ASEM HT2150 Fanless Industrial Panel X86

ASEM HT2150 Fanless Industrial Panel X86

Basic version configuration

Model Basic Configuration Power Consumption

HT2150/SL BASIC 6.5-inch screen, 5-wire resistive touch screen, aluminum front panel; Onboard Celeron J1900; 2GB DDR3 memory; Non expandable communication interface; 24V isolated DC power supply; Pre installed UBIQUITY BASIC Win32/64 runtime; 12-month warranty of 23W

HT2150/S0 BASIC, the rest are the same as SL version; Support installation of extended communication interface 23W

Power consumption description: The configured power consumption is the sum of the maximum power consumption of each component, excluding the power consumption of external USB devices.

Core hardware platform

Processor: Intel Celeron J1900, board soldering is non replaceable; 4-core 4-thread, basic 2.00 GHz, burst 2.42 GHz, L2 cache 2MB.

Graphics card: Intel HD Graphics (688MHz), LVDS digital interface; The maximum shared video memory is 1720MB.

Memory: Single SODIMM DDR3-1600 slot; Optional 1GB, 2GB (default), 4GB, 8GB.

storage

Onboard mSATA SSD (SATA II 3Gb/s) connector;

CFast SATA II bootable slot, externally accessible.

Power supply

Standard: 24V isolated DC power supply, input 18-32 VDC; Optional ATX mode power on/off button;

Optional built-in UPS uninterruptible power supply module (excluding battery kit); The UPS battery kit is a wall mounted external 12V lead-acid battery; 2500mAh， Charging at 25 ℃ for 3 hours, with a 5A load endurance of 15 minutes, and a nominal lifespan of 10 years.

Front panel protection: aluminum panel, front IP66 protection; The touch screen defaults to a 5-wire resistive screen and can be replaced with a regular glass panel.

Display and Touch Screen Selection (Multiple Sizes Available)

All come standard with a 5-wire resistive touch screen and onboard controller. The parameters and power consumption increments are as follows:

Screen size specification parameters, power consumption increment (W)

6.5 "4:3 TFT 640 × 480 VGA, 800cd/m ² reference

7 "widescreen 15:9 800 × 480 WVGA, 500cd/m ²+1

8.4" 4:3 800×600 SVGA，400cd/m² -1

10.1 "widescreen 16:10 1280 × 800 WXGA, 400cd/m ²+0

10.4" 4:3 800×600 SVGA，400cd/m² +2

12.1" 4:3 SVGA 800×600，450cd/m² +4

12.1" 4:3 XGA 1024×768，600cd/m² +12

12.1 "widescreen 16:10 1280 × 800 WXGA, 400cd/m ²+8

15" 4:3 XGA 1024×768，500cd/m² +14

15.6 "widescreen 16:9 1366 × 768 HD, 400cd/m ²+9

Each screen is labeled with typical viewing angles for left, right, and up and down.

Interface and expansion options (only S0 version supports communication expansion, SL does not have expansion capability)

Note that the options marked with note 3 cannot be mixed and installed simultaneously.

1. Onboard standard interface

Front end: 1 × USB 2.0;

Rear: 2 x Gigabit Ethernet (Intel I210), 1 x USB 3.0, 1 x USB 2.0, CFast slot, reset button, power supply, UPS terminal, grounding terminal;

The S0 model is equipped with an additional ADD-ON I/F expansion slot, which supports the installation of communication options.

2. Expansion options and power consumption

Option description Power consumption increment (W)

MSATA SSD onboard mSATA MLC solid state drive 2

CFast CFast SATA storage media 1

Serial port 1 1 RS232/422/485 (DB15M)+USB2.0 1

Serial port 2 isolated type 1-channel RS232/422/485 (DB15M)+USB2.0 1

Serial port 3 2 RS232 DB9M 2

USB Expansion 1 x USB 2.0/2 x USB 2.0

Network port expansion 1 x Gigabit Intel I210+USB2.0 1

Fieldbus NETcore X card (60pin-L) 3

Wireless module WiFi (a/b/g/n 2.4G/5G)+3G/4G LTE module 7

ATX power kit ATX power button, internal cable, remote control connector 0

UPS battery kit wall mounted external battery pack 15

Operating system support

ASEM certification system: Win10 IoT Enterprise LTSC2019/2016、Win8.1 Industry Pro、Win7 Pro/Ultimate、Win7 Embedded Standard、Linux。   

The platform is compatible but ASEM is not certified: VxWorks, QNX, compatibility needs to be verified by oneself.   

Not supported: Windows XP/2000/98/NT, WinCE5/6.

Randomly include UBIQUITY BASIC Win32/64 runtime for remote assistance.

Environment, Certification, and Quality Assurance

Environmental conditions: working temperature from 0 ℃ to+50 ℃; Storage -20 ℃~+60 ℃; The maximum humidity is 80% without condensation.

Certification: CE (EMC, Safety Standards); CULus LISTED UL61010 (to be completed).

Warranty: Standard 12 months; It can be extended for a fee of 18/24/36 months.

Mechanical dimensions

Panel installation model, providing the overall appearance A × B, hole size C × D, border E, depth, and weight (weight tbd) corresponding to each screen;

The thickness of the SL version is 39mm; the thickness of the S0 version is 55mm;

Provide schematic diagrams of backplane interfaces for both SL and S0 versions, with S0 version featuring expansion I/F slots.

Important remarks

The touch screen can be replaced with a regular front glass;

The UPS module is only supported by Microsoft Windows system;

The communication extension options marked in Note 3 are mutually exclusive and cannot be assembled simultaneously.

Product positioning

HT2150 is a panel type fanless industrial computer (industrial tablet) designed for industrial automation scenarios; The S0 version can flexibly expand serial ports, buses, and wireless communication; SL version simplifies without extensions; Supports wide voltage DC power supply, IP66 front panel, suitable for harsh industrial environments.