ABB REF542plus Feedline protection and measurement unit

ABB REF542plus Feedline protection and measurement unit

Please read this manual carefully before using REF542plus for operation.

This manual describes how to use the interface of REF542plus (LD HMI, local detachable human-machine interface). Attention: This manual

The views and images related to HMI included in are only used as examples.

If you are not authorized or unfamiliar with REF542plus and its operating tools, do not be unfamiliar with REF542plus

Make any changes to the configuration. Changing its configuration may cause malfunctions and render it ineligible for warranty.

1.2. Symbol usage

This article includes the following icons, which are used to indicate safety related conditions or important information:

Electrical warning icons are used to indicate the presence of hazardous factors that can cause electric shock.

Warning icons are used to indicate the presence of hazardous factors that may cause personal injury.

The attention icon is used to indicate important information or warnings related to the concepts discussed in the text. It will indicate the existence of that

There is a danger that may cause software paralysis or damage to equipment or property.

Manual Title

Item identification

Application Notes

1MRS755870

CAN Manual

1VTA100189-Rev 1, en

Configuration Guide

1YZA000053-cn

iButton Programmer User Manual

1MRS755863

Manual Part 3,Installation and Commission

1VTA100004

Manual Part 4,Communication

1VTA100005

Motor Protection with ATEX Certification,Manual

1MRS755862

Operation Manual

1YZA000052-cn

Protection Function Manual

1YZA000051-cn

Technical Catalogue

1MRS755859

Technical Reference Modbus RTU

1MRS755868

Web Manual, Installation

1MRS755865

Web Manual, Operation

1MRS755864

1.5. File version

File version

product version

date

Revision history

1VTA100172-Rev1.en

2002.11.01

First release

1VTA100172-Rev2.en

2003.10.22

Upgrade to version 4D02

1VTA100172-Rev 3.en

2004.05.03

upgrade

1VTA100172-Rev 4.en

2005.04.04

upgrade

1MRS755869, Version A

2006.02.28

File upgrade

. Language

·Typesetting

1MRS755869, Version B

two point five

2006.09.30

Upgrade to software version V4E03a

1YZA000052 cn, version B

two point five

2007.01.31

This version is 1MRS755869

Chinese translation version of version B

LED strip: These three LED strips can be used to display the load status of the switch device obtained by quickly checking REF542plus

The most relevant information. They are labeled as M1, M2, and M3 respectively. Each of them consists of 12 LED lights, 10 of which are green, and 2

One is red. Under normal circumstances, 10 green LED lights are specifically used to display 0% -100% of the measured rated value of the configuration. to

Yes, each LED light corresponds to 10% of the rated value. Two red LED lights display a 20% overload status. These LED strips

The displayed measurement values can be set using operating tools.

Indicator LED: 8 freely programmable three color LED lights are available for display. These LED lights are distributed on 4 pages. Therefore, overall

32 indicator options, programmable for corresponding protection, control, monitoring, and switch input related time and status.

LED lights can be assigned to specific conditions using operating tools.

Infrared (lrDa) interface: This is an infrared serial interface that can be used to connect REF542plus to a personal computer. Use in combination

Suitable cables and operating tools can be used for the following operations:

Download the configuration to the unit.

·Upload the current configuration from the unit.

·After a malfunction occurs, upload the fault recording data. Only after pre enabling fault recording with the operating tool, can it proceed

Perform this operation.

Upload other information (measurement values, switch input status, switch output status).

Do not make any changes to the configuration of REF542plus unless you are familiar with REF542plus and its operating tools.

Changing its configuration may result in malfunctions and loss of warranty eligibility.

function. When the device is in operation, the green LED is turned on. When there is no auxiliary power supply or the equipment is not running (FUPLA is not available)

When running, the LED will turn off.

Communication malfunction. The display of this LED is only meaningful when the REF542plus is equipped with a communication module. When a communication module is detected,

The LED turns green when turned on. If there is no or no communication module detected, the LED will display in red. Installed Modbus communication

When the communication error rate increases after the signal module, the LED turns orange. When the communication error rate causes poor communication, it turns red.

When no communication error occurs or the module status register (see Modbus Technical Reference) is reset, the LED turns back green

Color. When the communication module is not present, the LED remains off.

·Alarm: When the user-defined alarm is valid, the LED turns red. Several alarm bars can be defined and configured using operation tools

Item. Alarm conditions can include tripping of protective functions, loss of SFs in circuit breakers, and so on. When the LED is turned on, it cannot be turned off

Close the circuit breaker or download a new configuration. Firstly, the alarm must be confirmed.

Interlock error: LED usually displays green. If the user attempts to perform an operation that violates the interlocking conditions, the LED will temporarily change to

red For example, operating the isolation switch when the circuit breaker is in the closed position.