K-WANG

+086-15305925923

Service expert in industrial control field！

English 简体中文

NameDescriptionContent

Adequate Inventory, Timely Service

pursuit of excellence

Ship control system

Equipment control system

Power monitoring system

Current position:

Home >> ABB >> ABB IndustrialIT System 800xA S800 I/O System

新闻动态

newS

Brand

ABB IndustrialIT System 800xA S800 I/O System

S800 I/O is a comprehensive, distributed

and modular process

I/O system that communicates with parent controllers over

industry-standard

field buses. Thanks to

its broad connectivity

it fits a wide range of

process controllers

from ABB and others.

By permitting installation in the field, close

to sensors and actuators, S800 I/O reduces the installation

cost by reducing the

cost of cabling. And

thanks to features

such as “hot swap” of

modules, “on-line”

reconfiguration and

redundancy options,

it contributes to

keeping production –

and thereby profits –

up.

General specifications

Power supply: 24V d.c. (19.2 - 30V)

Temperature range: 0…55°C

Protection class: IP20

Standards complied with:

Electrical safety: EN 3810, EN 5017-8, IEC 61131-2,

UL508, CSA 22.2 No. 142-M1987

Hazardous locations (Class 1, Div. 2):

CSA 22.2 No. 213-M1987, FM 3600, FM 3611, UL 1604

Corrosive gases: ISA Class G2 (G3 pending)

Isolation test voltage: 500/2000V a.c.

Communication media

Advant Fieldbus 100. Twisted pair screened/coaxial/fiberoptic cable. Up to 79 stations per bus. Up to 32 per

twisted-pair segment. Bus length: Up to 750m

(2 460ft.) per twisted-pair segment overall up to:

15km (9.3 miles).

Profibus DP. Twisted pair screened/fiber-optic cable. Up to

99 stations per bus. Up to 32 per twisted-pair

segment. Bus length: Up to 1200m (3937ft.) per

twisted-pair segment.

Communication interfaces

CI810 For Advant Fieldbus 100. Supports dual bus-cable

redundancy.

CI801 For PROFIBUS-DP/V1. Hot Configuration in Run &

HART® pass-through. GSD-file provided.

TB820 / 825 / 810 / 811 / 842. Optical cluster modem/ports

for ModuleBus/drives integration.

Redundant interface

CI820 For redundant Advant Fieldbus 100 in combination

with Advant Controller 400 series controllers.

TB815 Interconnection Unit. An electrical and optical

ModuleBus interface for coordination of the two

parallell CI820 needed.

CI840 For redundant PROFIBUS-DP/V1. Hot Configuration in Run & HART® pass-through. GSD file

provided.

TB840 Optical cluster modem for redundant Modulebus.

Installed on TU840/TU841. Used with AC 800M.

Module Termination Units (MTU:s)

Compact, 50V applications

TU810 With screw terminals.

TU812 With 25 pin D-sub connector.

TU814 With 3 crimp snap-in connectors.

Compact, 250V applications

TU811 With screw terminals.

TU813 With 3 crimp snap-in connectors.

Compact for intrinsic safety

TU89X With screw terminals & isolated power supply.

Extended, 50V applications

TU830 / TU835 / TU838

With screw terminals, pwr. distribution & fuse.

TU833 With spring-cage term., pwr. distribution & fuse.

Extended, 250V applications

TU831 / TU836 / TU837

With screw terminals, pwr. distribution & fuse.

Redundancy, 50V applications

TU842 / 843 (horiz./vert. mounting) w. screw terminals.

TU844 / 845 (horiz./vert. mounting)

With screw terminals and shunt sticks, TY80X.

TU805 For DI801 & DO801. With field power distribution

screw terminals.

Station layouts

No. of I/O modules:

Up to 24 per I/O station.

Extension cable:

Plug-in, lengths: 0.3, 0.6 and 1.2m (1, 2 & 4ft).

Optical ModuleBus: Up to 7 I/O clusters and/or 24 I/O

modules. Max length: 15 or 200m (49 or 656ft).

S800 I/O modules

Digital input modules

DI810 16 channels, 2 groups of 8 ch., 24V d.c., current

sink.

DI811 16 ch., 2 groups of 8 ch., 48V d.c., current sink.

DI814 16 ch., 2 groups of 8 ch., 24V d.c., current source.

DI820 8 ch., separate returns, 110V d.c., 120V a.c.

DI821 8 ch., separate returns, 220V d.c., 230V a.c.

DI825 With time tagging, 8 ch., sep. returns, 125V d.c.

DI830 With time tagging. 16 ch., 2 groups of 8 ch., 24V

d.c., current sink. Resolution: <0.5ms.

DI831 With time tagging. 16 ch., 2 groups of 8 ch., 48V

d.c., current sink. Resolution: <0.5ms.

DI885 With time tagging & wire-fault detection.

8 ch., common return, 24-48V d.c., current sink.

Time tagging resolution: 1ms.

Pulse input module

DP 820 2 channels, separate returns, 0.25Hz - 1.5MHz,

signal voltage: 5 / 24V d.c.

Digital output modules

DO810 16 channels, 2 groups of 8 ch., 24V, max 0.5A d.c.,

transistor, current source, short-circuit-proof.

DO814 16 ch., 2 groups of 8 ch., 24V d.c., max 0.5A,

transistor, current sink, short-circuit-proof.

DO815 8 ch., 2 groups of 4 ch., 24V d.c., max 2A,

transistor, current source, short-circuit-proof.

DO820 8 ch., separate returns, 5-250V, max 3A a.c./d.c.,

relay (N.O.).

DO821 8 ch., separate returns, 5-250V, max 3A a.c./d.c.,

relay (N.C.).

Analog input modules

AI810 8 channels, single-ended, 0(4)-20mA, 0(2)-10V, 12

bits.

AI820 Differential inputs, 4 ch., 0(1)-5V, ±0(2)-10V,

±0(4)-20mA, 14 bits + sign.

AI825 Galvanically isolated, 4 ch., ±0(2)-10V, ±0(4)-

20mA, 14 bits + sign.

AI830 RTD inputs, 8 ch., Pt100, Ni100, Ni120, Cu10,

resistor 0-400Ω, 14 bits, 3-wire.

AI835 TC inputs, 8 ch., (7+ ref. junction), separate

returns. TC types B, C, E, J, K, N, R, S, T, -

30…75mV, 15 bits.

Analog output modules

AO810 8 channels, common return, 0(4)-20mA, 14 bits,

load: 850Ω (short-circuit-proof).

AO820 Isolated output. 4 ch., separate returns,

measuring range: ±0(2)-10V, ±0(4)-20mA,

resolution: 12 bits + sign, load: ≤500Ω (current) /

≥2kΩ (voltage), short-circuit-proof.

I/O modules with intrinsic-safety interface

DI890 digital inputs with wire-fault detection

8 ch., separate returns, 24V d.c., current sink.

DO890 digital outputs with wire-fault detection

4 ch., separate returns, load 150-5000Ω, 11V @

40mA, current source, short circuit-proof.

AI890 Analog inputs. 8 ch., single-ended, 0(4)-20mA, 12

bits, transmitter power supply

AI893 TC/RTD inputs. 8 ch., TC: 7 + ref. junction, sep.

returns. TC types B, C, E, J, K, L, N, R, S, T, U,

-10…80mV. RTD: Pt50-1000, Ni100-500, Cu10-

100, resistor 0-4000Ω, 3-wire. 15 bits + sign.

AI895 with intrinsic safety & HART interface

8 ch., single-ended, 4-20mA, 12 bits, transmitter

power supply.

AO890 with intrinsic safety & wire-fault detection

8 ch., common return, 0(4)-20mA, 12 bits, load:

750Ω (short-circuit-proof).

AO895 with intrinsic safety, HART interface & wire fault detection. 8 ch., common return, 4-20mA, 12

bits, load: 750Ω (short-circuit-proof).

S800L I/O modules

DI801 16 channels, 1 group, 24V d.c., current sink.

DI802 8 ch., 110V d.c., 120V a.c.

DI803 8 ch., 220V d.c., 230V a.c.

DO801 16 ch., common return, 24V, max 0.5A d.c.,

transistor, current source, short-circuit-proof.

DO802 8 ch., 5-250V, max 2A a.c./d.c., relay (N.O.).

AI801 8 ch., single-ended, 0(4)-20mA, 12 bits.

AO801 8 ch., common return, 0(4)-20mA, 12 bits, load:

<750Ω.

S800 I/O modules for redundancy & SIL3

DI840 16 channels, common return, 24V d.c., current

sink, extended diagnostics.

DI880 16 ch., 24V d.c., current sink, SIL3, extended

diagnostics.

DP840 8 ch., sep. returns, freq. measurement or pulse

counting, 0.5-20 kHz, 12/24V d.c or NAMUR.

DO840 16 ch., common return, 24V d.c., max. 0,5A,

current source, short-circuit-proof, extended

diagnostics.

D0880 16 ch., 24V d.c., max. 0.5A, current source, SIL3,

short-circuit-proof, extended diagnostics.

AI843 TC input, 8 ch. + ref. junction. TC types: B, C, E, J,

K, L, N, R, S, T, U, -30…75mV, 16 bits, extended

diagnostics.

AI845 8 ch., common return, 0(4)-20mA 0(1)-5V,

extended diagnostics, HART support.

AI880A 8 ch., common return, 0(4)-20mA, SIL3, extended

diagnostics, HART support.

AO845 8 ch., common return, 4-20mA, extended

diagnostics, HART support.

上一篇： ABB S800 I......

下一篇： ABB Advant......

LENZE EPZ-10203 CANPT010W3E Extension Board for Drive PLC Motion Control Systems
LENZE EPL10200-W Industrial Drive PLC Controller for Motion Control and Automation Systems
ABB PM665 3BDS005799R1 Processor Module for Industrial AC800M Automation Control Systems
GE 151X1235DB15SA1 PCM Regulator for EX2100e Power Conversion Module Excitation Control
GE IS215WEMAH1A+IS210BPPBH2CAA Turbine Control and Protection Module Assembly for Mark VIe Systems
GE IS215AEPAH1CH AEPA Card Module for Mark VIe Wind Turbine Control Systems
GE IS210BPPBH2CAA Power Protection Processor Module for Mark VI Turbine Control Systems
GE IS215WECAH1B Wind Energy Control Assembly Module for Mark VIe Industrial Turbine Control Systems
Woodward 1752-015 - Fire Fly Control Engine
Woodward XU2AC - Protection relay
Woodward 8440-1012 - GCP-20 Genset Controller 5a 12/24vdc
Woodward 8440-1831 - EASYGEN 3200-5 REV. K - WITHOUT ACCESSORIES
Woodward 9907-018 - Rev H 2301A Load Sharing & Speed Control For Parts Only
Woodward 9905-367 - DIGITAL SYNCHRONIZER LINE LOAD CONTROL REV.P
Woodward 5453-277 - TMR Power Supply Chassis
Woodward 5464-337 - rev H Module
Woodward 8270-274k - Pamp Generator
Woodward 8440-1765 D - MFR2 8440-1765 D MULTI FUNCTION RELAY MFR 2
Woodward 8406-120 - Egcp-2 Digital Control
Woodward 8272-583 - Apm Motor Control DC24V
Woodward 9905-367 - DIGITAL SYNCHRONIZER AND LOAD CONTROL REV.L 9905-731 REV.G
Woodward XG2 - Protection Relay
Woodward 8280-577 - 723 DIGITAL CONTROL REV NEW 9906-130L/5503-028J
Woodward 8440-1012 - GCP-20 Genset Controller 5a 12/24vdc
Woodward 8901-051 - Booster Servo Motor, Single Cylinder, 2:1
Woodward 8270-1082 - Controller DYN1-10506-004-0-24 Rev C
Woodward 9905-003 - Rev Y Spm-a Synchronizer
Woodward 8273-140 - 2301D LOAD SHARING&SPEED CONTROL
Woodward 8440-1801 - REV D EASYGEN-350-50B/X
Woodward 9907 028 - SPM-A industrial SYNCHRONIZER - USA
Woodward 8273-1014 - Steam Turbine 2301E-ST Load Sharing & Speed Control
Woodward 5410-203 B - 507 Digital Marine Control PCB 7854 A 9-26 / 5410-140 O
Woodward 8272-468 0 - digital reference unit
Woodward 8250-010 - Actuator Hydraulic Governor
Woodward 8408-923 - Single Channel STExcite
Woodward 8272-582 - APM Motor Control 8272582
Woodward 8440-1946 - LS-511 GENSET CONTROLLER
Woodward 9905-003 - Speed & Phase Matching Synchronizer
Woodward DPG-2201-002 - DIGITAL CONTROLLER REV NEW
Woodward 9905-204 - Rev N SPM-A Synchronizer
Woodward Automatic Power Transfer - Automatic Power Transfer & Load Control
Woodward 5430-929 - Pickup Speed 401029-30 MSC 04-2016
Woodward 9907-175 - Load Sharing Module Rev: A
Woodward 8406-121 - EGCP-2 / EGCP - 2 Digital Control REV G #2
Woodward 5448-914 - GCP-20 Genset Control GCP-20 REV D
Woodward 5410-175 B - 507 Digital Marine Control PCB 7857A 5-6 / 5410-131 A /
Woodward7 9907-014 - 2301A SPEED CONTROL REV.H
Woodward 8271-567 - Load Sensor Module 120/208v-ac
Woodward 21/125B - 011401-8-20C8R Controller Module
Woodward 9904-1533 - GE IGV ACTUATOR GE P/N: 362A5051P001
Woodward 5460-573 - FINAL DRIVER MODULE
Woodward DIGITAL SYNCHRONIZER - DIGITAL SYNCHRONIZER AND LOAD CONTROL
Woodward 8444-1065 - MFR300-71M, Multifunction Relay / Measuring Transducer
Woodward 9905-799 - Rev J Digital Synchronizer & Load Control, V#456B
Woodward MM40 - Governor Speed Adjusting Motor Type: 110V AC 50/60Hz
Woodward 5448-893 - SYNCHRONIZING SYSTEM REV F SPM-D10
Woodward XS25 - Protection relay
Woodward 9905-131 - 2301A SPEED CONTROL REV G
Woodward 5501-467 - MICRONET SIMPLEX POWER SUPPLY 220 VOLT REV. C
Woodward 8444-1019 E - Measuring Transducer WOODWARD UMT 1
Woodward 8440-2080-D - EASYGEN-2300-5 /P1 12/24 VDC GENSET CONTROLLER
Woodward 9905-799 - Rev J Digital Synchronizer & Load Control, V#456A
Woodward 8270-807 - EGM GOVERNOR CONTROL
Woodward 8440-1884 K - Genset Controller Easygen-2500-5
Woodward 9907-252 - LOAD SHARING MODULE REV: A
Woodward 1765-837 - SMM40 Speed Adjusting Motor Woodward Governor Ltd
Woodward 9905-971 - Discrete Input Module 12279349
Woodward DC10502-000-024 - Actuator 24V CUMMINS P/N : EK3000B 3283462
Woodward smm40 - speed adjusting motor
Woodward LXMG1614E-14-11 - EASYGEN 3000 Genset HMI Control Panel Rev.B 94V0
Woodward 8440-1667 B - SPM-D10 SYNCHRONISING SYSTEM CHOOSE
Woodward 3074-869 D - 507 Digital Marine Control PCB 7854 N 4-29 / 5500-316 G
Woodward 8440-2050 - EASYGEN-3200-5/P1 Generator Controller Module Rev F
Woodward 5466-318 - MICRONET TMR KERNEL P.S REV C
Woodward 9905-068 - LOW VOLTAGE 2301A LOAD SHARING & SPEED CONTOL P/N:
Woodward 9905-096 - AUTOMATIC GENERATOR LOADING CONTROL REV. L
Woodward 5410-354 A - 507 Digital Marine Control PCB 7854 M 4-30 /
Woodward 9905-760 - REV A LINKNET TERMINATION MODULE ASS
Woodward 5453-276 - F/T Relay - Discrete In
Woodward 9905-385 - PRO-ACT MODEL III DRIVER
Woodward 1846.435 - DSS2 BASE UNIT RPM SWITCH
Woodward 8270-1082 - CONTROLLER REV D DYN1-10506-004-0-24
Woodward 8272-683 - DIGITAL REFERENCE UNIT REV.U
Woodward 8440-1818 B - EASYGEN-3100-1 Engine Generator Control
Woodward 9907-014 - 2301A Speed Control Rev J 10-40VDC
Woodward 8440-1801 - EASYGEN-350-50B/X REV E METERING GENERATOR EASYGEN-300 SERIES
Woodward CSC3GM2 - Woodward SEG DC Voltage Meter DC
Woodward 9907-028 - SPM-A Synchronizer Part
Woodward 8272-536 - PM Motor Control
Woodward XI1E1 - SEG Earth Overcurrent Relay
Woodward 8270-975 - 2301 AMPLIFIER MODULE REV.G
Woodward 9907-247 - 828 DIGITAL CONTROL
Woodward 8440-1947 - LS5-521 CONTROLLER LS-521-5/P1
Woodward 8445 1006 A - SEG Power Protection PCK4 SEG PCKR-MW 24VDC
Woodward 8440-1019 - SPM-D10 Synchronizing System E231544 Rev: B 24Vdc 50/60Hz
Woodward EASYGEN-2000 Series - Genset Control 94V-0
Woodward 8444-1009 - UMT145B REV-C MEASURING TRANSDUCER 24 V DC 5A AC UL 300 V AC
Woodward 8400-015 - PROACT MA DIGITAL SPEED CONTROL
Woodward XU2AC - Over- and Undervoltage Protection Relay
Woodward 8440-1771 - Converting, Controlling, Monitoring RELAY MFR15 PNo.
Woodward 8440-2028 - DIGITAL I/O EXPANSION MODULE REV. NEW IKD1 IKD1M WITH CD
Woodward 5466-1045 - PLC CPU MODULE MICRONET PLUS 9-PIN COM REV E
Woodward 9907-014 - 2301A Speed Control Rev. J
Woodward 8444-1019 - umt 1 / UMT1 Rev F Measuring Transducer
Woodward 9905-377 - 2301A LOAD SHARING SPEED CONTROL
Woodward 8440-1884 A - Genset Controller Easygen-2500-5
Woodward 8440-2080-D - EASYGEN-2300-5 /P1 12/24 VDC GENSET CONTROLLER
Woodward 9905-760 - LINK NET TERMINATION MODULE REV NEW
Woodward 8272-516 - PM MOTOR CONTROL REV J
Woodward 860000110-103 - circuit board Rev.E
Woodward 8280-320 - 723 Digital Control Panel REV. B
Woodward EASYGEN 2000 - Genset Controller
Woodward 5463-785 J - NETCON 5000 Analog Input Module IN PLC
Woodward MRU4A0AB - High PROTEC Protection Relay Rev. R
Woodward 8440-1869 - SPM-D10 Synchronizing System Control-SPM-D10B/PSY4-F-D
Woodward 8901-051 - Booster Servomotor Single Cylinder
Woodward 8271-152 - SPM SYNCHRONIZER
Woodward 9907-028 - SPM-A Synchronizer
Woodward 8440-1831 - EASYGEN3000 3200-5 P/n: REV. H - WITHOUT ACCESSORIES
Woodward 8273-456 - ATLAS W/O PC104 MODULE REV.A
Woodward 5448-890 - 3-Button Interface SPM-D Synchronizing System
Woodward 9907-955 - EM35 ACTUATOR
Woodward EASYGEN-3200-5/P1 - Generator Controller Module Rev F
Woodward 8800-1001 - DSS-2 2-CHANNEL DIGITAL SPEED SWITCH REV-C
Woodward 8440-1614 - Gcp-30 Genset Control Package Rev H
Woodward 1765-821 - Governar Speed Adjusting Motor SMM40 110V AC 50-60 Hz
Woodward 5464-213 - rev L , SIO Module
Woodward 8272-683 - DIGITAL REFERENCE UNIT