MTS Temposonics ® R-Series magnetostrictive absolute non-contact displacement sensor

MTS Temposonics ®  R-Series magnetostrictive absolute non-contact displacement sensor

Core technical principles

Magnetostriction effect:

The core components are waveguide wires and external permanent magnets

The current pulse generates a magnetic field in the waveguide wire, which interacts with the magnetic field of the magnet to generate stress pulses

The stress pulse propagates at a constant speed of about 2780m/s, and the absolute position is calculated by the time difference

Features: Non contact, wear free, absolute measurement, read immediately upon power on, zero free return

Product Structure Series (5 Major Categories)

Model Structure Type Range Protection Typical Applications

RP profile type 50-5000mm IP65 external universal mechanical

RH pole type (pressure resistant) 50-7600mm IP67 hydraulic cylinder built-in

RF flexible rod 100-20000mm IP30 (IP65 after assembly) long stroke, curved installation

RD4 Compact Rod 25-5000mm IP67 Narrow Space Hydraulic Cylinder

RS all stainless steel 50-7600mm IP68/IP69K high voltage, flushing, corrosive environment

Electrical output interface

Analog quantity

Signal: 0-10V, -10-+10V, 4-20mA

Resolution: 1 μ m, linearity * * ≤ 0.01% FS**

Support: Dual magnet, position+speed output

SSI

Synchronous serial interface, binary/Gray code

Resolution of 0.5 μ m, supports synchronous/asynchronous modes

CANbus

Supports CANopen and CANbasic

Up to 20 magnets can be measured simultaneously

Profibus-DP

Baud rate 12Mbps, slave device

Up to 20 magnets

EtherCAT

100Mbps， Distributed clock

Up to 20 magnets, supporting position and speed

Profinet

Industrial Ethernet, RT real-time

Up to 19 magnets

Key performance indicators

Range: 25mm~20000mm (RF series)

Resolution: up to 0.5 μ m

Linearity: ≤± 0.01% FS

Repetition accuracy: ≤± 0.001% FS

Response time: 0.5ms~5ms (varying with range)

Working temperature: -40 ℃~+75 ℃

Protection level: RP=IP65; RH=IP67； RS=IP68/IP69K

Pressure resistance: hydraulic rod type 350bar, peak value 700bar

Power supply: 24VDC (-15%/+20%)

Impact resistance: 100g; Vibration resistance: 15g/10~2000Hz

Installation and maintenance highlights

RH/RD4 built-in oil cylinder: The sensor core can be replaced separately without breaking the oil pressure

Magnet without power supply, non-contact induction, no wear and tear

Support on-site programming: zero point, range, direction, and filtering adjustable

Dual magnet/multi magnet synchronous measurement

Can be equipped with a floating ball to achieve liquid level/interface measurement

Accessories and Certification

magnet assembly 

Circular, U-shaped, slider, floating ball

Working temperature: -40 ℃~+100 ℃

programming tools

Handheld programmer, cabinet programmer, USB programmer

Bus Address Setting Tool (Profibus/CANopen)

Authoritative Certification

ISO9001、CE、UL

ATEX/IECEx/UL explosion-proof certification (Zone 2/22)

Typical applications

Hydraulic servo cylinder, injection molding machine, die-casting machine

Metallurgical equipment, woodworking machinery, packaging machinery

Liquid level measurement, interface measurement (double float)

Explosion proof occasions (gas/dust)