K-WANG
ABB Connector for ST-Bus/PZ 752 PZ 752 H&B Contronic
Functionality
Suitable for specific systems: Specially designed for ST-Bus and H&B Contronic systems, it can ensure stable and reliable signal transmission and connection between these two systems, so that different devices and modules can communicate and work together accurately.
High signal transmission quality: adopting high-quality contact materials and precise manufacturing process, characterized by low contact resistance and high insulation resistance, it can effectively reduce attenuation, distortion and interference in the process of signal transmission, ensure the integrity and accuracy of the signal, and ensure the stable operation of the system.
Stable and reliable connection: with good mechanical connection performance, the plug and socket are closely matched, which can maintain the stability of the connection under vibration, shock and other harsh environmental conditions, preventing signal interruption or equipment failure due to loose connection, and improving the reliability and durability of the system.
Technical Parameters
Rated voltage: Generally, it can be adapted to about 250V AC or other specific industrial control voltage levels, the specific value may vary according to the application scenarios, in order to meet the electrical safety requirements of different systems.
Rated current: the rated current is usually between a few amps and a dozen amps, common such as 10A, etc., according to the actual load conditions to choose the right model, to ensure that there will be no overload heating, damage and other problems during normal operation.
Contact Resistance: Usually the contact resistance is very small, generally in the milliohm level or even lower, in order to reduce the signal transmission loss and heat, improve the efficiency and quality of signal transmission.
Insulation Resistance: High insulation resistance, usually above megohm level, such as 1000MΩ or more, to ensure good electrical insulation to prevent leakage, short circuit and other faults.
Application Scenario
Industrial automation field: In the control system of automated production line, it is used to connect the ST-Bus communication line between PLC, sensors, actuators and other equipments and the H&B Contronic related line, to realize fast and accurate communication and cooperative control between equipments, to ensure the efficient and stable operation of the production line.
Power electronic equipment: In frequency converters, inverters, soft starters and other equipment, it can be used to connect the communication line between the internal circuit board and the external control system to ensure accurate signal transmission between the equipment and the system, and to realize precise control and monitoring of the equipment.
Intelligent building electrical system: In the lighting control system, security monitoring system, elevator control system, etc. of intelligent buildings, it can be used to connect the ST-Bus and H&B Contronic signal lines between each device to realize intelligent control and management of the system, and improve the safety and comfort of the building.
In the field of rail transportation: in the signaling system, power supply system and vehicle control system of subway, light rail and other rail transportation, it can be used to connect the communication lines between various electrical equipment and control modules to ensure the safe operation of trains and the accuracy of signal transmission.
Electrical interfaces
The electrical interfaces for the output of measured values and communication with external systems include
• The integrated Ethernet-10/100BASE-T interface for
– gas analyzer configuration with configuration software ECT
– QAL3 data transfer if the QAL3 monitoring option is integrated in the gas analyzer
– data transmission with Modbus TCP/IP protocol (measured values, status signals and control signals) as well as the integrated I/O modules depending on the functional range and order
· Profibus module with one RS485 and one MBP interface (also according to VDI 4201 Part 2),
· Modbus module with one RS485 and one RS232 interface (also according to VDI 4201 Part 3),
· Digital I/O module with four digital inputs and four digital outputs,
· 2-way analog output module with two analog outputs,
· 4-way analog output module with four analog outputs.
User name | Member Level | Quantity | Specification | Purchase Date |
---|