K-WANG

+086-15305925923
Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
Home >> GE >> GE IS421UCSBS1A processor
新闻动态
newS
   
Brand

GE IS421UCSBS1A processor

From: | Author:Wang | Time :2024-12-27 | 189 visit: | 🔊 Click to read aloud ❚❚ ▶ | Share:

GE IS421UCSBS1A processor

Effective with RX3i Firmware Release 8.603
, the CPE330 supports Ethernet Global Data (EGD)
Class 1. This feature is available on all firmware releases of CPE4004
.
▪ The rack-based IC695ETM001 Ethernet Interface has dual RJ45 ports connected through an
auto-sensing switch. This eliminates the need for rack-to-rack switches or hubs. The ETM001
supports upload, download and online monitoring, and provides 32 SRTP channels with a
maximum of 48 simultaneous SRTP server connections. It also supports Modbus TCP. For details
on Ethernet Interface capabilities, refer to PACSystems RX7i & RX3i TCP/IP Ethernet
Communications User Manual, GFK-2224.
▪ PROFIBUS communications via the PROFIBUS Master module, IC695PBM300. For details, refer to
the PACSystems RX3i PROFIBUS Modules User’s Manual, GFK-2301.
▪ PROFINET communications via any supported PROFINET Controller and any supported PROFINET
Scanner.
o Supported PROFINET Controllers include the embedded PROFINET Controller function
offered by IC695CPE400 and IC695CPE330, and the rack-mounted PROFINET Controller
module IC695PNC001.
o Supported PROFINET Scanners include the RX3i PROFINET Scanner module
IC695PNS0015
, the RX3i IC695CEP001, and the VersaMax PROFINET Scanner modules
IC200PNS001 & IC200PNS002.
For details, refer to the PACSystems RX3i PROFINET IO-Controller Manual, GFK-2571F or later and
PACSystems RX3i PROFINET Scanner Manual, GFK-2737F or later.
▪ Effective with the release of IC695CEP001 and IC694CEE001, the RX3i may be configured to
control a remote drop consisting of one or two I/O modules. The RX3i interface to the remote
drop is managed by the PROFINET Controller, IC695PNC001. Refer to PACSystems RX3i CEP
PROFINET Scanner User Manual, GFK-2883.
▪ HART Pass Through allows an RX3i CPU to communicate HART asset management data between
HART-capable I/O modules and PC-based asset management tools. This entails usage of PCbased applications, RX3i Analog modules with HART functionality and (optionally) supporting
PROFINET products. HART Pass Through operation is described in the PACSystems HART Pass
Through User Manual, GFK-2929.
The following RX3i CPUs support HART Pass Through: IC695CPE305, IC695CPE310, IC695CPU315,
IC695CPU320, IC695CRU320, IC695CPE330
6,7
(Firmware Release 8.50 or later).
The following RX3i analog modules support HART:
IC695ALG626
IC695ALG628
IC695ALG728
If used for HART Pass Through, the supporting RX3i PROFINET Controller and PROFINET Scanner
must also contain HART-compatible firmware:
3 Proficy Machine Edition Release 8.60 SIM 5 is required for EGD Class 1 on both LAN1 and LAN2 of CPE330. This PME version
also supports Advanced Configuration Parameters for EGD on CPE330. Alternately, PME Release 8.60 (not SIM 5) supports
EGD on CPE330 LAN1 only, and does not support Advanced Configuration Parameters for EGD.
4 Proficy Machine Edition Release 9.00 SIM 8 or later is required for native configuration support of the CPE400.
5
IC695PNS001 firmware release 2.40 added support for a number of I/O modules not previously supported, as documented
in PACSystems RX3i PROFINET Scanner Important Product Information, GFK-2738L.
6 When used to support HART Pass Through, CPE330 must do so via a PNC001 and cannot employ its embedded PROFINET
feature for this purpose.
7
IC695CPE330 firmware release 8.95 added support for the Remote Get HART Device Information COMMREQ


IC695PNC001-AK Firmware Release 2.20
IC695PNS001-ABAH Firmware Release 2.308
IC695CEP001-AAAD Firmware Release 2.30.
▪ Effective with the release of IC695GCG001, the RX3i may be equipped to control a Genius Bus.
The RX3i interface to the Genius Gateway is managed by the PROFINET Controller, IC695PNC001.
Refer to PACSystems RX3i Genius Communications Gateway User Manual, GFK-2892.
▪ Effective with the release of IC695EDS001, the RX3i may be configured as a DNP3 Outstation.
Refer to PACSystems RX3i DNP3 Outstation Module IC695EDS001User’s Manual, GFK-2911.
▪ Effective with the release of IC695EIS001, the RX3i may be configured to act as an IEC 104 Server.
Refer to PACSystems RX3i IEC 104 Server Module IC695EIS001 User’s Manual, GFK-2949.
▪ IC695CMM002 and IC695CMM004 expand the serial communications capability of the RX3i
system. Refer to PACSystems RX3i Serial Communications Modules User’s Manual, GFK-2460.
▪ CPE310, CPU310, CPU315, CPU/CRU320 and NIU001 provide two serial ports, one RS-232 and
one RS-485.
▪ CPE305 provides one RS-232 serial port.
▪ CPE330 provides no serial ports.
▪ The serial port on CPE400 is disabled.
▪ Effective with CPE305/CPE310/CPE4009 Firmware Release 9.20, or CPE330 Firmware Release
9.21, the CPE embedded Ethernet interface supports Simple Network Time Protocol (SNTP) Client,
Coordinated Universal Time (UTC), and Daylight Savings Time (DST). Refer to PACSystems RX7i,
RX3i and RSTi-EP TCP/IP Ethernet Communications User Manual, GFK-2224 version Q or higher.
  • Rolls-Royce R10I53S 98H0101A0000I Marine Panel Computer for Ship Automation and Integrated Vessel Control Systems
  • Woodward 8406-121 - EGCP-2 / EGCP - 2 Digital Control REV G
  • Woodward 8440-1019 A - SPM-D10/SPM-D Sync Controller synchronizing system
  • Woodward 5466-318 - MicroNet TMR Kernel P.S Module
  • Woodward 8270-1060 - SPEED CONTROLLER REV.D DYN1-10504-004-0-24 FINAL ASSY
  • Woodward 8440-1884 - EASYGEN-2500-5/P1 Genset Controller Rev. A WITHOUT ACCS
  • Woodward 9907-018 - LOW VOLTAGE 2301A LOAD SHARING AND SPEED CONTROL REV.H
  • Woodward 8440-2028 - DIGITAL I/O EXPANSION MODULE REV. NEW IKD1 IKD1M WITH CD
  • Woodward 5431-640 C - Dual Dynamics 1000 Series Speed Control Module
  • Woodward MFR2S45B/EVC1 - CONTROLLER RL20710
  • Woodward 8237-2600 - TURBINE CONTROL PANEL PROTECH GII, 8200-1302
  • Woodward 9907-838 - LOAD SHARING MODULE REV NEW
  • Woodward 8272-582 - APM MOTOR CONTROL 110-220V AC/DC
  • Woodward 5460-570 - SPEED REFERENCE MODULE
  • Woodward 8440-1041 - CONTROL MODULE
  • Woodward 5466-5026 - MICRONET SIMPLEX HIGH DENSITY ANALOG MODULE
  • Woodward 5441-693 - DIGITAL I/O MODULE
  • Woodward 9905-214 - 701 DIGITAL SPEED CONTROL REV J
  • Woodward 8273-1013 - 2301E-ST LOAD SHARING & SPEED CONTROL REV NEW
  • Woodward 9907-018 - 2301a / 2301A Low Voltage Load Sharing AND Speed Control REV.E
  • Woodward MRU4A0AB - HIGH PROTEC VOLTAGE PROTECTION RELAY REV:Y
  • Woodward DPG 2201-002 - Speed Governor (DPG-2201-002)
  • Woodward DYNT 17200 - MAGNETIC PICKUP SENSOR 3/8 07-16
  • Woodward 8440-2028 - IKD1M Digital I/O Expansion Module REV :NEW
  • Woodward 9907-018 - 2301A Load Sharing & Speed Control Rev: H Low Voltage
  • Woodward 8440-1884 - GENSET CONTROLLER EASYGEN-2500-5/P1 REV: K
  • Woodward 9907-173 - Module Load Sharing 120 Volt REV B
  • Woodward APECS MODEL 4500 - PROGRAMMABLE ENGINE CONTROL
  • Woodward 8406-121 - egcp-2 digital control
  • Woodward 8402-214 - SOGAV105 VALVE (24V) GAS METERING WITH 5852-130 800 N SOLENOID
  • Woodward 8440-1041 G - EXPANSION BOARD IKD1
  • Woodward 8444-1104 - MFR300 MULTI FUNCTION RELAY
  • Woodward LS-5 - Motherboard Synchronization Load Distribution Controller
  • Woodward 5460-571 A - SPEED SENSOR MODULE
  • Woodward 8272-582 - APM Motor Control 100-220V AC/DC
  • Woodward 8440-1614 - GCP-32 Genset Control Package REV:H
  • Woodward NC3116 - SEG GENERATOR CONTROLLLER 16463777
  • Woodward 9907-014 - 2301A SPEED CONTROL REV H
  • Woodward 8272-582 - APM MOTOR CONTROL
  • Woodward 8270-1060 - SPEED CONTROLLER REV.C DYN1-10504-004-0-24 FINAL ASSY
  • Woodward 8444-1074A - lsg / LSG Load Share Gateway Transducer Rev: LSG
  • Woodward 9907-018 - LOW VOLTAGE 2301A LOAD SHARING AND SPEED CONTROL REV.E
  • Woodward 8290-189 - Speed Controller Rev. U
  • Woodward 8290-189 - Speed Controller Rev. V
  • Woodward 8272-583 - APM Motor Control 24vdc
  • Woodward 8404-2006 - Lseries ITB 30m Actuator with Position Control logic
  • Woodward 8516-050 - 2400 RPM CW DRIVE SHAFT ROTATION MOTOR
  • Woodward 9905-016 B - Process Control Unit
  • Woodward 5484-721 - motor
  • Woodward 5501-470D - NETCON CPU_040 W/O LL MEMORY Rev A
  • Woodward 3522-1004 - BUM60-1224-54-B-001 EM- DRIVER BUM60-VC-A0-0093
  • Woodward 9907-019 - LOW VOLTAGE 2301A LOAD SHARING & SPEED CONTROL REV.H
  • Woodward 9907-018 - 2301A LOAD SHARING AND SPEED CONTROL REV.H
  • Woodward 8256-021 - EPG Rotary Actuator Model 524
  • Woodward 8446-1048 - EASYGEN RP-3000 ANNUNCIATOR REV:H HMI
  • Woodward 5501-471C - NetCon SIO Module Rev A
  • Woodward 8273-140 - 2301D LOAD SHARING AND SPEED CONTROL UNIT REV.A
  • Woodward 9905-211 - 701 DIGITAL SPEED CONTROL REV.J
  • Woodward 8272 64 - Motorized Potentiometer (MOP)
  • Woodward 9907-173 - Load Sharing Module 120V
  • Woodward 9905-797 - Digital Syncronizer
  • Woodward 8272-685 Rev L - Digital Reference Unit BRAND NEW IN BOX-
  • Woodward 8444-1081 - UMT1 Control Module 2751) [ ]
  • Woodward 9906-226 - 721 Digital Control 18W NEW LISTING
  • Woodward 8272-518 - Motor Control 110VDC Input Woodward P/N 8272 518
  • Woodward 8521-367 - UG-8 Governor P/N R R.P.M 750-1280 / UG8
  • Woodward 9907-019 Rev New 9703 - Low Voltage 2301A Load Sharing & Speed Control
  • Woodward 2001-12E2U1B1S1A 2000-4505 - FUEL SHUTOFF STOP SOLENOID VALVE
  • Woodward Easygen-2500-5 - GENSET CONTROLLER - FOR PART
  • Woodward 2001-12E2U1B1S1A 2000-4505 - FUEL SHUTOFF STOP SOLENOID VALVE
  • Woodward 9907-018 - 2301A speed control board
  • Group 8272-583 - Apm Motor Control DC24V
  • Woodward 8272-583 - Amp Motor Control DC24V
  • Woodward DPG-2201-002 - Digital Controller Revision New
  • Woodward 8440-1884K REV,K - GENERATOR CONTROLLER EASYGEN-2500-5
  • Woodward 8272-824 REV.C - LVDT SIGNAL CONDITIONER
  • Woodward 8272-582 - APM Motor Control
  • Woodward 9907-838 - LOAD SHARING MODULE REV. NEW
  • Woodward SA-4478 - EPS1000 Speed Switch
  • Woodward z 21 - governor motor rpm 1350
  • Woodward 5418-151 - Computer Assy : for Woodward 8273-256 Atlas Controller
  • Woodward 8272-517 - Pm Electric Motor
  • Woodward 5448-914 - GCP-20 Genset Controller GCP-20 REV D P/N:
  • Woodward 8440-1884 Rev J E231544 - Easy Gen 2000 Genset Controller
  • Woodward 5501-471 REV B - NETCON 5000B SIO W/SCREW POSTS
  • Woodward 8440-2512 REV B - LS-5 CIRCUIT BREAKER CONTROL PROTECTION LS-511-5/P1
  • Woodward 5466-256J REV F - Discrete I/O Module PCB
  • Woodward 8290-048 Rev. F - Generator Load Sensor 8290048
  • Woodward 9906-619 REV A - 723 PLUS DIGITAL CONTROL
  • Woodward 8440-1832 - GCP-31 NATIONAL OILWELL VARCO
  • Woodward 5466-031 REV H - NETCON IO CONTROLLER
  • Woodward ProTech 203 - Overspeed Protection System, For Parts/Repair
  • Woodward 8404-1006 - Control Module
  • Woodward 8444-1002 REV G - UMT1 MEASURING TRANSDUCERS
  • Woodward 8440-2151 REV:A - LS-522-5/P1 HMI DISPLAY [BRAND NEW ]
  • Woodward 8270-274k - Pamp Generator
  • Woodward 9907-028 REV E - SPM-A SYNCHRONIZER MODULE
  • Woodward XRW1-47 / XRW147 - 1pc XRW147 XRW1-47
  • Woodward 8440-2050 J REV - EASYGEN-3200-5 GENSET CONTROLLER (TESTED FAST SHIP)
  • Woodward 8406-011 REV.AC - GEN PART 6000 24V DC CONTROLLER - W/O ANY ACCS.
  • Woodward 8444-1019 E - Measuring Transducer WOODWARD UMT 1
  • Woodward 9907-166 Rev R - 505 Turbine Control Operator Panel New
  • Woodward 5501-471 - Actuator Driver Module, 4 Channel, (UPP)
  • Woodward 5484-875 - PM MOTOR 24VDC 5 RPM
  • Woodward 8405-062 - Actuator
  • Woodward smm40 - speed adjusting motor
  • Woodward DPG-2201-002 REV D - DIGITAL CONTROLLER NEW LISTING
  • Woodward 5484-875 - PM MOTOR 24 VDC 5 RPM
  • Woodward 5437-845 - board-notch filter 3khz
  • Woodward BL20400 - 3X400 VAC Battery Charger
  • Woodward 8800 - 1001 Rev-C - DSS-2, 2 Channel Digital Speed Switch I/N:
  • Woodward 9905-971 Rev J - Linknet 16 Channel Discrete Input Module 18-32VDC 14.2W
  • Woodward 5501-224 revC - Control Board
  • Woodward 8901-037 - Booster Servo Motor
  • Woodward 1767-367 S/N: 0920702 - Z21 WK GOVERNOR MOTOR 2700 RPM KM 58-20 K 230V
  • Woodward CSC3SUWA REV K - CSC3SUWA Controller
  • Woodward 8272-583 - APM MOTOR CONTROL
  • Woodward 5437 18 Rev.A - module netcon derivative analog
  • Woodward 5448-885 REV F - MFR1 MULTI FUNCTION RELAY
  • Woodward 8273-456 REV.A - ATLAS W/O PC104 MODULE
  • Woodward 9905-377 - 2301A Load Sharing and Speed Control
  • Woodward 5466-031 REV. C - Netcon Control Module
  • Woodward 8270-007 - Load Signal Control
  • Woodward 8440-1884 C - Controller Easygen 2500-5
  • Woodward 8270-975 REV.G - 2301 AMPLIFIER MODULE
  • Woodward 1766-463 - Governor Speed Adjusting Motor 24 VDC
  • Woodward 9907-162 Rev:F - 505 Turbine Controller
  • Woodward 9907-838 - Speed control