ABB PDD500A101 UN6000 control cabinet main processing unit
The listed standardsare valid at the time of the release of this document. Phasedout or replaced standards are removed from the list when needed.
Standards, EN ISO
The product is designed in accordance with the requirements of:
Description Standard
Safety of machinery - General principles for design - Risk assessment and risk reduction
EN ISO 12100:2010
Safety of machinery, safety related parts of control systems -
Part 1: General principles for design
EN ISO 13849-1:2015
Safety of machinery - Emergency stop - Principles for design EN ISO 13850:2015
Robots for industrial environments - Safety requirements -Part
1 Robot
EN ISO 10218-1:2011
Robots and robotic devices -- Coordinate systems and motion
nomenclatures
ISO 9787:2013
Manipulating industrial robots, performance criteria, and related
test methods
ISO 9283:1998
Classification of air cleanliness EN ISO 14644-1:2015i
Ergonomics of the thermal environment - Part 1 EN ISO 13732-1:2008
EMC, Generic emission EN 61000-6-4:2007 +
A1:2011
IEC 61000-6-4:2006 +
A1:2010
(option 129-1)
EMC, Generic immunity EN 61000-6-2:2005
IEC 61000-6-2:2005
Arc welding equipment - Part 1: Welding power sources EN IEC 60974-1:2012ii
Arc welding equipment - Part 10: EMC requirements EN IEC 60974-10:2014ii
Safety of machinery - Electrical equipment of machines - Part
1 General requirements
EN IEC 60204-1:2006
IEC 60529:1989 + A2:2013 Degrees of protection provided by enclosures (IP code)
Protection of electronic devices from electrostatic phenomena
- General requirements
IEC 61340-5-1:2010
i Only robots with protection Clean Room.
ii Only valid for arc welding robots. Replaces EN IEC 61000-6-4 for arc welding robots

European standards
Description Standard
Safety of machinery - Ergonomic design principles - Part 1:
Terminology and general principles
EN 614-1:2006 + A1:2009
Safety of machinery - Two-hand control devices - Functional
aspects - Principles for design
EN 574:1996 + A1:2008
Other standards
Description Standard
Safety requirements for industrial robots and robot systems ANSI/RIA R15.06
Safety standard for robots and robotic equipment ANSI/UL 1740
(option 429-1)
Industrial robots and robot Systems - General safety require ments
CAN/CSA Z 434-14
(option 429-1)
Protection of Electrical and Electronic Parts, Assemblies and
Equipment (Excluding Electrically Initiated Explosive Devices)