ADLINK NuPRO-E320 PICMG1.3 Full length Industrial Motherboard

ADLINK NuPRO-E320 PICMG1.3 Full length Industrial Motherboard

Basic information 

1.Product model: NuPRO-E320 full-length PICMG 1.3 industrial SHB system motherboard

2. Manual version V2.02, updated on August 28, 2009, corrected multiple errors in memory specifications, interface pins, etc; The first version V2.00 was released on May 7, 2009

3. Chip Platform  Intel Q45 GMCH+ICH10 Southbridge, LGA775 slot, compatible with Core 2 quad/dual core and Celeron processors

4.Compliant RoHS environmental protection, aimed at industrial control, automation, machine vision, communication equipment developers/operation engineers

Product Overview (Overall Hardware Specifications)

1. Core platform parameters

-CPU LGA775 socket, supporting Core2 Quad/Duo and Celeron, FSB 800/1066/1333MHz； Single channel processor design

-* * Chipset * * Intel Q45+ICH10, integrated GMA4500 display, supports DirectX10, OpenGL 2.0

-* * Memory * * Dual channel 240pin DDR3 800/1066, dual DIMM slots, maximum 4GB non ECC memory, dual channel requires the same capacity and specifications of memory

-* * BIOS * * AMIBIOS8 16MB SPI flash memory, supports PnP, remote serial port redirection, TPM, PXE network boot, multi-level power management

-* * Storage * * 2-channel onboard SATA2 (3Gbps), with an additional 2-channel SATA on the backplane; 1 IDE (supports optical drive/old hard drive); Support DOM electronic disk

-* * Expansion bus (backplane gold finger lead out) * * PCIe x16 dedicated graphics slot PCIe x4、 Multi channel PCI 32bit/33MHz standard slot

2. Display, network, IO peripherals

1. * * Display * * Rear DB15 VGA interface, onboard SDVO can be connected to PCIe graphics card for dual display; Maximum resolution 2048 × 1536

2. * * Network port * * Dual Intel 82574L Gigabit PCIe network card (LV version only for single network), supporting 10/100/1000 adaptive, PXE, WOL remote wake-up

3. * * Serial port * * COM1 fixed RS232, COM1 supports jumper switching RS232/422/485/485+; COM2 fixed RS232, used for BIOS remote serial port redirection

4. * * USB * * Rear mounted 1 USB 2; Onboard pins with 4 channels; Backplane leads out 4 channels, totaling 9 USB2.0 ports, compatible with USB1.1

5. * * Other IO * * parallel ports, floppy drive interfaces, PS/2 keyboard and mouse Y-shaped interfaces, front chassis panel pins (power/reset/speaker/hard drive lights)

6. * * Audio * * No onboard sound card, DB-Audio2 daughter card needs to be selected to expand HD audio through onboard audio pins

7. * * Security * * The NuPRO-E320DV model is equipped with Infineon SLB9635 TPM1.2 encryption chip, which is used for encryption keys VPN、 disk encryption

### 3. Hardware monitoring and watchdog WDT

-* * Hardware monitoring IC ITE IT8718 * *: Real time collection of CPU/system temperature,+3.3V/+5V/+12V voltage, CPU fan+system fan speed, chassis cover opening detection

-* * Fan control * * Three modes: full speed/automatic temperature control/PWM manual speed regulation, customizable start stop temperature and speed slope

-Watchdog can be programmed for 1 second to 15300 minutes (with a maximum of 255 minutes), and the entire machine will reset after timeout; Supports automatic feeding of dogs with keyboard/mouse, and the appendix provides C language low-level read-write source code

4. Mechanical, Environmental, and Power Consumption

-Size: Standard full length industrial board 338mm × 122mm

-Working temperature: 0~60 ℃, storage -20~80 ℃, humidity 5%~90%, no condensation

-Power supply: ATX industrial power supply, with 4pin independent 12V CPU auxiliary power supply

-The power consumption test is divided into three types of CPUs (Core 2 quad core Q9400, dual core E8400, and Celeron 440): DOS idle, XP idle, and full load. The power data of the baking machine is in multiple levels, and the document fully records the wattage of each current channel

5. List of complete machine accessories

Motherboard, PS/2 adapter cable, SATA data cable x 2, SATA power cable, IDE ribbon cable, floppy drive ribbon cable, serial and parallel port dock cable, USB expansion dock, All in One driver DVD, user manual

Hardware Information (Backplane Interface, Onboard Pin, Jumper)

1. Rear panel IO (external interface of chassis)

From top to bottom: PS/2 keyboard and mouse composite port, LAN1 Gigabit Ethernet port, LAN2 (only available for DV), DB15 VGA, USB2.0 single port; Comes with definition of network port speed/link indicator lights.

2. Complete definition of onboard connectors

Includes 4-pin CPU fan (with speed PWM speed regulation), 3-pin system fan, ATX 24P main power supply, 4pin CPU 12V auxiliary power supply, CN1 chassis front panel (power button, reset, speakers, hard disk LED, chassis lock), parallel port, floppy drive IDE、 Dual SATA, two serial ports COM1/COM2, 50 pin LCD audio sub card socket, two USB pins, external keyboard pins, chassis cover opening detection pins, all pin signal table.

3. Only two sets of core jumpers

1. * * JBAT1 Clear CMOS * *: Short 2-3 to clear BIOS, 1-2 for normal power supply

2. * * JP1~JP4 * *: COM1 serial port level mode jumper, four sets of jumper combinations switch RS232/422/485/485+four communication modes

Hardware Installation Operation Steps

1. LGA775 CPU installation: Detailed buckle opening and closing process, prohibit touching the pins, align the CPU triangle with the socket; Emphasize anti-static operations

2. * * CPU Heat Sink Specification * * Recommended are three industrial heat sinks: 1U/3U/copper core, which must be coated with thermal conductive silicone grease, and the fan should be connected to FAN1 socket; Forced high airflow heat dissipation in high-temperature environments to prevent overheating and system crashes

3. * * DDR3 memory installation * *: Dual channel pairing rule, same capacity and specification DIMM, align with the notch and press the buckle to fix

Driver Installation (mainly for Windows XP)

Driver CD directory division, recommended installation sequence:

1. Intel Q45 chipset driver (basic bus installed first)

2. GMA4500 integrated graphics card driver

3. Intel 82574L Gigabit Network Card Driver

4. TPM security chip driver (DV model only)

5. DB-Audio2 daughter card HD audio driver (requires BIOS to enable HDA)

Each type of driver provides a one click setup process, and after installation, the system must be restarted to take effect.

AMIBIOS 8 Complete Setup Manual (Core Chapters)

Press Del to enter BIOS during startup. Complete parameter description of the seven main menus:

1. Main page

System time, BIOS version, hardware read-only information.

2. Advanced menu (with rich sub items)

1. * * CPU configuration * *: multi-core switch, maximum CPU ID limit, energy-saving options

2. IDE configuration: Hard disk/optical drive automatic recognition, PIO/UDMA mode

3. Super IO: Serial port address and parallel port mode configuration

4. Hardware health: Three speed control modes for fans, temperature alarm threshold, real-time voltage reading

5. Remote access: Serial port SOL console redirection, baud rate/terminal type configuration (core function of industrial remote debugging)

6. USB: Legacy USB supports (DOS/bootable keyboard and mouse), USB 2.0 high-speed switch, storage emulation mode

7. Trusted computing: TPM chip enabled/disabled (DV models)

3. PCI/PnP settings

Manual reservation of IRQ and DMA channels, compatible with old ISA acquisition cards, automatic/manual resource allocation switching.

4. Boot startup menu

Priority of device startup, fast boot, quiet OEM logo, NumLock power on status, network PCIe boot switch.

5. Security Menu

Administrator/user two-level boot password, boot sector virus protection.

6. Chipset chipset settings

-North Bridge: Integrated graphics card/external PCIe graphics card priority order, DVMT dynamic video memory allocation

-South Bridge: HD audio switch, power-off recovery strategy (power on/keep off), LAN PXE ROM switch

7. Exit menu

Save modifications, discard modifications, and load optimal/fail safe default BIOS parameters.

Watchdog WDT Development Materials

1. The underlying hardware relies on the ITE IT8718 Super IO chip, with two port configurations of IO address 0x2E/0x4E

2. Complete C language example code: entering/exiting configuration mode, setting countdown, distinguishing second/minute timing, keyboard and mouse automatic dog feeding, timeout reset logic

3. Supports compilation and calling under DOS and Windows, and is a necessary function for preventing crashes in industrial control programs.

System resource mapping

1. Memory Address Distribution Map: BIOS Region, ISA Hole, PCI Extended ROM, Video Cache Address

2. DMA channel allocation table

3. Complete IO port address mapping (SIO, serial port, parallel port, IDE, PCI configuration port, etc.)

4. Allocation of all IRQ interrupts in PIC/APIC modes

5. PCI bus device routing table, PCI interrupt routing matrix, compatible with third-party acquisition card hardware development, conflict resolution.