see GFK-2741 N/A
Life Expectancy, Energy Pack
Capacitors 5 years 5 years 5 years 5 years
Auxiliary Storage
CFast Inactive N/A
Remote Data Storage Device (RDSD) Y - USB Y - USB Y - USB USB - pending
Micro SD pending