GE IC697MDL340 120 VAC Output, 2 Amp (16 Points)
• Intel®’s Ultra Low Voltage Celeron® 400 MHz/650 MHz processor
• Special features for embedded applications include:
— Up to 1 GB bootable Flash on secondary IDE (optional)
— Two 16-bit and two 32-bit programmable timers
— 32 KB of nonvolatile SRAM
— Software-selectable Watchdog timer with reset
— Remote Ethernet booting
— One PMC expansion site (IEEE-1386.1 PCI mezzanine card standard,5 V)
— VME64 modes supported: A32/A24/D32/D16/D08(EO)/MBLT64/BLT32
— VMEbus interrupt handler, interrupter, and system controller
— Includes real-time endian conversion hardware for little-endian and
big-endian data interfacing (patent no. 6,032,212)
— Enhanced bus error handling
— Passive heat sink
— Real-time clock and miniature speaker included
— Dual front panel universal serial bus (USB) connections
• Standard features include:
— Up to 512 MB PC100 SDRAM
— 100 MHz system bus via Intel 815E chipset
— Dual Ethernet controllers supporting 10BaseT and 100BaseTX
interfaces
— Ultra DMA/100 hard drive and floppy drive controllers (uses VMEbus P2
for connection to IDE/floppy)
— Two high performance 16550-compatible serial ports
— PS/2-style keyboard and mouse ports on front panel
— VMEbus backplane interface
— User programmable Watchdog timer
— Passive processor heat sink
MICROPROCESSOR — The VMIVME-7700 is
based on the Intel Ultra Low Voltage Celeron processor.
The enhanced Celeron processor has 256 KB of on-die L2
cache. The µFCBGA package processors offer thermal
characteristics that are well suited for embedded systems
operating over a wide range of temperatures.
DRAM MEMORY — The VMIVME-7700 accepts
one 144-pin SODIMM PC100 module for a maximum
memory configuration of 512 MB.
BIOS — The VMIVME-7700 System BIOS and video
BIOS are provided in reprogrammable memory.
VIDEO GRAPHIC CONTROLLER — High
resolution graphics and multimedia-quality video are
supported on the VMIVME-7700 by an internal 815E AGP
graphics controller. A fully functional, integrated 2D/3D
graphics accelerator provides pixel processing and
rendering, with display resolutions of up to 1600 x 1200
supported. The video output is provided through the front
panel.
CompactFlash — The VMIVME-7700 includes a
CompactFlash socket on the assembly. The CompactFlash
may be configured as the boot device through the BIOS boot
device set up. The CompactFlash, as an ordering option, is
available up to 1 GB of storage space.
IDE Interface — The VMIVME-7700 provides an
IDE interface for hard disk drive support. The IDE interface
allows support of several types of data transfers:
Programmed I/O(PIO), 8237 style DMA, Ultra ATA/33,
Ultra ATA/66 and Ultra ATA/100.
ETHERNET CONTROLLER — The
VMIVME-7700 provides two front panel connections to
either 10BaseT or 100BaseTX LAN using two Intel
82551ER Ethernet controllers. Standard RJ45 connectors

are provided on the front panel with two network status
indicators.
REMOTE ETHERNET BOOTING — The
VMIVME-7700 utilizes an Expansion ROM BIOS which
enables processor booting from a network server. The facility
supports PXE and a variety of network boot protocols
including BOOTP and DHCP (TCP/IP).
UNIVERSAL SERIAL BUS (USB) — The
VMIVME-7700 provides front panel dual connection hub
host controllers for the USB. Supported USB features
include: isochronous data transfers, asynchronous
messaging, self-identification and configuration of
peripherals, and dynamic (hot) attachment.
SERIAL PORTS — The VMIVME-7700 provides two
16550-compatible serial ports. Each serial port has an
independent 16-byte FIFO supporting baud rates up to
115 kbaud. Connection for both serial ports is provided by