HIMA X-DI3202 Termination Board

HIMA X-DI3202 Termination Board

< System board for HIMA, HIMax

< For 32-channel card X-DI 32 02 (DI)

< For 32 modules

< Recommended modules: HiC2831 (DI), HiC2853 (DI)

< 24 V DC supply

< Hazardous area: spring terminals, blue

< Non-hazardous area: HIMA system connector, 96-pin

Fault indication output

Connection XG2: terminals 5, 6

Output type volt-free contact

Switch behaviour no fault: relay contact closed

power supply fault: relay contact open

module fault: relay contact open

Contact loading 30 V DC, 1 A

Indicators/settings

Display elements LED PWR1 (termination board power supply), green LED

LED PWR2 (termination board power supply), green LED

LED FAULT (fault indication), red LED

- LED lits: power supply fault

- LED flashes: module fault

LED Run, green LED

- The HIMax I/O module is supplied with power and is connected to the Termination

Board (FTA) via a system cable.

LED Field, red LED

- The HIMax I/O module detects faults in the connection between HIMax I/O module

and Termination Board (FTA).

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU EN 61326-1:2013 (industrial locations)

Conformity

Electromagnetic compatibility NE 21:2017

For further information see system description

Ambient conditions

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)

Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Degree of protection IP20

Connection

Field side explosion hazardous area: spring terminals , blue

Control side non-explosion hazardous area: HIMA system connector, 96-pin

Supply pluggable spring terminals , black

Fault output pluggable spring terminals , black

Core cross section spring terminals: 0.25 ... 1.5 mm2

(24 ... 16 AWG)

Material housing: polycarbonate, 10 % glass fiber reinforced

Mass approx. 1270 g

Dimensions 432 x 200 x 163 mm (17 x 7.9 x 6.42 inch) (W x H x D) , depth including module

assembly

Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

Data for application in connection with hazardous areas

EU-type examination certificate CESI 06 ATEX 022

Marking 1 II (1)G [Ex ia Ga] IIC

1 II (1)D [Ex ia Da] IIIC

1 I (M1) [Ex ia Ma] I

Non-hazardous area

Maximum safe voltage 250 V (Attention! Um is no rated voltage.)

Galvanic isolation

Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Directive conformity

Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000

International approvals

UL approval E106378

Control drawing 116-0327

IECEx approval

IECEx certificate IECEx CES 06.0003