Mitsubishi GOT2000 series graphic operation terminal

Mitsubishi GOT2000 series graphic operation terminal

Positioning and Applicable Scope

GOT2000 series HMI Utility function manual, covering:

Applicable models: GT27, GT25, GT23, GT21, widescreen/open frame/rugged models Handy GOT

Core uses: system configuration, communication settings, permission security, extended functions, maintenance diagnosis, data management

Supporting software: GT Works3/GT Modeler 3

Safety regulations (mandatory)

1. Warning

External hardware interlock must be configured, and GOT cannot be used as the only device for major security alarms

Backlight failure can cause touch abnormalities, and the failure logic varies among different models

Touch restrictions: GT27 prohibits touch with three or more points, and other models prohibit touch with two or more points simultaneously

Communication interruption can cause monitoring failure, and critical operations must be configured with physical switches

Network usage requires the deployment of firewalls VPN、 Antivirus protection against attacks

2. Attention (CAUTION)

Distance between communication line and power line * * ≥ 100mm**

Prohibit sharp objects from pressing the screen

Keep fixed IP blacklist: 192.168.0.18, 192.168.3.18

The installation torque strictly follows the model specifications: 0.20-0.50N · m

Power off operation, installation, wiring, and maintenance

Utility core structure (5 major modules)

Module 1: GOT Basic Setting

Covering 15 core configurations, the key parameters are as follows:

Key parameter description of the project

Display screen maintains 0-60 minutes, brightness 1-32, human body sensing supports backlight fault detection

Language options include Japanese/English/Simplified Chinese/Traditional Chinese/Korean font library

IP 0.0.0.0–255.255.255.255、 Ports 5014/5015 dual Ethernet ports, wireless independent configuration

Time SNTP/controller synchronization, GMT ± 13 time zone, supports battery power-off maintenance

Controller channels 1-4, 5V power supply, communication parameters support Mitsubishi's full range of PLC drivers

Security level 0-15, operator accounts up to 1000 administrator/sub administrator levels

Module 2: Extended Function

SoftGOT-GOT link: Exclusive permission, priority 0-3600s

VNC Server: Operation Guarantee Time Setting

Backup/Trigger Backup: Maximum Backup Count 0-50, Support Time/Rising Edge Trigger

Video/RGB/Multimedia: NTSC/PAL, resolution 640 × 480/768 × 576

Wireless LAN: AP/Station mode SSID、 Channel and connection status viewing

IQSS/ANDON/Network Drivers: Integrating with Factory Informatization

Module 3: Maintenance Diagnosis

Provide complete self diagnosis capability, key items:

Batch self-test: power on time, system version, communication, history export

Touch calibration: Four point calibration to eliminate offset

System alarm: error code+message, supports reset

Inspection tools: drawing color deficiency, font, touch dead zone, RS232 self loop, Ethernet Ping

USB management: Secure pop-up to prevent data damage

Module 4: Monitor

Directly connect to the controller, supporting:

Equipment monitoring, ladder diagram monitoring (iQ-R/F/FX)

Network/Intelligent Module/Servo/Motion/CNC Monitoring

Log viewing, program editing, diagnostic wizard

Module 5: Data Control

Unified management of engineering and log data:

CSV export of alarm/recipe/log/operation records

Backup/restore, SRAM management, memory card formatting, bad block check

Supported drivers: A (SD), B/E/F/G (USB), N (network)

Key specifications and limitations

Operator account: GT27/25:1000; GT23:255 pieces

Security level: 0-15

Touch inspection unit: 16 × 16 dots

Maximum backup quantity: 0-50

IP filtering rules: up to 32 entries

Wireless channel: Automatic/1-13

Key questions and answers

Question 1: What are the mandatory security restrictions for GOT2000 touch operation? What risks will violating lead to?

answer:

GT27: Do not touch 3 or more points simultaneously

GT25/GT23/GT21: Do not touch 2 or more points simultaneously

Risk: Multi touch can cause switch misoperation, output jumping, and device misoperation, which may result in personal injury or equipment damage; When the backlight fails, the screen darkens but the touch is still available, which can easily lead to unconscious operation.

Question 2: How does GOT2000 achieve multi-level permission and security management? What are the core configuration items?

answer:

Adopting a three-level system of administrator, sub administrator, and operator:

Administrator: Fully manage accounts, password policies, and security parameters

Sub administrator: Manage low-level operators with restricted permissions

Operator: Use the screen and functions according to the level (0-15)

Core configuration:

Authentication method: account password/external serial port/USB authentication

Automatic logout: 1-60 minutes

Password validity period: 1-1000 days

Continuous error locking: 3-10 failed locks

IP filtering: Allow/block access to specified addresses

Question 3: What are the three most commonly used functions in GOT2000 maintenance diagnosis? What problems should be solved separately?

answer:

Touch panel calibration

Solution: After long-term use, there are issues with touch offset and inaccurate points, which can be restored to accuracy through four point calibration.

I/O self loop check+Ethernet Ping

Solution: Communication failure, wiring error, parameter error, quickly locate hardware/configuration faults.

Batch self check+system alarm

Solution: Crash, black screen, abnormal restart, abnormal driver, export logs for after-sales analysis.