ADLINK MXE-1300 series industrial fanless industrial control computer

ADLINK MXE-1300 series industrial fanless industrial control computer

Basic Information

ADLINK Linghua MXE-1300 series embedded fanless computer product specification book introduces the hardware configuration, interfaces, environmental parameters, optional accessories, and industry applications of MXE-1301 and MXE-1302S models. The product is based on the Intel Atom low-power platform and focuses on heavy-duty industrial scenarios with wide temperature, multiple network ports, and multiple serial ports.

Product positioning and core advantages

MXE-1300 is a Matrix series rugged fanless industrial control host that relies on all aluminum passive heat dissipation, wide voltage power supply, and rich industrial I/O to adapt to harsh working conditions such as factory automation, intelligent transportation, mobile monitoring, environmental monitoring, SCADA configuration, etc; Built in mini PCIe+USIM slot, native support for 3G/WiFi/GPS wireless expansion, triple gigabit network ports to meet multi network segment isolation and gateway forwarding requirements.

Core hardware differences between two models

Parameter item MXE-1301 MXE-1302S

CPU Intel Atom D2550 1.86GHz Intel Atom N2600 1.6GHz

2GB DDR3 1066MHz standard memory, up to 4GB 2GB DDR3 800MHz, up to 4GB

Chipset Intel NM10 Intel NM10

Complete hardware specifications for the entire machine

1. Display output

Dual independent display: VGA+DVI-D, supports a maximum resolution of 1920 × 1200, and can be expanded for dual screen display.

2. Communication interface (the whole machine has 4 serial ports, 3 Gigabit Ethernet ports, and 6 USB 2.0 ports)

Serial port (4-channel DB9)

COM1, COM2: Software switchable RS232/422/485, dedicated for industrial buses;

COM3, COM4: Fixed standard RS232, used for debugging peripherals;

Ethernet (3 x Intel 82574L Gigabit Ethernet card)

The front and rear panels are divided into 2 network ports and 1 network port, supporting multi network segment isolation, soft routing, industrial gateway, and machine vision multi camera acquisition;

USB 2.0, 6 in total

There are 4 ports on the front panel and 2 ports on the back panel, which can be connected to external devices such as collectors, USB drives, and barcode scanners;

Digital IO (4DI+4DO)

Backboard green terminal interface, used for sensor input and relay output control;

Audio

Front microphone input, line output, supports voice broadcasting and on-site recording.

3. Storage solution (compatible with multiple storage media)

Onboard SATA-II interface: capable of installing 2.5-inch mechanical hard drives/solid-state drives;

External Type I CF card slot: supports PIO/DMA high-speed read and write, suitable for small fixed system;

Internal expansion: 1 mini PCIe slot+matching USIM card slot, can be equipped with 3G/4G/WiFi/BT/GPS/video capture card/SAM security encryption module.

4. System Function Hardware

Hardware watchdog WDT: Automatic hardware reset when the system freezes, essential for unmanned devices;

Status indicator lights: WDT running light, hard disk read-write light, whole machine diagnostic indicator light;

Physical buttons: power button, reset button;

Antenna lead out hole: Suitable for external antennas of wireless modules.

5. Power supply system

DC wide voltage input: 6~36VDC universal for vehicle/industrial DC;

Optional 90W AC to DC external power adapter.

6. Mechanical dimensions and installation

Dimensions: 210 (W) × 170 (D) × 53 (H) mm;

Whole machine weight: 1.8kg;

Installation method: Standard VESA 100 wall mounting kit.

Environmental and reliability industrial grade

1. Temperature range

Standard operating conditions: 0 ℃~50 ℃ (with regular hard drive);

Extended wide temperature range (optional screening service+industrial SSD/CF card): -20 ℃~70 ℃;

Storage temperature: -40 ℃~85 ℃ (excluding hard drives, solid-state drives, and CF media).

2. Vibration/impact tolerance

Running with SSD/CF: 5Grms three-axis vibration, 100G half sine impact;

Running with mechanical hard drive: 0.5Grms three-axis vibration;

3. Electromagnetic and Protection

ESD static electricity: Contact ± 4KV, air ± 8KV;

EMC certification CE, FCC Class A industrial grade.

4. Humidity

Maximum relative humidity of 95% at 40 ℃, no condensation environment.

Software operating system support

Windows 7 32-bit/Windows Embedded 7;

Windows XP/XP Embedded (with functional limitations, please refer to the official website for instructions).

Optional upgrade accessory list

Memory upgrade: 4GB DDR3 memory;

Storage options:

500GB commercial 2.5-inch mechanical hard drive (0-60 ℃);

32GB MLC SATA solid-state (0~70 ℃);

8GB SLC industrial grade wide temperature solid-state (-40~85 ℃);

Power supply: 90W commercial AC-DC adapter;

Wide temperature whole machine screening service: The whole machine supports operation at -20~70 ℃.

Applicable industry scenarios

Factory automation production line, intelligent vehicle transportation equipment, mobile video surveillance, building facility management, environmental data acquisition, SCADA industrial monitoring, CIM computer integrated manufacturing system.

Layout Description of Front and Rear Panel Interfaces

Front panel: CF card slot, VGA, DVI, 4xUSB2.0, dual gigabit Ethernet ports, power/reset button, status LED, microphone/audio interface;

Backboard: 1 remaining gigabit Ethernet port, 4 DB9 serial ports, 4DI+4DO terminals, 6-36V DC power supply terminals, dual antenna openings.