K-WANG
+086-15305925923
Service expert in industrial control field！
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence
Ship control system
Equipment control system
Power monitoring system
Brand
Product parameters
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
Description
The 4 Amp 16 Point Relay Output module provides 16 Form A relays for controlling
output loads. The maximum output switching capacity of each circuit is 4 Amps. Each
output point is isolated from the other points, and each point has a separate common
power output terminal. Outputs provide a high degree of noise immunity, minimizing
the need to add external snubbers. The relay outputs can control a wide range of
output devices, such as: motor starters, solenoids, and indicators. The user must
supply the AC or DC power to operate the field devices.
GE IC694MDL916 Output Module, Isolated Relay
The 4 Amp 16 Point Relay Output module provides 16 Form A relays for controlling
output loads. The maximum output switching capacity of each circuit is 4 Amps. Each
output point is isolated from the other points, and each point has a separate common
power output terminal. Outputs provide a high degree of noise immunity, minimizing
the need to add external snubbers. The relay outputs can control a wide range of
output devices, such as: motor starters, solenoids, and indicators. The user must
supply the AC or DC power to operate the field devices.
This module is available as a PACSystems RX3i module (catalog number
IC694MDL916), illustrated at left, or as a Series 90-30 PLC module (catalog number
IC693MDL916). The RX3i version is only compatible with a PACSystems RX3i CPU.
The Series 90-30 version can be installed in any I/O slot in a PACSystems RX3i or
Series 90-30 PLC. See the next page for details of specific CPU version requirements.
Module MDL916 can be used with a Box-style (IC694TBB032), Extended Box-style
(IC694TBB132), Spring-style (IC694TBS032), or Extended Spring-style
(IC694TBS132) Terminal Block. Extended terminal blocks provide the extra shroud
depth typically needed for shielded wires. See the PACSystems RX3i System Manual,
GFK-2314 revision B or later for more information about terminal blocks. Terminal
Blocks are ordered separately.
A DIP switch on back of the module is used to select the outputs’ default mode: Force
Off or Hold Last State. The module must be removed from the backplane to set this
switch.
Individually-numbered LEDs indicate the ON/OFF state of each output. The red/green
TB LED is green when the module’s removable terminal block is locked in place. It is
red when the terminal block is not locked.
Module IC694MDL916 reports Addition of Terminal Block, Loss of Terminal Block,
Hold Last State Configuration Mismatch, and Module Over Temp messages to the
RX3i CPU. Module IC693MDL916 does not report diagnostic status to the CPU.
The red bands on the door card show that MDL916 is a high-voltage module.
Release Information
Release History
Release Comments
IC693MDL916-AA, IC694MDL916-AA Initial Release
Functional Compatibility
Compatible CPU Versions
Module Configuration Software PACSystems
RX3i Series 90-30
IC693MDL916 CPU350 - 10.60, CPU352 - 10.50,
CPU364 – 10.60, CPU374 - 11.03
IC694MDL916
Proficy Machine Edition
version 5.5,
Service Pack 2 or later
Firmware version
3.81
Not compatible
Installation in Hazardous Locations
• EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D, DIV. 2 HAZARDOUS
LOCATIONS IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS
LOCATIONS ONLY
• WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2;
• WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE
REPLACING OR WIRING MODULES; AND
• WARNING - EXPLOSION HAZARD - DO NOT CONNECT OR DISCONNECT EQUIPMENT UNLESS POWER
HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.
Specifications
Refer to the PACSystems RX3i System Manual, GFK-2314, for product standards and general specifications.
Outputs per Module 16 isolated Form A relay outputs
External Power Supply 0 – 125VDC (5/24/125 VDC nominal)
0 – 250VAC (47 to 63 Hz), 120-240VAC nominal
Isolation
Field to Backplane and
to Frame Ground,
Group to Group
250 VAC continuous; 1500 VAC for 1 minute.
Power Consumption 300mA at 5VDC from backplane maximum (all outputs ON)
Thermal Derating See next page
Output Characteristics
Output Voltage 5 – 125VDC (5/24/125 VDC nominal)
5 – 250VAC (47 to 63 Hz), 120-240VAC nominal
Output Current 10mA per point minimum
4A for 5-250VAC maximum (resistive or general purpose)
4A for 5-30VDC maximum (resistive)
200mA for 125VDC (maximum resistive)
2A pilot duty per output (5 to 30VDC, 5 to 250VAC)
2A lamp load per output (5 to 30VDC, 5 to 250VAC)
Output Voltage Drop 0.3VDC maximum
Output Leakage Current Not Applicable (open contact)
Response Times (On/Off) 10ms maximum (At nominal voltage excluding contact bounce)
Switching Frequency 20 cycles per minute maximum
Protection None. External snubbers may be applied if necessary
Relay Contact Life See chart on the next page
Diagnostic Information Field side terminal block presence detection reported to CPU (for RX3i
only)
* When this module is used with DC power supply IC695PSD040 or PSD140, special precautions should be taken
because dropouts in the source voltage will be seen by this module and may cause relay dropouts.
Thermal Derating
The table below shows the number of outputs that can be on at the same time under the maximum load of 4
Amps per point.
Load Current Limitations
Operating Maximum Current for Load Type Typical Contact Life
Voltage Resistive Lamp or Solenoid * (Number of Operations)
5 to 250 VAC 4 Amps 2 Amps 200,000
5 to 250 VAC 0.1 Amp 0.05 Amp 1,000,000
5 to 250 VAC 1 Amp 0.5 Amp 700,000
5 to 30 VDC 4 Amps 2 Amps 200,000
5 to 30 VDC 1 Amp 0.5 Amp 700,000
5 to 30 VDC 0.1 Amp 0.05 Amp 1,000,000
* Assumes a 7ms L/R time constant (DC inductive load) or Cos φ > 0.4 (AC inductive load)
Setting the Output Defaults
The DIP switch on back of the module determines how the outputs will operate if the CPU is set to Stop Mode or
loses communications with the module. The Outputs Default Mode selection made with the DIP switch must
match the selection made for this feature in the module’s software configuration. If the two do not match, a
warning message is displayed in the fault table.
The module must be removed from the backplane to set this switch. Note that there are two DIP switches on the
module. Only the upper switch is used.
Outputs Default mode DIP Switch
Closed (left) = Hold Last State
Open (right) = Force Off
Not Used
With the Outputs Default Mode switch in the right
(open) position, the outputs will turn off whenever
communication with the CPU is lost.
When the switch is in the left position, the outputs
will hold their last programmed value whenever
communication with the CPU is lost. Backplane
power must be present to Hold Last State.
Otherwise, the module will default outputs
regardless of the DIP switch setting.
Field Wiring: MDL916
Connections Terminals Terminals Connections
Output 1, Normally-Open 1 19 Output 9, Normally-Open
Output 1 Return 2 20 Output 9 Return
Output 2, Normally-Open 3 21 Output 10, Normally-Open
Output 2 Return 4 22 Output 10 Return
Output 3, Normally-Open 5 23 Output 11, Normally-Open
Output 3 Return 6 24 Output 11 Return
Output 4, Normally-Open 7 25 Output 12, Normally-Open
Output 4 Return 8 26 Output 12 Return
Output 5, Normally-Open 9 27 Output 13, Normally-Open
Output 5 Return 10 28 Output 13 Return
Output 6, Normally-Open 11 29 Output 14, Normally-Open
Output 6 Return 12 30 Output 14 Return
No Connection 13 31 No Connection
Output 7, Normally-Open 14 32 Output 15, Normally-Open
Output 7 Return 15 33 Output 15 Return
No Connection 16 34 No Connection
Output 8, Normally-Open 17 35 Output 16, Normally-Open
Output 8 Return 18 36 Output 16 Return
Purchase history
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
Total 0 Record
Customer Reviews
Satisfaction ：
5 Stars
No evaluation information
-
Electric tricycle truck, agricultural tricycle, elderly vehicle, warehouse truck -
GE 8042-CC-85 Carrier extension cable, 0.85m -
GE 8086-FC-20 20 + 24 pin cables for 8619 (2m) -
GE 8041-CC-35 Carrier extension cable, 0.35m -
GE 8085-FC-10 20 + 24 pin cables for 8619 (1m) -
GE 8034-CC-12 Intrinsically Safe Carrier Extension
-
GE 8082-FC-30 16-pin cable for 8618 (3m) -
GE 8030-CE-RH Intrinsically Safe Carrier extender, right hand -
GE 8080-FC-10 16-pin cable for 8618 (1m) -
GE 8021-CE-LH Carrier extender, left hand -
GE 8044-CC-20 Carrier extension cable, 2.0m -
GE 8725-CA-RB Railbus isolator carrier with PFM -
GE 8712-CA-NS Node services carrier, Profibus-DP LAN -
GE 8724-CA-PS Intrinsically Safe module power supply carrier
-
GE 8711-CA-NS Node services carrier, screw terminal LAN -
GE 8723-CA-RB Railbus isolator carrier -
GE 8606-FT-RT Field terminal, RTD -
GE 8620-FT-MT Field terminal assembly
-
GE 8604-FT-FU Field terminal, fused -
GE 8617-FT-NI Field Terminal, non-incendive, for 16 ch DI -
GE 8601-FT-NI Field terminal, non-incendive (Div 2) -
GE 8215-DO-IS 4-channel Intrinsically
-
GE 8202-HO-IS 8-channel Intrinsically Safe Analog Output, 4-20 mA with Hart -
GE 8206-TI-IS 8-channel Intrinsically Safe RTD input -
GE 8201-HI-IS 8-channel Intrinsically Safe Analog Input, 4-20mA with Hart -
GE 8117-DO-DC 8-channel DO, 2-60Vdc isolated, unpowered -
GE 8810-HI-TX 8-Channel Safety AI, 4-20mA with HART -
GE 8142-DO-DC 16-channel Digital Output
-
GE 8140-DI-AC 16-channel Digital Input, 115VAC isolated, sinking -
GE 8112-DI-AC 8-channel DI, 115Vac non-isolated, module powered -
GE 8139-SH-DC 126-channel Addressable Smoke and Heat
-
GE 8111-DI-AC 8-channel DI, 115Vac isolated, sinking -
GE 8133-HI-TX 8-Channel Supervised AI with HART -
GE 8110-DI-DC 8-channel DI, 24Vdc non-isolated, module powered
-
GE 8109-DI-DC 8-channel DI, 24Vdc isolated, sinking
-
GE 8129-IO-DC 8-channel Supervised Discrete I/O -
GE 8106-TI-RT 4-channel RTD input
-
GE 8127-DI-SE 32-channel SOE module -
GE 8105-TI-TC 4-channel THC/mV input -
GE 8125-DI-DC 32-channel DI, non-isolated, module-powered -
GE 8104-AO-IP 8-channel AO, 4-20mA -
GE 8122-DI-DC 16-channel DI, 24Vdc isolated, sinking
-
GE 8103-AI-TX 8-channel AI, 4-20mA -
GE 8121-DI-DC 16-channel DI, 24Vdc non-isolated
-
GE 8102-HO-IP 8-channel AO, with HART for 4-20mA
-
GE 8119-VI-05 8-channel Voltage Input, 1-5Vdc -
GE 8101-HI-TX 8-channel AI, 4-20mA with HART -
GE 8755-CA-NS EBIM carrier -
GE 8522-EB-MT Ethernet Bus Interface -
GE 8752-CA-NS Universal Node Services Carrier -
GE 8515-BI-PN PROFINET Scanner Module -
GE IC754VBI12CTD Touch Screen -
GE IC754VGI10MTD Touch Screen -
GE IC754VBI1OMTD Touch Screen -
GE IC754VSL12CTD QuickPanel -
GE IC754VBL12CTD QuickPanel -
GE IC754CGL12CTD QuickPanel
-
GE IC754CBL12CTD QuickPanel -
ABB TZIDC Digital Positioner -
ABB NextMove ESB-2 motion controller -
ABB Advant Controller 70 -
ABB Advant Controller 250 -
ABB ACS850-04 drive modules -
ABB IRB 4600 Industrial Robot -
ABB IRB 910SC SCARA -
ABB Product specification IRB1200 -
ABB DCV 700 thyristor panels -
ABB Advant Controller 160 -
ABB Serial Communications Module RS232 -
ABB PP886 Compact Product Suite hardware selector -
ABB Panel 800 version 6 -
ABB Uvisor™ FAU810 – Flame Analysis Unit -
ABB Switches Automatic Transfer Switches -
ABB Dynamic braking / DC drive -
ABB Automatic Transfer Switch OTM_C_21D -
ABB Switches Change-over and transfer switches -
ABB PGC2000 Series Process Gas Chromatograph -
ABB PGC5000 Series gas chromatographs -
ABB DBDID Process gas chromatographs -
ABB Vapor Pressure (RVP) analyzers -
ABB Distributed busbar protection REB500 -
ABB SYNCHROTACT® upgrade Keep your assets synchronized, safe and productive -
ABB SYNCHROTACT® Datasheet Synchronizing devices and systems
-
ABB C310 Wall- / Pipe-mount universal process controller -
ABB AP100 pH/Redox (ORP) cartridge sensors with water-wash option -
ABB Title this is title and subtitle this is subtitle Power Factor Controller RVC Accurate control and monitoring of capacitor banks -
ABB FOUNDATION Fieldbus Linking Device LD800HSE EX -
ABB Remote Terminal Unit RTU560 -
ABB MEASUREMENT & ANALYTICS TEIP11 -
ABB MEASUREMENT & ANALYTICS Navigator 540 -
ABB For electromagnetic flowmeters FXE4000-DE43F -
ABB COM610 Communication Gateway -
ABB Symphony Plus S+ Control BRC410 -
ABB Symphony Plus SD Series PROFIBUS Interface: PDP800 -
ABB Symphony Plus SD Series HART I/O: HAI805 and HAO805 -
ABB Symphony Plus S+ Turbine: Auto Synchronizer Module AS800
-
ABB S900 I/O Application-Guide CI920S/CI920B replaced by CI920AS/CI920AB
-
ABB S800 I/O Communication interfaces Compact Product Suite -
ABB S800 I/O Communication interfaces Compact Product Suite -
ABB IndustrialIT System 800xA S800 I/O System
-
ABB Advant® Master S100 I/O system -
ABB Ability™ Symphony® Plus MR Series (Melody Rack) -
ABB Data Sheet ControlIT Harmony Analog I/O
-
ABB Bailey* network90 Loop Interface/Bus Interface(LIM/BIM) -
ABB Bridge Controller and Process Bus Adapter BRC-300 and PBA-200 -
ABB Kent Morrisey, Business Development Manager – Harmony Evolution NA Harmony Evolution Options For Process Industries Users -
ABB Industrial'T System 800xA Harmony/INFI90 System
-
ABB Ability™ Symphony® Plus HR Series Control and I/O -
ABB AC700F controller with direct S700 I/O
-
ABB ContransIthe family with Instruction Manual for Freelance 2000 -
ABB AC servo motors BSM Series -
ABB BSD Series
-
ABB ControlMaster CM10 Universal process controller, 1/8 DIN -
ABB PGC2000 Advance Training Course Synopsis
-
ABB PGC5000 Series gas chromatographs -
ABB EasyLine EL3000 Series Continuous gas analyzers -
ABB AO2000 Advance Optima Continuous gas analyzers -
ABB Advant® Controller 450
-
ABB Advant® Controllers -
ABB Ability™ System 800xA -
ABB Advant® Master S100 I/O system -
ABB SYNCHROTACT®5 Operating Instructions -
ABB Web Tension Systems with Tension Electronics PFEA111 -
ABB Pressductor Pillowblock Load Cells Vertical Measuring PFCL201 -
ABB Force Measurement Products Cold rolling and processing of steel -
ABB DCS800 Drives
-
ABB MNS iS motor control center -
ABB Condition MonitoringMService
