K-WANG

+086-15305925923

Service expert in industrial control field！

English 简体中文

NameDescriptionContent

Adequate Inventory, Timely Service

pursuit of excellence

Ship control system

Equipment control system

Power monitoring system

Current position:

Home >> ABB >> ABB TC820-1 Control I/O Unit

新闻动态

newS

Brand

ABB TC820-1 Control I/O Unit

Ambient Conditions,

Operation

Ambient operating conditions refer to the conditions the NTAC-02/

NDIO-02/NAIO-03 module is subjected to when installed for stationary

use.

Air Temperature: 0 to +50°C.

Relative Humidity: 5 to 95%, no condensation allowed. Maximum

allowed relative humidity is 60% in the presence of corrosive gases.

Contamination Levels:

Chemical gases: IEC 721-3-3, Class 3C2

Solid particles: IEC 721-3-3, Class 3S2

Installation Site Altitude: 0 to 2000 m above sea level. If the

installation site is higher than 2000 m above sea level, please contact

your local ABB distributor or office for further information.

Vibration: Max. 0.3 mm (2 to 9 Hz), max. 1 m/s2 (9 to 200 Hz)

sinusoidal (IEC 68-2-6)

Ambient Conditions,

Storage

Ambient storage conditions refer to the conditions the option module is

subjected to during storage in the protective package.

Temperature: -40 to +70°C.

Relative Humidity: Less than 95%, no condensation allowed.

Atmospheric Pressure: 70 to 106 kPa

Vibration: Max. 0.3 mm (2 to 9 Hz), max. 1 m/s2 (9 to 200 Hz)

sinusoidal (IEC 68-2-6)

Shock: Max. 100 m/s2, 11 ms (IEC 68-2-29)

Ambient Conditions,

Transportation

Ambient transportation conditions refer to the conditions the option

module is subjected to during transportation in the protective package.

Temperature: -40 to +70°C

Relative Humidity: Max. 95%, no condensation allowed.

Atmospheric Pressure: 60 to 106 kPa

Vibration: Max. 3.5 mm (2 to 9 Hz), max. 15 m/s2 (9 to 200 Hz)

sinusoidal (IEC 68-2-6)

Shock: Max. 100 m/s2, 11 ms (IEC 68-2-29)

Bump: Max. 300 m/s2, 6 ms (IEC 68-2-29)

Fall: 250 mm

Overview The NTAC-01 is compatible with ACS 600 drives with Standard

Application Program versions from 2.8 to 3.0. Version 5.0 (and later)

require the use of the NTAC-02. Thus, NTAC-01 and NTAC-02 are not

interchangeable.

Differences between

NTAC-01 and NTAC-02

All information about the NTAC-02 given elsewhere in this manual also

applies to the NTAC-01, with the exception of what is listed in this

section.

Terminal Designations The terminals of the NTAC-01 can be connected as shown for the

NTAC-02 in Chapter 3. Although unmarked on the label, NTAC-01

terminal X2:1 can actually be used as an additional -V terminal.

Moreover, the SH and PE terminals are both connected to module

earth.

Encoder Supply Voltage The encoder supply voltages available from the NTAC-01 are 12 and

24 V (instead of 15 and 24 V available with the NTAC-02).

Cabling The maximum encoder cable length for the NTAC-01 is 150 m.

Technical Data Encoder inputs:

• Logical thresholds (12 V encoder supply): “1” > 8.3 V, “0” < 3.7 V

NTAC Setup in Std.

Application Program

V2.8 to 3.0

This section only applies when an NTAC-01 module is connected to an

ACS 600 equipped with Standard Application Program version 2.8 to

3.0. Users of other application programs should refer to the drive

manuals.

Before adjusting the parameters, ensure that the module node number

is set to 16. Note that the setting takes effect only on the following

module power-up.

98.1 ENCODER

MODULE

This parameter activates the communication between the ACS 600 and

the NTAC module.

YES

Communication is active.

NO

Communication is not active.

上一篇： ABB TET106......

下一篇： ABB TC630 ......

Beckhoff CX1100-0910 - Power Supply Module
Beckhoff C5210-0010 - Communication Module C5210
BECKHOFF KL1352 - Bus Terminal SET OF 2 FREE FAST SHIP
Beckhoff EL3058 - 8 x analog input single ended 4...20mA 85惟 shunt 12bit
Beckoff CX1100-0920 - UPS Module 24VDC (US SELLER) * *
BECKHOFF C6920-0000 - C69200000 PLC Moudule
Beckhoff CX5120-0115 - CPU controller module CX5120-0115
Unknown 15F5C1E-Y50A - Of Frequency Converters
Beckhoff AX5118-0000-0200 - Servo Drive HTP0
BECKHOFF AX5106-0000-0200 - Servo Drive
Beckhoff CX5240-0175 - Module (free) #U2327D YG
Beckhoff CP6607-0001-0000 - Compact PC Panel Economy Installation Operator 5,7 "
Beckhoff EP3744-0041 - 2022 EP37440041 Module
Beckhoff CP6209-0001-0020 - 6.5" PC Touch Screen Control Panel 24VDC
Beckhoff CX9020-0111 - /U900 +8x+2xEL3121+1x EL9410+3xEL1008+1x EL2008 Set
Beckhoff C6525-1030-0050 - Industrial PC
Beckoff CX1100-0920 - UPS Module 24VDC (US SELLER)
Beckhoff CX5010-0120 - CX5010 Processor Intel Atom Z510 B24
Siemens 6FC5203-0AF04-1BA1 - Operation Panel
Beckhoff CX5230-0175 - / 000029724 Embedded PC / Industrial PC on Rail
Beckhoff CP3916-0000 - industrielles Anzeige- und Bedienterminal
BECKHOFF CX1500-M310 - CX1000-N000 CX1000-0011 CX1000-C00L CX1100-0002 PLC Module
Beckhoff EL1872 - 16-channel digital input terminal
BECKHOFF EP2318-0001 - module
Beckhoff CX9020-0110 - Basic CPU Module
Beckhoff EL2564 - EtherCAT Terminal, 4-channel LED output, 5鈥?8VDC, 4A, RGBW
Beckhoff CX5130-0155 - /000105637 Automation Embedded PC
B&R 400 - Power Control Panel Rev D0 24 VDC
Beckhoff CX2020-0155 - module
Beckhoff CX9020-0115 - PLC Module
BECKHOFF EL6695 - PLC EL 6695
BECKHOFF EL7047 - PLC Modules
Beckhoff CX1000-0012 - Control HW 2.2 + CX1500-M310 + CX1000-C00L + CX1100-0002+
Beckhoff C6920-1039-0030 - control cabinet industrial PC CPU Celeron 1.90 GHz, 2 cores
BECKHOFF CX1100-0910 - PLC Module#
Beckhoff IL2301-B318-0000 - Coupler Box 4 Channel Digital Input |
Beckhoff CX7080 - Module
Beckhoff C6930-0060 - Industrial PC
Beckhoff CP7902-1060-0000 - Touchscreen 15 " CP7902
beckhoff CX9020-0111 - Controller module or UPS
Beckhoff CX8091 - PLC Module CX8091
Beckhoff C6640-1008-0030 - Control Cabinet Industrial PC
BECKHOFF CX1100-0920 - module
Beckhoff C9900-M921 - see pictures
BECKHOFF CP6829-0001-0000 - Touch Panel
BECKHOFF C6930-0060 - Industrial Computer
BECKHOFF CX8050 - PLC module
Beckhoff CP6202-0021-0020 - Touch Screen #
BECKHOFF AM3031-0C20-0000 - SERVO MOTOR
Unknown BCH1302N11A1C - Servo motor
Beckhoff EL2502 - 2-channel pulse width output terminal
Beckhoff EL6731 - Profibus Master / *Rev: 0025
Beckhoff CP3918-0010 - Control Panel
BECKHOFF CP2915-0010 - [24 MONTH WARRANTY] Control Panel
Beckhoff AX5203-0000-0202 - Servo Drive
Schneider TSXDSY64T2K - PLC OUTPUT MODULE
Beckhoff EP4174-0002 - Module-
Beckhoff IL2302-B318-0000 - Profibus Box
Beckhoff CP6709-0001-0000 - Touchpanel
BECKHOFF CX2030-0123 - Controller
Beckhoff CX9020-0111 - Processor Module
Beckhoff CX1020-0000 - CX Basic CPU Module
Beckhoff AX2003-AS - Servo Drive HTP0
Beckhoff C6240-1052-0040 - 4-086-06-3073 Industrial Computer CB1052-0003
Beckhoff EL1918 - 8 xTwinSAFE Input
Beckhoff AM8072-0R20-0000 - Servomotor
BECKHOFF AM8021-1B21-0000 - servo motor #T882 YS
Beckhoff EL6224 - 4 X Terminal IO-LINK
Beckhoff CX5140-0135 - embedded PC with Intel Atom processor 4 GB HW 3.6
Beckhoff CP7201-1000-0000 - Panel PC #
Beckhoff CX5130-0121 - Embedded-PC 4GB CPU Module HW 2.5 Industrial PC
Beckhoff AM8022-0D41-1002 - Servomotor
BECKHOFF CX2030-0130 - Module
BECKHOFF EL1872 - 16-channel digital input terminal
Unknown GXMMW.A203P33 - 1pc encoder
Beckhoff EL6631-0000 - EtherCAT Terminal 2-Port EL 6631
BECKHOFF C6925-0030 - Industrial Computer
Beckhoff CX8190 - A Module
BECKHOFF CX2040-0135 - CX2040-0135/000000927 CPU BASE MODULE i7 2715QE 2.1GHz --
BECKHOFF KL6023-0000 - Wireless adapter
Saia Burgess PCD7.F700 - PCD7F700 Communication Module
Beckhoff CX5130-0112 - CPU Module
BECKHOFF CX1020-N010 - CX1020-N000 CX1020-0111 CX1100-0004 EL2008 EL3064 EL4004
Beckhoff EP1819-0021 - A Module
Beckhoff CX2030-0120 - / 4gb with CX2100 0004
B&R X20-XC-0292 - Automation Powerlink Ethernet Bus Controller Module
Beckhoff BK3110 - One PLC Module
BECKHOFF KL3222 - PLC Module
BECKHOFF CX1500-M310 - CX1000-N000 CX1000-0011 CX1000-C00L CX1100-0002 PLC MODULE
Beckhoff CP3918-0010 - Control Panel
Beckhoff CX2030-0100-1002 - /4GB + CX2100 + CX2550 + CX2500-0060 + SSD
Beckhoff EP1816-0008 - PLC Module
Beckhoff CX5130-0112 - Module
Beckhoff Cx1500-m750 - CPU Hw: 1.4
BECKHOFF AX5112-0000-0200 - AX511200000200 Servo Driver
Beckhoff EL3751 - EtherCAT Terminal 1 Channel Analog Input Multifunction 24 Bit
Beckhoff CX1100-0002 - Power Supply Module
Beckhoff CP3916-1016-0010 - Control Panel
BECKHOFF CX9001-1101 - #NAME?
Beckhoff EP3174-0002 - EtherCAT Box Module
Beckhoff C6030-0070 - servo drive
Beckhoff CX2020-0120 - /4GB CPU, CX2100-0904, 3x EL6900, EL1904, 16GB Memory
BECKHOFF C6110 - BOX-PC 113608
BECKHOFF EK1914 - module #P
Beckhoff C6140 - Ipox IP-4GVI63 + CH7009A_DVI_TV + SIEMENS A5E00369843 + WD800AAJB
Beckhoff CX5020-0111 - controller Good quality
BECKHOFF C6015-0010 - / 6559380 ULTRA-COMPACT INDUSTRIAL PC ()
Beckhoff AX5203-0000-0200 - PLC module
Beckhoff EL2872 - 16-channel digital output terminal
BECKHOFF C3640-0000 - Panel Industrial PC 100/240VAC 128MB E0122L
Beckhoff CX8031 - Module
Beckhoff CX5020-0120-1002 - PLC module#
Beckhoff C6140 - M845B + SIEMENS A5E00369843 + C9900_A159_1 + AUTOMATA CAN PCI 1N
BECKHOFF AX5112-0000-0200 - Servo Drive*ie
B&R ECPA42-01 - Analog Output Module 4-Channel, +/- 10V Output Signal, 20mA Max
Beckhoff EL6631-0010 - PLC Module
BECKHOFF C6930-0070 - CONTROL CABINET INDUSTRIAL PC
BECKHOFF AX5112-0000-0200 - AX511200000200 Servo Driver
BECKHOFF EK9000 - Programmable Logic Controller Module EK9000 EK9000
BECKHOFF C6920-1028-0000 - Industrial computer
Beckhoff CX2030-0120 - controller Module
Beckhoff BX8000-0000 - Bus Terminal Controller HW 4.4
B&R 3NC154.60-2 - Positioning Module#
BECKHOFF CX1020-0122 - PLC module
Beckhoff AM3032-0D40-0000 - Servo Motor
BECKHOFF CX5020-0111 - CPU Module CX5020-0111
Beckhoff CB1051 - G5 Motherboard
BECKHOFF KL2641 - 1-channel relay output terminal