K-WANG

+086-15305925923
Service expert in industrial control field！
English 简体中文
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
Home >> Other Brands >> Parker Compumotor ZETA6000 series single axis independent drive controller
新闻动态
newS
   
Brand

Parker Compumotor ZETA6000 series single axis independent drive controller

From: | Author:Wang | Time :2026-04-09 | 219 visit: | 🔊 Click to read aloud ❚❚ ▶ | Share:

Parker Compumotor ZETA6000 Series: High‑Performance Single‑Axis Drive/Controller Systems for Precision Motion Control

Introduction
In modern industrial automation, single‑axis motion subsystems demand compactness, ease of installation, high positioning accuracy, low vibration, and reliable long‑term operation. Traditional motion setups often separate drive and controller components, increasing wiring complexity, installation time, and potential points of failure. The Parker Compumotor ZETA6000 Series addresses these challenges with an all‑in‑one drive/controller design that consolidates motion computation, power drive, signal conditioning, and I/O management into one unit. Built on the proven 6000 Series command platform, the ZETA6000 Series maintains programming simplicity while supporting advanced functions such as phase shifting, electronic gearbox, and flying cutoff. It supports daisy‑chain and multi‑drop communication for multi‑axis coordination and is compatible with standard Windows‑based development tools, enabling rapid project deployment for OEMs, system integrators, and end users. This article systematically reviews the product positioning, model differentiation, performance features, interface design, software ecosystem, and environmental specifications of the ZETA6000 Series to provide a full technical reference for precision motion control applications.


Product Overview and Model Classification

The ZETA6000 Series is a family of stand‑alone, single‑axis integrated drive/controller systems engineered for cost‑effective, clean, and complete single‑axis motion solutions. The series includes four models distinguished by output current and input voltage range, allowing users to match drive capacity to motor and load requirements.
2.1 Model Lineup
ZETA6104: 4 Apk motor current, 95–132 VAC single‑phase input, 170 VDC nominal bus voltage.
ZETA6104‑240: 4 Apk motor current, wide‑range 95–264 VAC single‑phase input, supporting 120 VAC (170 VDC) and 240 VAC (340 VDC) operation.
ZETA6108: 8 Apk motor current, 95–132 VAC single‑phase input, 170 VDC nominal bus voltage.
ZETA6112: 12 Apk motor current, 95–132 VAC single‑phase input, 170 VDC nominal bus voltage.
All models share the same control core, command set, I/O structure, and communication protocol, ensuring interchangeability and simplified inventory management. The series uses removable screw terminals and a standard 50‑pin header, eliminating connector cutting or rework during cable routing and significantly reducing on‑site installation and maintenance time.
2.2 Scalability for Multi‑Axis Systems
Although designed primarily for single‑axis use, the ZETA6000 Series supports scalable multi‑axis coordination:
Up to 99 units can be daisy‑chained via RS‑232C.
Up to 99 units can be multi‑dropped using RS‑485 (with 32 units recommended for standard multi‑drop topology).

This architecture enables modular expansion in assembly lines, indexing tables, winding machines, and cut‑to‑length systems without dedicated multi‑axis controllers.


Core Motion Performance and Proprietary Technologies

The ZETA6000 Series achieves industry‑leading smoothness and responsiveness through dedicated motion control algorithms and proprietary damping technologies, setting it apart from conventional stepping systems.
3.1 Performance Specifications
Position range: ±2,147,483,648 steps, supporting high‑precision long‑travel positioning.
Velocity range: 1 to 2,000,000 steps per second, covering low‑speed smooth scanning and high‑speed traversing.
Acceleration range: 1 to 24,999,975 steps/sec², supporting fast start‑stop and high‑dynamic maneuvers.
Motion algorithm update rate: 2 ms, ensuring real‑time responsiveness and trajectory stability.
Encoder input: Differential or single‑ended incremental encoder support, TTL/CMOS compatible, maximum input frequency 1.6 MHz, minimum transition interval 625 ns.
3.2 Active Damping™ Technology
Active Damping™ improves dynamic stiffness and stability in stepper motor systems:
Achieves damping ratios up to 0.5.
Increases acceleration compared to conventional step systems.
Reduces mid‑speed resonance and motor vibration.
Boosts effective shaft power and continuous throughput.
Enhances overall contouring and positioning stability.
3.3 Electronic Viscosity™ Technology
Electronic Viscosity™ optimizes steady‑state and low‑speed behavior:
Reduces settling time for high‑precision positioning tasks.
Improves smoothness at slow speeds and minimizes velocity ripple.
Lowers audible noise during operation.
Together, these two technologies make the ZETA6000 Series suitable for semiconductor equipment, laboratory automation, packaging, and labeling machinery.


Electrical Specifications and Power Design

The ZETA6000 Series uses a regulated DC bus architecture to deliver clean, stable power to stepping motors while maintaining compatibility with global mains supplies.
4.1 Input Power and Bus Voltage
ZETA6104, ZETA6108, ZETA6112: 95–132 VAC single‑phase, 50/60 Hz, nominal 170 VDC bus.
ZETA6104‑240: 95–264 VAC single‑phase, 50/60 Hz; 170 VDC at 120 VAC, 340 VDC at 240 VAC.
Wide‑range operation supports deployment in regions with unstable or varying grid voltage.
4.2 Motor Output Current
ZETA6104 / ZETA6104‑240: 0–4 Apk.
ZETA6108: 0–8 Apk.
ZETA6112: 0–12 Apk.
The current range supports small‑to‑medium frame stepper motors commonly used in labeling, cutting, positioning, and conveying applications.
4.3 Internal Power Resources
Built‑in +5 VDC supply available on COM2, encoder, and I/O connectors.
Total +5 V load current limited to 0.5 A across all I/O connections.
V_I/O terminal supports 5–24 V, up to 100 mA, for flexible input logic configuration.
AUX‑P and IN‑P support 0–24 V, up to 50 mA and 100 mA respectively, for sourcing or sinking I/O configurations.

I/O Configuration and Interface Capabilities

The ZETA6000 Series provides rich, optically isolated, field‑compatible I/O for direct integration with sensors, actuators, PLCs, and operator panels.
5.1 Input Interface
Home and limit inputs: HOME, POS, NEG for homing and overtravel protection.
Fast trigger inputs: TRG‑A, TRG‑B for high‑speed position capture, registration, and cut control.
16 programmable general‑purpose inputs: Opto‑22 compatible, HCMOS logic, internal 6.8 kΩ pull‑up to IN‑P.
Input thresholds: ≤1/3 V_I/O = LOW, ≥2/3 V_I/O = HIGH; 0–24 V range.
5.2 Output Interface
8 programmable general‑purpose outputs: optically isolated from the MCU, open‑collector with 4.7 kΩ pull‑up.
1 auxiliary programmable output (OUT‑A): total 9 configurable outputs.
OUT‑P supports 0–24 V, up to 50 mA; outputs sink up to 300 mA or source up to 5 mA.
Isolation improves noise immunity in industrial environments.
5.3 Communication Ports
RS‑232C port: 3‑wire (Rx, Tx, GND), 9600 baud (auto‑baud option), 8N1, full duplex.
RS‑232C/RS‑485 configurable port: supports 2‑wire or 4‑wire RS‑485, 9600 baud, 8N1, half duplex.
Unit addresses are software or DIP‑switch selectable for network identification.
5.4 Operator Interface
Direct connection to RP240 remote operator panel.
Stand‑alone operation or host control via PC, PLC, or thumbwheels.
Four diagnostic LEDs: power on, step pulses, over‑temperature, motor short circuit.


Programming Language and Software Ecosystem

The ZETA6000 Series uses the mature 6000 Series command language, balancing power and ease of use.
6.1 Command Language Features
150,000 bytes of non‑volatile memory for program and path storage.
Error interrupt handling for safe automated recovery.
Position capture and registration via trigger inputs.
Programmable damping for load adaptation.
Variable storage, conditional branching, and arithmetic functions.
Debug tools: single‑step, trace, breakpoints, error messages, I/O simulation.
6.2 Standard and Optional Software
Motion Architect™: standard Windows‑based development environment for fast program creation.
DLL library: supports Windows and Windows NT SDK integration.
Motion Toolbox™: LabVIEW virtual instruments for graphical programming.
DDE6000 Server: enables data exchange between Windows applications.
Motion Builder™: visual icon‑based development environment.
This software stack supports both script‑based and graphical programming styles.


Protection Circuits and Reliability Design

Reliability is reinforced by multi‑level protection to guard the drive, motor, and machine.
7.1 Protection Functions
Motor short‑circuit: phase‑to‑phase and phase‑to‑ground detection.
Over‑temperature: internal drive and power supply shutdown at 55°C (113°F).
Overvoltage: protects against regenerative voltage spikes.
Power dump: dissipates excess regenerative voltage.
Brownout: detects AC input below 85 VAC.
7.2 Environmental Ratings
Operating temperature: 0°C to 45°C (32°F to 113°F); fan cooling recommended for low airflow.
Storage temperature: ‑30°C to 85°C (‑40°F to 185°F).
Humidity: 0–95% non‑condensing.
Motor case temperature: maximum 100°C (212°F), dependent on duty cycle.
7.3 Certifications
UL Recognized.
CE (LVD) compliance.
These certifications support global installation and factory acceptance.


Application Scenarios and Technical Advantages

The ZETA6000 Series is optimized for single‑axis motion tasks requiring precision, quiet operation, and quick setup.
8.1 Typical Applications
Packaging and flying cutoff systems.
Labeling, printing, and registration control.
Automated positioning and indexing tables.
Winding, spooling, and material feed.
Assembly automation and pick‑place mechanisms.
Laboratory and medical instrumentation.
8.2 Core Competitive Advantages
All‑in‑one design: reduces cabinet space, wiring, and failure points.
Proprietary damping: low vibration, low noise, fast settling.
Flexible I/O: direct sensor and actuator connection.
Scalable networking: up to 99 axes for modular expansion.
Familiar software: short learning curve for rapid deployment.
Global power compatibility: supports worldwide facilities.

Industrial protection: stable operation in harsh environments.

  • ENOTEC OXITEC 5000 SME-53310000 InSitu O2 Gas Analyzer System
  • TRICONEX 3723X 32-Channel TMR Analog Input Module with HART for Tricon CX
  • GE 151X1233DB02SA02 Rev A Pitch Converter 30 Nm DC Pitch Conversion Module
  • GE 151X1207CK02SA02 77MM DE Excitation Module for Mark VI Turbine Control Systems
  • HIMA H6200A Analogue Isolator Power Supply for HIMax Safety Systems
  • ABB SACO 64D4 Digital Annunciator Unit with 64 Alarm Channels
  • Allen-Bradley 5069-L306ER - SER A CompactLogix Controller PLC
  • Omron CJ1W-CORT21 - CANopen Master Unit PLC Module
  • Danfoss 131B9523 / FC-102P5K5T4E20H1 - 5.5kW VLT HVAC Drive Inverter
  • Schneider Electric LXM32MU90M2 - Lexium 32 Servo Drive Controller
  • Danfoss AKD102P15KT4P21H1 - 15kW 131L2413 ADAP-KOOL Drive Inverter
  • Kollmorgen S70602-NANANA - Servo Drive Controller
  • Allen-Bradley 6189-PS2 - Power Supply Industrial Computer PS
  • Beijer E900T / 03010F - Operator Panel IFC ETTP HMI
  • Schneider Electric LMC20 - PacDrive Motion Controller PLC
  • Sartorius CAW2S1-3DC-NCE - COMBICS 2 Industrial Scale Terminal
  • Kollmorgen / Danaher S30301-NA / S300 - SERVOSTAR343 Servo Drive Controller
  • Siemens A5E00159503 - 12 INCH TFT Touch Panel HMI
  • Siemens 3UF5021-3AB00-1 - SIMOCODE DP Basic Unit Control Module
  • Danfoss 131B8872 / FC-202PK37T4E20H1 - 0.37kW VLT AQUA Drive Inverter
  • Atlas Copco ICB421-2003D / VSK001001 - W9139 ICM431-0025C ICM431-0025D Controller
  • Lenze EV82EV751_4C - Version 4A39 Frequency Inverter Drive
  • Atlas Copco / ABB 3HAB8101-19/07B - Robot Cable Assembly Harness
  • Beijer X2 Pro7-B2 - Operator Panel HMI Touch Screen
  • Honeywell CDW45L - Damper Actuator
  • B&R X67DM9331.L12 - Rev. I0 Digital Mixed Module
  • B&R X67DM9331.L12 - Rev. H0 Digital Mixed Module
  • Sanyo Denki PMM-BA-5604-1 - Pentasyn Stepper Motor Driver
  • SICK AWS1-113 / 1008900 - Evaluation Unit
  • Siemens 1TF6064-1AF71-3AH1 - SIMOTICS Synchronous Servo Motor
  • Heidenhain ERN680.P003-4096 / 29416004 - Rotary Encoder
  • Schneider Electric LC1G185EHEA - TeSys Control Contactor
  • Parker SBC HPD5N - High Performance Drive Electronics SPA
  • Advantech UNO-2170-CE11BE - Embedded Automation Computer IPC
  • Siemens 6AG1231-4HF32-4XB0 - SIPLUS S7-1200 SM 1231 Analog Input Module
  • Advantech UNO-2170-BTO - Embedded Automation Computer IPC
  • Jumo SR-96/4-001.0.0.00.111 - Solid State Relay Power Controller
  • Pepperl+Fuchs FC-21-V - FC-20P Safety Barrier Module
  • Emerson SP1404 - Unidrive AC Drive Inverter
  • B&R X67AI1233 - Rev.C0 Analog Input Module
  • Mitsubishi FR-F740-00250-EC - Frequency Inverter AC Drive
  • Allen-Bradley 2711P-T7C21D8S - PANELVIEW PLUS 7 SERIES B Touch Screen HMI
  • Pilz PMCprotego D.03/000/0/0/2/208-480VAC / 8176101 - Servo Amplifier Drive
  • Reliance Electric 57C414 / 57414-1N - Modbus Interface Module
  • Mitsubishi FR-F740-00250-EC - Frequency Inverter AC Drive
  • Siemens 6SN1123-1AA00-0EA2 - Version A 160A SIMODRIVE Power Module
  • Siemens 1TF6064-1AF71-3AH1 - SIMOTICS Synchronous Servo Motor
  • AEG ALU202 / DAP216 / DEP216 / DAU202 - SIM216 SIM203 DNP205 ADU205 PLC Controller KIT
  • Atlas Copco / ABB 3HAB8101-19/07B - Robot Cable Assembly Harness
  • Hitachi CPU22-02HB - Micro-EHV Programmable Controller PLC
  • Parker SBC HPD5N - High Performance Drive Electronics SPA
  • Jetter JX3-THI2-RTD - JX3-BP Temperature Input Module
  • Eaton DC1-34014FB-A20N - 5.5kW Inverter Variable Frequency Drive
  • Eaton DS7-34DSX041N0-D - Soft Starter
  • Reliance Electric 57C422B / 57422-2E - 2-Axis Servo Controller
  • Hitachi CPU22-02HB - Micro-EHV Programmable Controller PLC
  • Eaton DC1-34014FB-A20N - 5.5kW Frequency Inverter Variable Frequency Drive
  • Siemens 6SN1123-1AA00-0EA2 - Version A 160A SIMODRIVE Power Module
  • Reliance Electric 57C414 / 57414-1N - Modbus Interface Module
  • Eaton DS7-34DSX041N0-D - Soft Starter
  • Reliance Electric 57C422B / 57422-2E - 2-Axis Servo Controller
  • Johnson Controls DX-9120-8454 - Digital Controller
  • Jetter JX3-THI2-RTD - JX3-BP Temperature Input Module
  • Siemens 6SL3210-1KE21-7AP1 - SINAMICS G120C DP 7.5kW BOP-2 Inverter Drive
  • Siemens 1FK7042-2AF21-1QG0 - SIMOTICS S Synchronous Servo Motor
  • Mettler Toledo IND570 - Harsh Analog Weighing Terminal Controller
  • Schneider Electric TM238LDA24DR - Modicon M238 Programmable Logic Controller PLC
  • Hitachi EH-CPU548 - EH-150 PLC CPU Module
  • Honeywell Q7750A2003 - Excel 10 Zone Controller
  • Ferag 584.002.V003 - Control Panel HMI
  • Danfoss AK-SM 720 / 080Z8511 - ADAP-KOOL System Manager Controller
  • Ferag 584.002.V003 - Control Panel HMI
  • Kern 3210001.001 / LOP-KS 2903440.001 - PRT.205A.0000.V001.02341 Servo Controller Board
  • Reliance Electric 57C424 - Maxpak III High Speed Link Module
  • Telemecanique XBTA70101PA - Compact Terminal HMI Panel
  • Reliance Electric 57C424 - Maxpak III High Speed Link Module
  • Reliance Electric 57C422B - 2-Axis Servo Controller
  • Honeywell Q7750A2003 - Excel 10 Zone Controller
  • Telemecanique XBTN400 - Magelis Small Panel HMI
  • Schneider Electric TM172PDG42S - Modicon Programmable Logic Controller PLC
  • Fanuc HE693THM884M - Thermocouple Input Module
  • Selectron PMC22BAEZD / 220735 - Selecontrol PMC 22 ABEZD Controller Module
  • Baumuller BUS21-22/45-31-020 - Servo Drive Inverter
  • Schneider Electric TM172PDG42S - Modicon Programmable Logic Controller PLC
  • Schneider Electric ATV32HD11N4 - Altivar Variable Frequency Drive Inverter
  • Lenze 494_E.4B - DC Speed Controller
  • NORD SK300E-111-340-B - SKDA130E-111-340-IBS-AAA Frequency Inverter
  • Reliance Electric GMI-S02 - AC/AC Converter 380/400V 50/60Hz 2.3/2.8A Drive
  • Hakko / Monitouch V710CD - Operator Panel HMI Touch Screen
  • B&R 5PC910.SX01-00 / 5YZCAA00700000-005 - Automation PC Industrial Computer
  • Hitachi EH-CPU548 - EH-150 PLC CPU Module
  • Tecnau / Fortec FORTEC-04/UL / 10117 - PCB Circuit Board
  • Bosch PSS 2037 10B - Power Supply Module
  • Newall B602000 - Digital Readout Scale
  • ELCON PC Controller - Industrial PC Controller
  • Siemens 3UF5100-0AB00 - SIMOCODE-DP Control Module
  • Omron NS8-TV00B-V2 - Touch Screen HMI Panel
  • Siemens 6ES5264-8MA12 / IP264 - CAM Controller Module
  • Allen-Bradley 1756-L72S - SER B GuardLogix Safety Controller
  • Schneider Electric SXWMPC15A10001 - SmartX Controller Automation Server
  • Telemecanique LC1F265F7 - TeSys F Contactor
  • Siemens 6ES7314-6CH04-0AB0 - SIMATIC S7-300 CPU 314C-2 DP PLC
  • Allen-Bradley 1734-EI4S - POINT I/O Safety Module
  • Allen-Bradley 2711P-T7C4D8 / 2711P-RP8D - PanelView Plus HMI Touch Screen Logic Module
  • Ropex UPT-640-V - Resistron Temperature Controller
  • KEB 07.F5.B3A-0A00 - VERSION 1.1 Combivert Frequency Inverter
  • Sensopart V50-OB-A3-IW-M2-L - VISOR Vision Sensor Camera
  • SICK AFM60A-S1NB018X12 / 1059040 - Absolute Rotary Encoder
  • Kern AG KMC600 / 2903436.001 - Servo Drive Controller
  • Lenze E82EV302_4C200 / 13015655 - VERSION 3D35 Frequency Inverter Drive
  • Schneider Electric XBTOT2210 - Magelis Touch Screen HMI Panel
  • Baumuller BM5-O-SAF-000-000-000-001-202 - Parameter Safety Module
  • SICK UE4470-22EE690 - Safety Relay Controller
  • Hitachi EH-CPU448 / EH-150 - PLC CPU Module
  • Rexroth VT5005-13 - R5 00010592 Proportional Valve Amplifier Board
  • Siemens 6ES7510-1DJ00-0AB0 - SIMATIC ET 200SP CPU PLC
  • Beckhoff CX5120-0121 - 2GB Embedded PC Controller
  • Priva BlueiD S10 / 5010002 - SN3t 5020004 5010101 Building Automation Controller
  • Sigmatek DM161 - S-DIAS Digital Mix I/O Module
  • Telemecanique LC3D50P7A64 - Star Delta Starter Contactor
  • Siemens 6SN1123-1AA00-0BA2 - SIMODRIVE 611 Power Module
  • Siemens 6SN1124-1AA00-0CA1 - SIMODRIVE 611 Power Module
  • Dixell XC1015D-1C01F / XC1000D - Compressor Controller
  • Siemens A5E02184619 / 19T 577B - Industrial Touch Screen HMI Panel
  • Siemens 6SE6420-2AD27-5CA1 - Filter 6SE6400-2FS03-8CD0 Micromaster Inverter
  • Schneider Electric LC1G400LSEN - TeSys Control Contactor
  • Baldor BPS10-200-20-P - Servo Drive Motor Controller
  • Ingersoll Rand X4I / Y06IR03.00 - Air Compressor Controller