ABB 1SAY11 0165R0003 IEB Serial Coupling Module

ABB 1SAY11 0165R0003 IEB Serial Coupling Module

Functional Features

Signal Conversion and Coupling: The module is able to convert and couple between different serial communication protocols and signal levels, enabling seamless serial communication between different devices. It can process and convert serial signals from one device and then transmit them to other devices with appropriate protocols and levels, ensuring accurate signal transmission between devices in the system.

Multi-protocol support: It supports a variety of common serial communication protocols, such as RS232, RS485, Profibus and so on. This makes it possible to connect and communicate with a variety of devices using different serial communication protocols, greatly improving the compatibility and expandability of the system, and facilitating users to integrate different types of equipment in the existing system.

Data Transmission and Verification: During the data transmission process, the module performs verification and error correction processing on the transmitted data to ensure the integrity and accuracy of the data. It detects and corrects errors that may occur during transmission, such as parity errors, framing errors, etc., thus improving the reliability and stability of the system.

Strong anti-interference ability: It adopts advanced anti-interference technology and can work stably in the harsh electromagnetic environment of industrial sites. It has good electromagnetic compatibility, which can effectively inhibit the influence of external interference signals on communication, and at the same time reduce its own interference with other equipment to ensure the quality of serial communication.

Technical Parameters

Power supply voltage: usually DC24V, the permissible voltage fluctuation range is generally between DC19.2V and DC28.8V, to ensure that the power supply voltage fluctuations in the industrial field can still work normally.

Communication Interface: It has several serial communication interfaces, including RS232 interface, RS485 interface, etc., which can be connected according to the specific application requirements.

Communication rate: Support a variety of communication rates, such as 9600bps, 19200bps, 38400bps, 57600bps, 115200bps, etc., the user can set up according to the actual communication needs.

Operating temperature range: generally - 25 ℃ to + 70 ℃, can adapt to the industrial field of various harsh environmental temperature conditions.

Application Scenario

Industrial automation production line: In the automation production line, different production equipment may use different serial communication protocols. The module can realise the interconnection between these devices, such as the communication between PLC and frequency converter, HMI and controller, etc., to ensure the coordinated operation and data sharing of the production line.

Power system automation: In power systems such as substations and power plants, it can be used to realise serial communication between devices such as smart meters, relay protection devices and monitoring systems. It can accurately transmit the power parameters, equipment status and other information collected by each device to the monitoring centre to achieve remote monitoring and management of the power system.

Intelligent Building Control System: In intelligent buildings, it is used to connect different sub-systems such as air-conditioning system, lighting system, lift control system and so on. Through this module, the subsystems can achieve information sharing and collaborative control to improve the intelligent level of the building and the efficiency of energy use.

Robot control system: In the control system of industrial robots, it can be used to realise serial communication between the robot controller and external devices, such as communication with visual sensors, end-effector and other devices. It can transmit the information collected by the sensors to the robot controller, and at the same time send the controller's commands to the external equipment to achieve precise control and intelligent operation of the robot.