Yokogawa AIP830 Single Circuit Operation Keyboard

Yokogawa AIP830 Single Circuit Operation Keyboard

Overall hardware specifications

Product positioning: DCS operator station dedicated tablet industrial keyboard, used for process control and factory monitoring operations.

USB port

Two A-type USB interfaces, both USB cables must be directly connected to the computer and cannot be switched to a hub.

Keyboard function: USB 2.0 full speed, bus power supply;

Audio speaker: USB 1.1 full speed, bus powered.

Electrical parameters

Input: 5V ± 5%, powered by the USB port of the PC;

Maximum consumption current: 1A;

weight

The installation position and structure of VESA bracket must be able to withstand a load of at least 10 kg.

Without VESA bracket: approximately 2.0 kg;

With VESA bracket: approximately 2.5 kg;

Shell color: Black (equivalent to Munsell color N1.5).

Safety level: IEC 61010-1, installation category Class I, equipment not directly connected to the main power supply.

environmental conditions

Normal operating temperature: 5 ° C to 40 ° C;

Storage/transportation temperature: -20 ° C to -60 ° C;

Humidity: 20-80% RH, no condensation.

System level installation and environmental conditions refer to document GS   33J01A10-01EN 'System Overview'.

Keyboard key layout and function

The keyboard includes alphanumeric keys, dedicated operation keys, window call keys, and 64 user-defined function keys for process control and factory monitoring. Main button partition:

Mode selection switch: Choose whether to configure this hardware switch based on the suffix code.

64 user-defined function key areas: process operation, monitoring shortcut keys.

Operation confirmation button: There are two icon styles, Type-A and Type-B, selected by the model suffix.

Data input button, page flipping button; The Page key, combined with the Fn key, serves as a volume control.

Window call key, container window key.

Number keypad area.

Cursor movement key: Use the Fn key as a scroll key.

Alarm confirmation button, buzzer reset button.

Clear screen button: By default, Fn combination is required to trigger, which can be changed to take effect directly through hardware settings.

Fn function combination key: realizes secondary functions such as volume, scrolling, and screen clearing.

Built in speaker: USB audio output; Built in electronic buzzer, used for alarm beep notification.

POWER power indicator light.

Appearance and installation dimensions (unit: mm)

Keyboard body

Total width: 500   mm; Total height: 225   mm; Thickness: 17   mm; Cable length: 2300 ± 100   mm; Cable output can be deflected by 7 °.

VESA mounting bracket

VESA hole position is compatible with standards and fixed with 8 M4 × L10 screws; The drawing provides all positioning dimensions.

tolerance standard

0.5~120   mm: ± 0.8   mm; Combination size ± 1.5   mm;

120   mm follows the JEM   1459 industrial standard.

Model suffix and option code

Example of complete model format: AIP830-111/VESA/EIM

Encoding meaning

AIP830 basic model, single circuit operation keyboard

1st suffix: 0 No mode selection switch

First suffix: 1 with mode selection switch

Second suffix: 0 operation confirmation button Type-A

Second suffix: 1. Operation confirmation button Type-B

3rd suffix: 1 fixed position, always 1

Option/VESA comes with VESA mounting bracket

Options/EIM English manual

Options/JIM Japanese Manual

Compliance Certification Instructions

Safety, EMC：CE、CSA、RCM、KC、EAC、 Moroccan C م mark.

Important note: AIP830 itself does not obtain complete certification separately; The overall compliance depends on whether the connected PC host has the corresponding certification mark. The EN 61000-3-2 and EN 61000-3-3 standards in CE certification are not applicable to this product.