+086-15305925923

K-WANG

Service expert in industrial control field！

English 简体中文

NameDescriptionContent

Adequate Inventory, Timely Service

pursuit of excellence

Ship control system

Equipment control system

Power monitoring system

Current position:

Home >> ABB >> ABB TC630 AF100 coaxial modem

新闻动态

newS

Brand

ABB TC630 AF100 coaxial modem

Enclosure: Plastic, dimensions: 45 mm x 75 mm x 105 mm. Degree of

protection: IP 20

Mounting: Onto a standard mounting rail

Hardware settings:

• Six DIP switches for setting the node number. Allocated node

numbers: module 1 = 2 (default), module 2 = 3, module 3 = 4.

Maximum: 63

• One DIP switch for enabling/disabling digital input DI1 hardware

filtering. Default: filtering on

Connectors:

• Light transmitter and receiver (Hewlett-Packard Versatile Link) for

ACS 600 connection

• Two screw terminal blocks (Phoenix Contact MVBSTW 2,5/8-ST-

5,08) for digital I/O and power supply connections. Conductor crosssectional area: 0.5 to 2.5 mm2

Digital inputs 1 and 2:

• Voltage range: ±24 to 250 V d.c., 110 to 230 V a.c. ±10%

• Input current: 10 mA at 24 V d.c., 4 mA max. at 115/230 V a.c.

• Logical thresholds (d.c.): “1” > 12 V, “0” < 8 V

• Logical thresholds (a.c.): “1” > 40 V, “0” < 20 V

• Isolated from each other and the power supply.

Test voltage: 4 kV a.c., 1 minute

• Hardware filtering time: max. 10 ms

(Can be disabled for digital input 1)

Relay outputs 1 and 2:

• Max. voltage: 120 V d.c., 250 V a.c.

• Switching capacity: 8 A at 24 V d.c. (resistive load),

0.4 A at 120 V d.c. (resistive load), 2000 VA at 250 V a.c.

• Max. continuous current: 2 A RMS

• Contact material: Silver cadmium oxide (AgCdO)

• Contact protection: Varistor (250 V). With an inductive load, an

external protective component should be installed at the load end

• Isolated from each other and the power supply.

Test voltage: 4 kV a.c., 1 minute

General:

• Current consumption: 50 mA at 24 V d.c

• All materials are UL/CSA approved

• Fast transient burst immunity (IEC 801-4): 4 kV 5/50 ns

• Electromagnetic emissions: In accordance to EN 55022 B

Enclosure: Plastic, dimensions: 45 mm x 75 mm x 105 mm. Degree of

protection: IP 20

Mounting: Onto a standard mounting rail

Hardware settings:

• Six DIP switches for setting the node number. Allocated node

number: 5 (default). Maximum: 63

• One DIP switch for selection between bipolar mode (default) and

unipolar mode

• Four DIP switches for input signal type selection

Connectors:

• Light transmitter and receiver (Hewlett-Packard Versatile Link) for

ACS 600 connection

• Two screw terminal blocks (Phoenix Contact MVBSTW 2,5/8-ST-

5,08) for analogue I/O and power supply connections. Conductor

cross-sectional area: 0.5 to 2.5 mm2

Analogue inputs 1 and 2:

• Input signal types: ±0(4) to 20 mA, ±0(2) to 10 V, ±0 to 2 V

• Input impedance: 100 Ω (current), 200 kΩ (voltage)

• Resolution in unipolar mode: 0.024% (12 data bits)

• Resolution in bipolar mode: 0.048% (11 data bits + sign bit)

• Inaccuracy: ±0.5% (Full Scale Range) at 25 °C.

Temperature coefficient: ±100 ppm/°C max.

• Isolated from the power supply and from earth.

Test voltage: 1.5 kV a.c., 1 minute

• Common mode voltage: ±15 V

• Hardware filtering time: 2 ms approx.

Analogue outputs 1 and 2:

• Output signal type: 0(4) to 20 mA

• Maximum load resistance: 700 Ω

• Resolution: 0.024% (12 bits)