+086-15305925923

K-WANG

Service expert in industrial control field!
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence 
Ship control system
Equipment control system
Power monitoring system
Current position:
新闻动态
newS
   
Brand

XYCOM AIO XVME-540 Analysis of I/O Module

From: | Author:Wang | Time :2025-05-28 | 111 visit: | Share:
XYCOM AIO XVME-540 Analysis of I/O Module
Features
• 32 single-ended or 16 differential input channels
• Inputs are configurable as bipolar or unipolar
• 12-bit conversion
• Three ranges of programmable gain
• Jumper-selectable input/output voltage ranges
• Four input sampling modes
• Four output channels, each selectable for
voltage or current output
• Fully compatible with Analog Devices 3B
Signal conditioning


Applications

• Data acquisition
• Process control
• Pressure and temperature sensing
• Machine control


Overview

The XVME-540 Analog Input/Output Module is a powerful, VMEbus-compatible I/O module that
can perform 12-bit A/D and D/A conversions.
The XVME-540 contains 32 single-ended or 16 differential analog input channels.
The input channels can be programmed to operate in any one of four operating modes:  random channel sampling, sequential channel sampling, single channel sampling, and sampling based on an
external trigger.
The XVME-540 has program mable gain available within one of three jumper selected ranges.
The XVME-540 also contains four analog output channels.
These output channels can be config ured as either voltage or current outputs.


Analog Outputs

Number of Channels:4
Accuracy
Resolution:12 bits
Overall error:±1/2 LSB
Differential linearity:±1 LSB
Voltage Output Characteristics
Ranges:0-5 V, 0-10 V, ±5 V, ±10 V
Output current:5 mA min. @ ±10 V
Settling time:50 µsec
Load resistance range:50-500 ohms
Offset T.C. 75 ppm/ºC
Gain T.C. 100 ppm/ºC
Current Loop Characteristics
Range:4-20 mA, non-isolated
Compliance voltage:10 V @ 20 mA
Loop supply voltage:+15 V to +30 V
Settling time:50 µsec
Load resistance range:50-500 ohms
Offset T.C. 75 ppm/ºC
Gain T.C. 100 ppm/ºC


Analog Inputs
Number of Channels
Single-ended:32
Differential:16
A/D Input Full Scale Voltage Ranges (G=1)
Unipolar:0-5 V, 0-10 V
Bipolar:±2.5 V, ±5 V & ±10 V
Programmable Gain
Range:1 1,2,5,or 10
Range:2 4, 8, 20, 50, or 100
Range:3 10, 20, 50, or 100
Maximum Input Voltage
Power on 44 V
Power off 30 V
Input Impedance
w/22 MΩ resistor 17 MΩ, min.
w/o 22 MΩ resistor 100 MΩ, min.
Bias Current:±100 nA, max.
Input Capacitance:225 pF, max.
Operating Common Mode Voltage:+13 V/-11 V
Common Mode Rejection:Ratio 60 db, min.
External Trigger to Sample:25 µsec
VMEbus Compliance
Complies with VMEbus Specification:IEEE 1014
A24/A16:D16/D08(EO) DTB Slave
Interrupter:(1)-I(7)(STAT), RORA
Interrupt Vector: D08(0)(DYN)
Interrupt Signals:SYSFAIL
Form Factor NEXP
Conforms to Xycom Automation Standard I/O Architecture


Product Overview

The XYCOM AIO XVME-540 I/O module is a high-performance industrial grade input/output module designed based on the VMEbus architecture, aimed at providing reliable and flexible signal interaction solutions for industrial automation control systems. As an important member of the XYCOM AIO (All In One) series, it highly integrates multiple I/O functions, can quickly collect and process various signals from industrial sites, and accurately output control instructions to actuators, playing a key role in industrial automation production lines, mechanical equipment control, energy management systems, and other fields.


Key advantages

High integration: integrating multiple I/O functions into one, reducing the number of modules in the system, lowering system complexity and cost, while improving system reliability and stability.

Flexibility and Scalability: Rich I/O channels and support for multiple communication protocols enable it to flexibly adapt to different industrial application scenarios and system requirements. Users can easily expand and upgrade the system according to their actual needs by increasing or decreasing the number of modules, adjusting module configurations, and other methods.

High reliability: using industrial grade components and strict manufacturing processes, it has excellent anti-interference ability and environmental adaptability. In harsh industrial environments such as high temperature, humidity, vibration, and strong electromagnetic interference, it can still operate stably for a long time, effectively reducing equipment failure rates and maintenance costs.

Easy to use and maintain: Provides standardized interfaces and communication protocols for easy connection and integration with other devices. Meanwhile, the user-friendly interface and comprehensive technical documentation enable engineers to quickly get started with programming, debugging, and maintenance work.

Precautions

Installation environment: During installation, a dry, well ventilated, and dust-free environment should be selected to avoid installing I/O modules in places with corrosive gases, large amounts of dust or water vapor, and to prevent electronic components from being corroded or damaged. At the same time, it is necessary to ensure that the installation location has good heat dissipation conditions to avoid affecting the performance and lifespan of the module due to high temperatures.

Wiring operation: When wiring the I/O module, it is necessary to ensure that the equipment is in a power-off state and strictly follow the wiring diagram and instructions to avoid module damage or system failure caused by wiring errors. For analog signals, shielded cables should be used for connection and grounding treatment should be done to reduce signal interference.

Static protection: When installing, disassembling, or maintaining I/O modules, operators must wear protective equipment such as anti-static wristbands to avoid damage to the precision electronic components on the module caused by human static electricity. During the operation, direct contact with electronic components and circuits should be avoided as much as possible.

Communication settings: When establishing communication connections and setting parameters, ensure that the communication protocol, baud rate, data format, and other parameters of the I/O module are consistent with those of other devices, otherwise communication failure may occur. During system operation, if communication parameters need to be changed, the relevant equipment should be stopped before setting the parameters.


  • CONVERTEAM CDG34EG2144D5C / CDG34EG2144D5C - Relay
  • CONVERTEAM 20X4341/10 / 20X434110 - Module
  • CONVERTEAM MVAJ26T1BB0502A / MVAJ26T1BB0502A - Relay
  • CONVERTEAM 20X4457/90 / 20X445790 - Module
  • Alstom MFVUM 22D1AA0014A - Digital Frequency Relays Freq Rating 10.001 - 500 Hz
  • CONVERTEAM 20X4492-10 / 20X449210 - Module
  • GEC Alstom 23X2171BR - Power Supply Board KCC8424 PCB Kcc 8424 Circuit
  • GEC Alstom 20X1207 BRL - Power Supply Board KCC8214 PCB KCC 8214 Circuit 20X 1207
  • CONVERTEAM 18-12-0024 / 18120024 - Module
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL 30Z-2116
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL 30Z-2116
  • CONVERTEAM GM0042002 / GM0042002 - Module
  • ABB Servo Motor Type F12M4H 57344 - Alstom
  • Alstom 29.135722 - para Minisemi-D380 Platino Board Card
  • CONVERTEAM C10/120-M / C10120M - (REPAIR EVALUATION ONLY)
  • Alsthom Parvex CMS2 - Converter CMS3250306
  • CONVERTEAM 20X4368/10 / 20X436810 - Module
  • CONVERTEAM 30V7000/10 / 30V700010 - Power Supply
  • CONVERTEAM 3CKDA5001A / 3CKDA5001A - Module
  • CONVERTEAM 20X4390/10 / 20X439010 - Module
  • CONVERTEAM 28X3557/20B / 28X355720B - Module
  • CONVERTEAM DC030-27V4000/40 / DC03027V400040 - Power Supply
  • CONVERTEAM 8321-6002 / 83216002 - (used tested cleaned)
  • CONVERTEAM 8321-6001 / 83216001 - Module
  • CONVERTEAM 20X4473/10 / 20X447310 - Module
  • Cooper GEC TFP125 - 11 x 125A Bolted Tag Fuse gG (Break Capacity 660VAC 80kA)
  • CONVERTEAM MPA-030-4124 / MPA0304124 - Module
  • CONVERTEAM 029.045.701/00 / 02904570100 - Module
  • CONVERTEAM KB1SDX200 / KB1SDX200 - Module
  • CONVERTEAM 20X4328/40 / 20X432840 - Module
  • CONVERTEAM MRTP02D1AA0001B / MRTP02D1AA0001B - Module
  • CONVERTEAM 029.221442 / 029221442 - Module
  • CONVERTEAM MBCZ13301H1CB2216B / MBCZ13301H1CB2216B - Relay
  • CONVERTEAM MVAJ26D1BB0752A / MVAJ26D1BB0752A - Relay
  • CONVERTEAM MV504A4C1A / MV504A4C1A - Inverter
  • CONVERTEAM MCAA13B1BA0533A / MCAA13B1BA0533A - Relay
  • CONVERTEAM M40-70005 / M4070005 - Module
  • CONVERTEAM 9066-4001 / 90664001 - Module
  • CONVERTEAM 30V9400/10 / 30V940010 - Power Supply
  • CONVERTEAM 20X4473/20 / 20X447320 - Module
  • CONVERTEAM 20X3455/20 / 20X345520 - Module
  • CONVERTEAM MBCZ17001D100200A / MBCZ17001D100200A - Relay
  • CONVERTEAM MVAJ051RA0200B / MVAJ051RA0200B - Relay
  • CONVERTEAM 20X4492-10 / 20X449210 - Module
  • CONVERTEAM MVAA12J1BG9013C / MVAA12J1BG9013C - Relay
  • CONVERTEAM GDS1006-4001 / GDS10064001 - Keypad
  • CONVERTEAM A48DI-40DX-B7/95 / A48DI40DXB795 - Meter
  • CONVERTEAM GDS1010-4005 / GDS10104005 - Keypad
  • Alstom Semi D 380 (415) / 60 + Go V3.1 029.135722 - Power Converters
  • ALSTOM MINISEMI D 380 (415) / 60+GO V3.1 029.135722 - Inverter Motor Controller
  • CONVERTEAM GDS1002-4005 / GDS10024005 - Keypad
  • CONVERTEAM MVAZ04R1BA0533B / MVAZ04R1BA0533B - Relay
  • CONVERTEAM MV501S2B1 / MV501S2B1 - Inverter
  • CONVERTEAM 20X4334/30 / 20X433430 - Module
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL 30Z-2116
  • CONVERTEAM VF4004B / VF4004B - Inverter
  • CONVERTEAM H49FFBBCC00000B / H49FFBBCC00000B - Module
  • CONVERTEAM 20X4274/10 / 20X427410 - Module
  • GENERAL ELECTRIC 029.139 692 / 029139692 - Module
  • CONVERTEAM 029.232 603/09 / 02923260309 - Module
  • CONVERTEAM 20X4496/20 / 20X449620 - Module
  • CONVERTEAM 20X4283/10 / 20X428310 - Module
  • GEC Alstom 23X2171BR - Power Supply Board KCC8424 PCB Kcc 8424 Circuit
  • CONVERTEAM S20X4282/60 / S20X428260 - Module
  • CONVERTEAM SR6617B / SR6617B - Module
  • CONVERTEAM 23X2195/10 / 23X219510 - Module
  • ALSTOM 37768T-22 - NEW OLD STOCK Central Pump 3.6 kW 480 V 3.125
  • CONVERTEAM MCGG22D1CD0503C / MCGG22D1CD0503C - Relay
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL 30Z-2116 a
  • CONVERTEAM 20X1481/60 / 20X148160 - Module
  • CONVERTEAM 20X4264/60 / 20X426460 - Module
  • CONVERTEAM GM0024001 / GM0024001 - Module
  • CONVERTEAM 20X4489/30 / 20X448930 - Module
  • CONVERTEAM MCTH01F1AD0751C / MCTH01F1AD0751C - Relay
  • CONVERTEAM P15D211A1A0010A / P15D211A1A0010A - Relay
  • CONVERTEAM 029146624 / 029146624 - Module
  • CONVERTEAM 029.297-727/11 / 02929772711 - Module
  • CONVERTEAM 029.228791 02 / 02922879102 - Module
  • CONVERTEAM 30V2000/20 / 30V200020 - Power Supply
  • CONVERTEAM MBCI01N1AD0511B / MBCI01N1AD0511B - Module
  • CONVERTEAM 20X4334/40 / 20X433440 - Module
  • CONVERTEAM 20X4331/10 / 20X433110 - Module
  • CONVERTEAM RT-400-5-2.5-3 / RT4005253 - Module
  • CONVERTEAM MBCZ16011D1002000A / MBCZ16011D1002000A - Relay
  • CONVERTEAM DL7K-10 240V 50/60HZ / DL7K10240V5060HZ - Contactor
  • CONVERTEAM 20X4486/10 / 20X448610 - Module
  • CONVERTEAM MVTW03L1AA0751D / MVTW03L1AA0751D - Relay
  • CONVERTEAM 029.353276-02 / 02935327602 - Module
  • CONVERTEAM 029.35276-02 / 0293527602 - Module
  • CONVERTEAM 30V2000/60 / 30V200060 - Power Supply
  • GEC Alstom 20X1207 BRL - Power Supply Board KCC8214 PCB Kcc 8214 Circuit
  • CONVERTEAM 20X1357/M256-60-002 / 20X1357M25660002 - Module
  • CONVERTEAM MV503S2B1 / MV503S2B1 - Inverter
  • CONVERTEAM 8321-6001 / 83216001 - (new with box)
  • CONVERTEAM 20X4284/10 / 20X428410 - Module
  • CONVERTEAM 20X4487/10 / 20X448710 - Module
  • CONVERTEAM MCGG52P1CB0753F / MCGG52P1CB0753F - Relay
  • CONVERTEAM 18-12-0024 / 18120024 - Module
  • CONVERTEAM 20X4318/20 / 20X431820 - Module
  • CONVERTEAM GM0032001 / GM0032001 - Module
  • Alspa - TA314F - Alstom Aslpa TA314F-Alstom-TA314F- - RMS Commerce
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL
  • GEC Alstom KCC8302 - Thyristor Rectifier Stack Power Module 20X-1310CRL 30Z-2116
  • CONVERTEAM GM0042004 / GM0042004 - Module
  • Areva Alstom KCGG14201T50CEC - Single Phase Overcurrent AC Relay
  • ABB Servomotor Tipo F12M4H 57344 - Alstom
  • Alstom 29.135722 - pour Minisemi-D380 Platine Tableau Carte
  • CONVERTEAM L403 TBU 100 / L403TBU100 - (REPAIR EVALUATION ONLY)
  • CONVERTEAM 20X4384/40 / 20X438440 - Module
  • CONVERTEAM MVAJ26D1BB0752A / MVAJ26D1BB0752A - Relay
  • CONVERTEAM 029.151-142 / 029151142 - Module
  • CONVERTEAM 30V9500/10 / 30V950010 - Power Supply
  • CONVERTEAM MBCI01N1AB0761B / MBCI01N1AB0761B - Module
  • CONVERTEAM 20X4246/110 / 20X4246110 - Module
  • CONVERTEAM MVAA11B1CK0784A / MVAA11B1CK0784A - Relay
  • CONVERTEAM MCGG52P1CD0503F / MCGG52P1CD0503F - Relay
  • CONVERTEAM 20X4290/10 / 20X429010 - Module
  • CONVERTEAM 20X4372/10 / 20X437210 - Module
  • CONVERTEAM 23X2648/10 / 23X264810 - Module
  • CONVERTEAM MCGG82H1CB0753C / MCGG82H1CB0753C - Relay
  • CONVERTEAM MVAJ26D1BB0502A / MVAJ26D1BB0502A - Relay
  • CONVERTEAM CE693PWR331 / CE693PWR331 - Power Supply
  • CONVERTEAM 20X4506/10 / 20X450610 - Module
  • 1XPT100 KLAS 1/2" NPT Thread 15B2 - Temperature Sensor Probe
  • CONVERTEAM DI100 / DI100 - Module
  • Alstom Minisemi D 380 (415) / 60+ Go V3.1 029.135722 - Power Conversion
  • CONVERTEAM MCTH01F1AB0751C / MCTH01F1AB0751C - Relay
  • GEC Alstom 20X1207 BRL - Power Supply Board KCC8214 PCB Kcc 8214