K-WANG
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
Extreme situations
Terminal blocks suitable for extreme environmental conditions without XC version markings.
Figure 3 (see part number 1SAP3... (label)) is used to identify the XC version.
ABB TB511-ARCNET Terminal base
Extreme situations
Terminal blocks suitable for extreme environmental conditions without XC version markings.
Figure 3 (see part number 1SAP3... (label)) is used to identify the XC version.
Tips!
Not using wall mounted accessories will damage the module!
During screw assembly, using wall fittings (TA526) can prevent module bending and damage.
The wall fitting TA526 must be inserted.
1. Similar to a DIN rail, fasten TA526 into the rear of the module. A TA526 rotates 180 degrees.
2. Use screws (M4, maximum torque of 1.2 Nm) to tighten the module from the front end.
1. I/O bus
2 processor module slots
3 communication module slots
4 fieldbus plug interface, not suitable for terminal block TB523-2ETH
5 Power Supply 24 VDC
6 serial interface COM1
7 Network interface: TB5xx ETH: Ethernet, TB5xx-ARCNET： ARCNET
8 TB5x1: Serial interface COM2, TB5x3-2ETH: Second Ethernet network interface
9 wall mounted holes
1.5.1 Power Supply
Pin allocation label function description
The terminal board has been removed and inserted
L++24 V DC power supply voltage positive pin
L++24 V DC power supply voltage positive pin
M 0 V power supply voltage negative pin
M 0 V power supply voltage negative pin
FE functional grounding
1.5.2 Serial Interface COM1
pin assignment
Pin Pin
signal
Interface
explain
Terminal P
RS-485
Terminal P
two
RxD/TxD-P
RS-485
Receive/send, positive pole
three
three
，WOO
WO0
four
RxD/TxD-N
RS-485
Receive/send, negative pole
five
four
Terminal N
RS-485
Terminal N
six
five
RTS
RS-232
Request to send (output)
six
TxD
RS-232
Send data (output)
nine
seven
SGND
Signal grounding
Signal grounding
The terminal board has been removed
The terminal board has been inserted
RS-232
enter
eight
RxD
Receive data (input)
nine
CTS
RS-232
Clear send (input)
Tips!
Idle connector!
Ensure that the terminal board is always connected to the terminal block, even if the interface is not in use.
1.5.3 Serial Interface COM2
pin assignment
serial interface
Pin Pin
signal
Interface
explain
one
FE
Functional grounding
two
TxD
RS-232
send data
output
three
RxD/TxD-P
RS-485
Receive/Send
positive electrode
RTS
RS-232
Request to send
output
five
SGND
Signal grounding
0V power supply output
six
+5V
5V power supply output
seven
RxD
RS-232
receive data
input
eight
RxD/TxD-N
RS-485
Receive/Send
negative pole
nine
CTS
RS-232
Clear send
input
shield
FE
Functional grounding
Tips!
There is a risk of corrosion!
If XC equipment is used in a salt spray environment, idle connectors and slots may be corroded.
For XC device TA535, idle connectors and slots should be protected with TA535 protective covers.
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
Electric tricycle truck, agricultural tricycle, elderly vehicle, warehouse truck -
GE 8042-CC-85 Carrier extension cable, 0.85m -
GE 8086-FC-20 20 + 24 pin cables for 8619 (2m) -
GE 8041-CC-35 Carrier extension cable, 0.35m -
GE 8085-FC-10 20 + 24 pin cables for 8619 (1m) -
GE 8034-CC-12 Intrinsically Safe Carrier Extension
-
GE 8082-FC-30 16-pin cable for 8618 (3m) -
GE 8030-CE-RH Intrinsically Safe Carrier extender, right hand -
GE 8080-FC-10 16-pin cable for 8618 (1m) -
GE 8021-CE-LH Carrier extender, left hand -
GE 8044-CC-20 Carrier extension cable, 2.0m -
GE 8725-CA-RB Railbus isolator carrier with PFM -
GE 8712-CA-NS Node services carrier, Profibus-DP LAN -
GE 8724-CA-PS Intrinsically Safe module power supply carrier
-
GE 8711-CA-NS Node services carrier, screw terminal LAN -
GE 8723-CA-RB Railbus isolator carrier -
GE 8606-FT-RT Field terminal, RTD -
GE 8620-FT-MT Field terminal assembly
-
GE 8604-FT-FU Field terminal, fused -
GE 8617-FT-NI Field Terminal, non-incendive, for 16 ch DI -
GE 8601-FT-NI Field terminal, non-incendive (Div 2) -
GE 8215-DO-IS 4-channel Intrinsically
-
GE 8202-HO-IS 8-channel Intrinsically Safe Analog Output, 4-20 mA with Hart -
GE 8206-TI-IS 8-channel Intrinsically Safe RTD input -
GE 8201-HI-IS 8-channel Intrinsically Safe Analog Input, 4-20mA with Hart -
GE 8117-DO-DC 8-channel DO, 2-60Vdc isolated, unpowered -
GE 8810-HI-TX 8-Channel Safety AI, 4-20mA with HART -
GE 8142-DO-DC 16-channel Digital Output
-
GE 8140-DI-AC 16-channel Digital Input, 115VAC isolated, sinking -
GE 8112-DI-AC 8-channel DI, 115Vac non-isolated, module powered -
GE 8139-SH-DC 126-channel Addressable Smoke and Heat
-
GE 8111-DI-AC 8-channel DI, 115Vac isolated, sinking -
GE 8133-HI-TX 8-Channel Supervised AI with HART -
GE 8110-DI-DC 8-channel DI, 24Vdc non-isolated, module powered
-
GE 8109-DI-DC 8-channel DI, 24Vdc isolated, sinking
-
GE 8129-IO-DC 8-channel Supervised Discrete I/O -
GE 8106-TI-RT 4-channel RTD input
-
GE 8127-DI-SE 32-channel SOE module -
GE 8105-TI-TC 4-channel THC/mV input -
GE 8125-DI-DC 32-channel DI, non-isolated, module-powered -
GE 8104-AO-IP 8-channel AO, 4-20mA -
GE 8122-DI-DC 16-channel DI, 24Vdc isolated, sinking
-
GE 8103-AI-TX 8-channel AI, 4-20mA -
GE 8121-DI-DC 16-channel DI, 24Vdc non-isolated
-
GE 8102-HO-IP 8-channel AO, with HART for 4-20mA
-
GE 8119-VI-05 8-channel Voltage Input, 1-5Vdc -
GE 8101-HI-TX 8-channel AI, 4-20mA with HART -
GE 8755-CA-NS EBIM carrier -
GE 8522-EB-MT Ethernet Bus Interface -
GE 8752-CA-NS Universal Node Services Carrier -
GE 8515-BI-PN PROFINET Scanner Module -
GE IC754VBI12CTD Touch Screen -
GE IC754VGI10MTD Touch Screen -
GE IC754VBI1OMTD Touch Screen -
GE IC754VSL12CTD QuickPanel -
GE IC754VBL12CTD QuickPanel -
GE IC754CGL12CTD QuickPanel
-
GE IC754CBL12CTD QuickPanel -
ABB TZIDC Digital Positioner -
ABB NextMove ESB-2 motion controller -
ABB Advant Controller 70 -
ABB Advant Controller 250 -
ABB ACS850-04 drive modules -
ABB IRB 4600 Industrial Robot -
ABB IRB 910SC SCARA -
ABB Product specification IRB1200 -
ABB DCV 700 thyristor panels -
ABB Advant Controller 160 -
ABB Serial Communications Module RS232 -
ABB PP886 Compact Product Suite hardware selector -
ABB Panel 800 version 6 -
ABB Uvisor™ FAU810 – Flame Analysis Unit -
ABB Switches Automatic Transfer Switches -
ABB Dynamic braking / DC drive -
ABB Automatic Transfer Switch OTM_C_21D -
ABB Switches Change-over and transfer switches -
ABB PGC2000 Series Process Gas Chromatograph -
ABB PGC5000 Series gas chromatographs -
ABB DBDID Process gas chromatographs -
ABB Vapor Pressure (RVP) analyzers -
ABB Distributed busbar protection REB500 -
ABB SYNCHROTACT® upgrade Keep your assets synchronized, safe and productive -
ABB SYNCHROTACT® Datasheet Synchronizing devices and systems
-
ABB C310 Wall- / Pipe-mount universal process controller -
ABB AP100 pH/Redox (ORP) cartridge sensors with water-wash option -
ABB Title this is title and subtitle this is subtitle Power Factor Controller RVC Accurate control and monitoring of capacitor banks -
ABB FOUNDATION Fieldbus Linking Device LD800HSE EX -
ABB Remote Terminal Unit RTU560 -
ABB MEASUREMENT & ANALYTICS TEIP11 -
ABB MEASUREMENT & ANALYTICS Navigator 540 -
ABB For electromagnetic flowmeters FXE4000-DE43F -
ABB COM610 Communication Gateway -
ABB Symphony Plus S+ Control BRC410 -
ABB Symphony Plus SD Series PROFIBUS Interface: PDP800 -
ABB Symphony Plus SD Series HART I/O: HAI805 and HAO805 -
ABB Symphony Plus S+ Turbine: Auto Synchronizer Module AS800
-
ABB S900 I/O Application-Guide CI920S/CI920B replaced by CI920AS/CI920AB
-
ABB S800 I/O Communication interfaces Compact Product Suite -
ABB S800 I/O Communication interfaces Compact Product Suite -
ABB IndustrialIT System 800xA S800 I/O System
-
ABB Advant® Master S100 I/O system -
ABB Ability™ Symphony® Plus MR Series (Melody Rack) -
ABB Data Sheet ControlIT Harmony Analog I/O
-
ABB Bailey* network90 Loop Interface/Bus Interface(LIM/BIM) -
ABB Bridge Controller and Process Bus Adapter BRC-300 and PBA-200 -
ABB Kent Morrisey, Business Development Manager – Harmony Evolution NA Harmony Evolution Options For Process Industries Users -
ABB Industrial'T System 800xA Harmony/INFI90 System
-
ABB Ability™ Symphony® Plus HR Series Control and I/O -
ABB AC700F controller with direct S700 I/O
-
ABB ContransIthe family with Instruction Manual for Freelance 2000 -
ABB AC servo motors BSM Series -
ABB BSD Series
-
ABB ControlMaster CM10 Universal process controller, 1/8 DIN -
ABB PGC2000 Advance Training Course Synopsis
-
ABB PGC5000 Series gas chromatographs -
ABB EasyLine EL3000 Series Continuous gas analyzers -
ABB AO2000 Advance Optima Continuous gas analyzers -
ABB Advant® Controller 450
-
ABB Advant® Controllers -
ABB Ability™ System 800xA -
ABB Advant® Master S100 I/O system -
ABB SYNCHROTACT®5 Operating Instructions -
ABB Web Tension Systems with Tension Electronics PFEA111 -
ABB Pressductor Pillowblock Load Cells Vertical Measuring PFCL201 -
ABB Force Measurement Products Cold rolling and processing of steel -
ABB DCS800 Drives
-
ABB MNS iS motor control center -
ABB Condition MonitoringMService
