GE Fanuc IC200MDD845 Comprehensive I/O Module for Industrial Automation

GE Fanuc IC200MDD845 Comprehensive I/O Module for Industrial Automation

Module Type:Mixed I/O Model Number:IC200MDD845 Operating Voltage:24VDC Input Channel Count:16 Output Channel Count:16 Communication Protocol:Modbus RTU Operating Temperature:-20"C to 70"C Mounting Style:Panel Mount Dimensions:105mm x 97mm x 60mm Power Consumption:Max. 1.0W Environmental Standards:ISO 9001:2015 Certified The GE Fanuc IC200MDD845 Mixed I/O module is engineered to enhance efficiency and reduce complexity in industrial automation projects. Its compact size and robust design make it ideal for applications requiring precise control over both input and output signals. 

 Featuring a comprehensive set of 16 input channels and 16 output channels, this module supports a wide range of signal types, ensuring compatibility with various sensors and actuators. Its Modbus RTU communication protocol facilitates seamless data exchange within the industrial network. Engineered for reliability and durability, the IC200MDD845 is designed to operate within an extensive temperature range, from -20"C to 70"C, making it suitable for challenging industrial environments. 

The panel mount style ensures secure installation on control panels or cabinets. With its low power consumption and adherence to ISO 9001:2015 quality standards, the GE Fanuc IC200MDD845 is not only energy-efficient but also meets stringent quality assurance requirements, guaranteeing dependable operation and long service life. For those seeking a reliable, flexible, and high-performance I/O solution, the GE Fanuc IC200MDD845 offers unparalleled value, backed by industry-leading technical support and a commitment to innovation in automation technology. The GE Fanuc IC200MDD845 Mixed I/O module is designed for advanced control applications, offering seamless integration and enhanced efficiency in industrial automation systems. 

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition