+086-15305925923

K-WANG

Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
Home >> xYCOM >> XYCOM MOTION 1300-00010000000000H Operating Interface 100-120 VAC
新闻动态
newS
   
Brand

XYCOM MOTION 1300-00010000000000H Operating Interface 100-120 VAC

From: | Author:Wang | Time :2025-05-30 | 508 visit: | Share:



XYCOM MOTION 1300-00010000000000H Operating Interface 100-120 VAC
Product Overview

The 1510 Node Box PC Computer System offers a powerful, compact package for the factory floor and other harsh environments. 

The 1510 features an openarchitecture to meet a wide variety of applications that require both a powerful PC and a durable industrial enclosure. 

The system integrates a 80 GB hard drive, 10 slot passive backplane, and CDRWDVD ROM in a truly industrial form.

The system’s highly expandable design allows easy access to expansion boards,jumpers, power supply, and disk drives.

Standard Features

The 1510 offers the following standard features:
• Panel or shelf mountable, horizontally or vertically
• Intel Socket 478 Pentium 4 3.0 GHz, 512 KB cache, 400 MHz System Bus

• 10 slot passive backplane with the following available expansion (4 slots are dedicated to the CPU):

• two full length ISA  
• three full length PCI
• one half length PCI length
• Status LEDs
• Power
• Hard Disk activity
• CDRW/DVD ROM activity etc…
• External connection ports
• 2 serial ports (Two RS-232 ports)
• One parallel port
• PS/2 keyboard and mouse ports (use of both via Y-cable)  
• VGA port
• Audio (In, Out, Mic)
• Two USB 2.0 ports
• One 10/100 Base T Ethernet port and one 10/100/1000 Base T Ethernet port.
• 4X AGP graphics controller with up to 8MB and up to 64MB from system
RAM; Dynamic Video Memory support.
• Front accessible CDRW/DVD ROM drive
• Front accessible 3.5-inch (1.44 MB) internal floppy drive
• 80 GB internal hard drive (minimum)
• Integrated PCI IDE  
• Power switch (refer to warning in Quick Startup section of this chapter)

• Award 4MB Flash BIOS


Optional Features

184-Pin DDR SDRAM
• 512 MB DDR SDRAM
• 1 GB DDR SDRAM
• 2 GB DDR SDRAM
Operating Systems
• Windows® 2000
• Windows® XP Professional
Unpacking the System

When you remove the 1510 from its box, verify that you have the parts listed below. 

Save the box and inner wrapping in the event you need to reship the unit.

• 1510 unit
• Documentation kit, which includes:
• Diagnostic software disk (units shipped with MS-DOS only)
• Documentation Support Library CD (documentation and drivers)
• 1510 manual
• Drivers
• Pro-face/Xycom Recovery Media and documentation for Windows 2000.
• Installation disk for Windows XP (if applicable)
• AC power cord
• Mounting Hardware:
• Four 10-32 x 5/8 screws
• Mounting brackets for vertical or horizontal mounting
• Miscellaneous:
• Screws
• Cables
• Ties
• Feet
Quick Start-up
This section gives you the steps to get the 1510 up and running without explaining the capabilities and options of the system.
Warning
Turn off the power to the unit and disconnect the power cord before adjusting the inside or the outside of the computer.
To prepare the system for use, perform the following steps:
Attach a keyboard to the keyboard port.  
Attach other optional equipment following the instructions in Chapter 2.
Attach a monitor to the VGA connector.
Attach the power cord from the power receptacle to a properly grounded 115
230 VAC, 50-60 Hz outlet.
Turn on the power to the unit.  
The system will boot up at the C: prompt.
Install application software that you will use onto your system via the CD-ROM drive or network.
The following instructions describe the installation of ISA or PCI expansion boards.
Turn off power to the unit and unplug the power cord on the rear of the 1510.
Check that the board’s memory and I/O configuration do not conflict with the CPU and I/O memory maps in your CPU board manual.

Remove the side panel. With the front of the unit facing you, lay the 1510 on its right side. 

Remove the eight screws that hold the left side panel in place.

Remove the ORB screw and blank ORB from the desired track (see figure 2–5).
Remove the two screws from the hold down bracket and remove the hold down bracket (see figure 2–5).
Slide the ISA or PCI expansion board into the desired slot.
Push the board into the backplane connectors.
Use the clamps included in the kit shipped with your unit to secure the board to the hold down bracket (see figure 2–5).


Mounting Considerations

This section describes issues you must address before placing the 1510 inside an enclosure.
Consider the following points and precautions:
• Select an enclosure and place the unit in a position that allows easy access to the 1510 ports.
• Account for the unit’s depth when choosing the depth of the enclosure.
• The unit must be mounted in an approved fire and electrical enclosure.  
• The 1510 can be mounted in a vertical or horizontal position. See Mounting
Brackets and Mounting Dimensions, and Mounting the Unit in Chapter 2.
• Consider locations of accessories such as AC power outlets for installation and maintenance convenience.
• Prevent condensation by installing a thermostat-controlled heater or air conditioner.
• To allow for maximum cooling, avoid obstructing the airflow.

• Place any fans or blowers close to the heat generating devices. If using a fan, ensure that outside air is not brought inside the enclosure unless a fabric or other reliable filter is used. 

This filtration prevents conductive particles or other harmful contaminants from entering the enclosure.  (Continued on the next page)

• Do not select a location near equipment that generates excessive electromagnetic interference (EMI) or radio frequency interface (RFI) (equipment such as high power welding machines, induction heating equipment and large motor starters).
• Place incoming power line devices (such as isolation or constant voltage transformers, local power disconnects, and surge suppressers) away from the
1510. The proper location of incoming line devices keeps power wire runs as short as possible and minimizes electrical noise transmitted to the 1510.
• The power cord outlet must be installed near the equipment and shall be easily accessible.
• Avoid overloading the supply circuit.
• Incorporate a readily accessible disconnect device in the fixed wiring for permanently connected systems.
• Make sure the location does not exceed the 1510’s shock, vibration, and temperature specifications.


Mounting the Unit

Once the mounting considerations in this chapter have been met, mount the 1510 according to the following instructions:
Locate a position for your 1510 that meets the specifications required.
Refer to the Mounting Dimensions (figure 2–6 or 2–7) as a guide for mounting your system.

Mount and secure the 1510 unit, if required, using the mounting brackets.  

Refer to the section titled Securing the Mounting Brackets for information about attaching mounting brackets to the 1510.    

Attach one end of the power cord to the power receptacle and the other end to a properly grounded 115-230 VAC, 50-60 Hz outlet.  

Implement the proper grounding techniques. 

Establish a ground path from the 1510 chassis to the enclosure chassis. A 6-32 threaded ground point hole is provided on the left back of the front panel (as viewed from the front) of the unit.

There is also an internal ground point  Turn on the power. 

The system will boot up to the operating system installed.

Install application software via a floppy drive or CD-ROM type drive.

NEW XYCOM 9450-27B1319010000 OPERATOR PANEL 945027B1319010000 - SB ...


  • Kollmorgen PSR4/5A-220 - Servo Power Supply Module
  • Kollmorgen pcb-r0461000-31 - Board
  • Kollmorgen Opt x2 Pro 7 - Display
  • Kollmorgen AKM31H-ANC2EG00 - Motor
  • Kollmorgen AKI-CDT-MOD-15T-000 - HMI Module
  • Kollmorgen ERH-26 - Resistor
  • Kollmorgen M.1016.2536 - Axis Cable
  • Kollmorgen PRD-0019100E-00 - Servo Drive Boards
  • Kollmorgen 00D12A02110-1 - Motor
  • Kollmorgen M.1016.9514 - Interface Cable
  • Kollmorgen S21260-SRS - Drive
  • Kollmorgen M.1016.2566 - I/O Cable
  • Kollmorgen D062A-12-1210 - Motor
  • Kollmorgen M.1016.2565 - Cable
  • Kollmorgen M.1302.6402 - Sercos Cable
  • Kollmorgen ps-1 - Power Supply
  • Kollmorgen Step Motors & Controls - Product Catalog
  • Kollmorgen AKM21E-CKBNEH00 - Servo Motor
  • Kollmorgen BDS5A-106-01010/03011A2-030-001 - Servo Driver
  • Kollmorgen S30361-SE - Servo Drive
  • Kollmorgen EM1-98 - Module
  • Kollmorgen DMC50720EXT24V - Servo Drive
  • Kollmorgen EM-1 - Module
  • Kollmorgen AKM21G-ENSN2-02 - AC Servo Motor
  • Kollmorgen CF-SS-RHAE-03 - Cable
  • Kollmorgen M.3000.1408 - Cable
  • Kollmorgen EB-204-B--91-001 - Brushless Motor
  • Kollmorgen SERVOSTAR 606 - Servo Drive
  • Kollmorgen C-78530-2 - Power Supply Board
  • Kollmorgen M.1016.2261 - Memory Module
  • Kollmorgen C-78167-3 C-78166-2 - Pulse Generator Board
  • Kollmorgen B-202-C-23 - Servo Motor
  • Kollmorgen EM2-27 - Module
  • Kollmorgen AKM31H-ANCN2-00 - Servomotor
  • Kollmorgen AKM32E-ANC2R-00 - Servomotor
  • Kollmorgen C-78799-2 - Board
  • Kollmorgen PSR4/5A-112 - Power Supply
  • Kollmorgen M.1302.8619 - Resolver Cable
  • Kollmorgen TPAR-3330-34 - Drive Unit
  • Kollmorgen M21NSXA-LNS-NS-05 - Step Motor
  • Kollmorgen S72401-NA - Servo Drive
  • Kollmorgen 12310-000-3/3-02-2 - Circuit Board
  • Kollmorgen M.1302.8447 - Encoder Cable
  • Kollmorgen TPAR-3340 - Velocity Drive Amplifier
  • Kollmorgen B-202-B-21 - Servo Motor
  • Kollmorgen SBD2-16-1102-29360BA29/160-16 - Servo Drive Board
  • Kollmorgen VP-507BEAN-03 - Power Cable
  • Kollmorgen S72402-PBNAPM - Servo Drive
  • Kollmorgen CE03550 - Servo Drive
  • Kollmorgen LE03565-JW02 - Servo Drive
  • Kollmorgen A.F.031.5/07 - Sercos Interface Board
  • Kollmorgen C-78087-1 - Board
  • Kollmorgen 610 - Servo Drive
  • Kollmorgen M21NRXC-JNN-NS-02 - Step Motor
  • Kollmorgen DBL3H00250-BR2-000-S40 - Servo Motor
  • Kollmorgen C-78182-1 - Board
  • Kollmorgen 610-AS - Servo Drive
  • Kollmorgen PRD-PE210EOH-00 - Controller
  • Kollmorgen ESD-1024-315-G - Encoder
  • Kollmorgen VP-507BEAN-M3 - Power Cable
  • Kollmorgen C-78178-1 - Board
  • Kollmorgen TT-2043-1011-B - DC Motor
  • Kollmorgen VP-507BEAN-01 - Power Cable
  • Kollmorgen M-405-A-A1 - Servo Motor
  • Kollmorgen Prd-0017000L-30 - Robot Axis Control Module
  • Kollmorgen S70601-SENA-NA-0X9 - Servo Drive
  • Kollmorgen C-78166-1 - Board
  • Kollmorgen S20360-VTS - Servo Drive Data Cable
  • Kollmorgen S403AM-SE - Servo Drive
  • Kollmorgen VFS5-275-00120/2604A-015 - Servodrive
  • Kollmorgen MT304TB1-R2F4 - Servo-Motor
  • Kollmorgen 601 - Servo Drive
  • Kollmorgen CR10704 - Servo Drive
  • Kollmorgen PSR4/5A-112 - Industrial Drive
  • Kollmorgen PRD-MZ40ASIz-62 - Servo Drive
  • Kollmorgen M.1016.2514 - Axis Cable
  • Kollmorgen EM2-19 - Module
  • Kollmorgen M.1301.5566 - Cable
  • Kollmorgen LR10665 - Servo Driver
  • Kollmorgen AKI-CDA-MOD-04T - Operator Terminal Display
  • Kollmorgen PRD-B032010z-11 - Servo Board
  • Kollmorgen M.1302.8606 - Endat Cable
  • Kollmorgen M.1016.2513 - Axis Cable
  • Kollmorgen MW1000512 - Linear Magnet Way
  • Kollmorgen B-606-BA-91-TR501-008 - Servomotor
  • Kollmorgen urs3310a-300-x23 - Servo Motor
  • Kollmorgen CR06561 - Servo Drive
  • Kollmorgen il03030a1104 - Direct Drive Linear Motor
  • Kollmorgen 6SM-56-S-3000 - Servo Motor
  • Kollmorgen KXA-48-8-16/AUX - PCB Card
  • Kollmorgen 443M-C - Servo Drive
  • Kollmorgen DBL4H00260-0R2-000-S40 - Servo Motor
  • Kollmorgen PRD-AG50100B-00 - Servo Board
  • Kollmorgen s30601-na - Servo Drive
  • Kollmorgen M.1302.0944 - Encoder Cable
  • Kollmorgen M.1016.2725 - Connector
  • Kollmorgen C-78684-1 - Board
  • Kollmorgen PROFIBUS dp 001106712385 - Profibus Module
  • Kollmorgen 768-026902-01 - Board
  • Kollmorgen AKM42E-GNC2R-00 - Servo Motor
  • Kollmorgen AKD-P00306-NBEC-0069 - Servo Drive
  • Kollmorgen SPAE1115-503 - Power Supply Drive
  • Kollmorgen AKM52G-ANCSEJ02 - Servo Motor
  • Kollmorgen BE25A20IE-K41 - Brushless Servo Amplifier
  • Kollmorgen C-78167-3 - Pulse Generator Board
  • Kollmorgen C-78770-3 - Board
  • Kollmorgen A-80387-2 - PCB
  • Kollmorgen 3EF-50 - Line Filter
  • Kollmorgen RP0601 - Power Block Industrial Drive
  • Kollmorgen SE20200 - Servo Amplifier
  • Kollmorgen ESA10/75HT - Servo Amplifier & DC Motor
  • Kollmorgen M.1302.1115 - Power Cable
  • Kollmorgen AKM43G-EKCNR-01 - Servo Motor
  • Kollmorgen IC11075A1T5P1 - Linear Actuator
  • Kollmorgen 60WKS-CE240/12PB - Servo Amplifier
  • Kollmorgen AKM32D-ANC2R-00 - Servo Motor
  • Kollmorgen CR03260 - Servo Drive
  • Kollmorgen ICD10-100A4TRC1-2K01702 - Linear Direct Drive
  • Kollmorgen DGE-25-850-ZR-LV-RF-KG-KF-GA - Linear Actuator
  • Kollmorgen M.1302.5835 - Encoder Cable
  • Kollmorgen CR10250 - Servo Drive
  • Kollmorgen SR20200-00000 - Servo Drive
  • Kollmorgen M.1302.1114 - Power Cable
  • Kollmorgen NEAT-310M - Stepping Motor Controller
  • Kollmorgen A-78703-2 - Board
  • Kollmorgen RK-V 6SM/DBL/K - Servo Cable
  • Kollmorgen PRD-0W13000F-11 - Circuit Board
  • Kollmorgen A.F.031.5 - Sercos Interface Board