OMRON NS Series Programmable Terminal Web Interface User Manual

OMRON NS Series Programmable Terminal Web Interface User Manual

Operating environment (essential conditions)

Category requirements

Applicable PT models NS12-TS01-V2, NS10-TV01-V2, NS8-TV01-V2, NS5 series V2

System program version ≥ 8.0

Network 10Base-T/100Base TX Ethernet

Browser IE6/IE7

System language is not Japanese

NS Web Interface Core Features

Remote monitoring: Real time viewing of PT current screen by browser, not operable

Remote operation: view+mouse click to simulate PT touch, can call the system menu

Memory card file management: browsing file lists, viewing content, downloading CSV/BMP files

Parameter configuration: refresh interval, color, authentication, port and other settings

Connection and usage steps

PT end configuration

Power on and enter RUN mode, press the four corners of the touch screen to bring up the system menu

Enter the communication page: Enable Ethernet, Enable FTP/Web

Set IP/subnet mask, save and restart PT

Browser connection

Input http://PT The IP address/

Login: default username, default password

Enter the menu page and jump to the monitoring/operation/file/configuration page

Directly access the page URL

|Page | URL|

|Monitoring |/monitor. html|

|32768 color monitoring |/monitor 32k. html|

|256 color monitoring |/monitor 256. html|

|16 level grayscale |/monitor 16.html|

|Operation |/operability. html|

|Memory card |/memcard.exe|

|Configuration |/config.html|

|Menu |/menu.html|

Function interface details

Menu page: Unified entrance, jumping to four major functional pages

Monitoring Page

Auto refresh: default 15 seconds

Color: 32768/256 colors, 16 gray levels

Support displaying/hiding screenshot time

Operation page

Auto refresh: default 3 seconds

Click delay: default 1 second

PT local touch can be disabled to prevent conflicts

Support one click access to system menu

Memory card page

Root directory:/at0

Support viewing files, clicking preview, and right clicking download

Configuration Page

|Category | Key Settings | Default Values|

|Monitoring | Refresh interval, color, authentication, PNG compression | 15s, 256 colors, compression 3|

|Operation | Refresh interval, click delay, disable touch | 3s, 1s, do not disable|

|Service | Page Title, Initial Page, TCP Port | NS Web Interface, Menu, 80|

Apply: temporarily effective; Save: permanently saved; Default: Restore default

Fault and error handling

Solution to Error Information Causes

401 Authorization Required Account/Password Incorrect input default/default

403 Forbidden Memory Card Not Inserted/Damaged Check Memory Card

404 Not Found URL Error Check Address

Function unavailable System<8.0, FTP/Web closed, Japanese system update version, enable function, switch language

Key issues

What are the four hardware and system conditions that must be met to use NS Web Interface? 

Answer: ① The terminal is the NS series V2 model; ② System program version * * ≥ 8.0 * *; ③ Enable Ethernet and FTP/Web; ④ The system language is not Japanese.

What are the default refresh intervals for monitoring screens and operation screens? How to choose a more efficient color mode? 

Answer: The default monitoring time is 15 seconds, and the default operation time is 3 seconds; Choose 16 levels of grayscale for speed, 32768 colors for image quality, and fixed 32768 colors in PNG format.

How to prohibit on-site personnel from operating on PT and only allow remote control on the web? 

Answer: Go to the configuration page Operation Setting, check Disable Touch Panel, click save to disable local touch.