ABB 2VAA003090 S+ I/O: IOR810 S800 I/O gateway

ABB 2VAA003090 S+ I/O: IOR810 S800 I/O gateway

Introduction

The IOR810 is the gateway module that connects Symphony  Plus SD Series as well as HR Series controllers to S800 I/O.  The IOR810 provides an additional way to utilize S800 I/O as  part of a Symphony Plus or Symphony Harmony control system  with sequence of events (SOE) capability. The accuracy of SOE  time-stamping is determined by specification of each S800 SOE  digital input module type.

The IOR810 interfaces the HN800 I/O bus (electrical or fiber  optic) to the existing S800 I/O Modulebus (fiber optic only). The  core function of the IOR810 is to scan the S800 I/O modules  and provide this information to the Symphony Plus controller via  HN800. The IOR810 can connect to, and scan up to, seven S800  cluster modems via fiber optic Modulebus. Each cluster modem  can support up to twelve S800 I/O modules.

The IOR810 has the following features: 

− Can be selectively configured either redundantly or  non-redundantly 

− Supports the sequence of events (SOE)capability of the  S800 I/O subsystem 

− Capable of interfacing to the following types of I/O within the  S800 I/O subsystem: basic AI/AO, basic DI (contact inputs),  SOE DI, basic DO, pulse inputs, temperature device inputs  (RTDs and thermocouples), Intrinsic Safety and Redundant  I/O. Table 5 lists the S800 I/O modules that have been validated for use with the IOR810.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE  

NOTES: 

1. All specification values are maximums unless stated otherwise. 

2. Must use HBX01L and HBX01R Bus Extenders for power and HN800 bus connections. 

3. A Bus Segment is defined as the collection of HN800 devices physically connected between a pair of HBX01L & HBX01R Bus Extenders. The maximum 8 Bus Segments can only be   achieved when all HBX01L & HBX01R on the bus is PR: C or later, and all TER800 on the bus is PR: F or later. When any Bus Extender or Bus Terminator with earlier product revision   is used, the maximum number of Bus Segment per electrical HN800 bus is reduced to 3. 

4. Intracabinet HN800 refers to HN800 enclosed within a stand-alone (or multibay) enclosure not leaving the protection of the enclosure. This distance includes the length of all   interconnected bases and all connecting cables.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider