GE VMIVME-7750 Pentium III VME CPU Module
The GE VMIVME-7750 is a Pentium III processor-based VMEbus single-board computer developed for embedded computing applications. As part of the VMIC product family, it combines processing resources, onboard memory, Ethernet connectivity, graphics functionality and expansion capabilities on a VME-compatible board. Its architecture is designed to provide computing and communication resources within systems that use the VMEbus platform.
Product Overview
The VMIVME-7750 is an embedded CPU module designed around the Intel Pentium III processor architecture. It integrates the main computing functions required by an embedded computer into a single VMEbus board. The design includes a processor socket, system memory, non-volatile storage resources, network interfaces and onboard graphics functionality.
Unlike a general-purpose desktop motherboard, a VME single-board computer is intended for installation in a modular embedded computing environment. The VMEbus provides a standardized backplane interface through which the CPU board can communicate with other compatible boards and system components.
The VMIVME-7750 supports different processor and memory configurations depending on its ordering specification. Available processor options include Pentium III versions with different operating frequencies, while SDRAM and CompactFlash configurations can also vary. Therefore, the exact configuration of an individual board should be confirmed from its product label and ordering code.
This flexibility makes the VMIVME-7750 relevant to industrial computing installations that require a VME-based processor platform with integrated communication and expansion functions.
Intel Pentium III Processor Architecture
The VMIVME-7750 uses an Intel Pentium III processor to provide its main computing capability. The product documentation describes processor options extending up to 1.26 GHz, with the corresponding high-frequency configuration incorporating 512 Kbyte of advanced transfer cache.
The Pentium III architecture uses a 32-bit address architecture and a 64-bit data bus. Its processing design includes instruction and data caches, branch prediction and MMX technology. These features support the execution of embedded applications and operating system tasks within the VME computer environment.
The processor is installed in a dedicated CPU socket. Its configuration is determined by the board's original ordering specification. Processor frequency and hardware configuration should not be assumed from the general VMIVME-7750 model designation alone.
In an embedded control or monitoring installation, the CPU executes application software, processes information from connected devices and coordinates communication with other hardware. The actual workload depends on the operating system, application program and connected VME modules.
Memory and Storage Architecture
Memory is an important part of the VMIVME-7750 computing architecture. The board uses synchronous DRAM as its main system memory and accepts a 144-pin SDRAM SODIMM. According to the product documentation, the supported memory capacity can reach 512 Mbytes, depending on the installed configuration.
The onboard DRAM is accessible to the local processor and can also be accessed through the VMEbus interface using the PCI-to-VME bridge. This dual-access arrangement supports communication between the CPU and other VMEbus master devices. When memory is shared, software must manage access carefully to prevent one bus master from overwriting data required by another process.
The board also includes non-volatile SRAM for retaining selected system information when normal power is removed. Flash memory provides storage for system and video BIOS functions. Optional CompactFlash configurations provide additional storage capability according to the selected product option.
For maintenance and replacement purposes, the installed SDRAM and storage configuration should be checked before selecting a replacement board. Different VMIVME-7750 ordering codes may represent different memory and storage combinations.
VMEbus Interface and System Integration
The VMEbus interface is a central feature of the VMIVME-7750. It allows the CPU module to communicate with other boards installed in a compatible VME chassis. The interface is based on a PCI-to-VME bridge architecture, providing access between the local processor environment and the VMEbus system.
The board supports several VMEbus transfer modes, including A32, A24, D32, D16 and D08 access, together with additional block transfer capabilities documented for the product. These functions allow the module to participate in different VME communication arrangements.
The VMEbus interface also provides system-level functions such as bus arbitration, interrupt handling and mailbox communication. These capabilities are important in modular embedded systems where several boards may need to exchange information or request access to shared resources.
The VMIVME-7750 can operate with VMEbus system controller functionality enabled or disabled, depending on the system configuration. Its role within a chassis must therefore be established according to the backplane arrangement and the requirements of the installed VME modules.
Ethernet and Communication Interfaces
The VMIVME-7750 incorporates two Ethernet controllers to support network communication. The documented network interfaces support 10BaseT and 100BaseTX connections through the board's Ethernet connectors.
Ethernet connectivity allows the embedded computer to communicate with network-based equipment and other computing resources. It can also support remote booting functions through the network, depending on the installed software and configuration.
In addition to Ethernet, the board provides front-panel interfaces for connecting peripheral devices and supporting system operation. These include serial communication, USB and other computer interfaces specified in the product documentation.
The exact connector arrangement and available functions should be checked against the hardware version and front-panel configuration. When integrating the board into an existing system, technicians should verify the connected cables, network settings and peripheral requirements before returning the equipment to operation.
Graphics and PMC Expansion
The VMIVME-7750 includes an onboard graphics controller based on the Intel 815E chipset. Its AGP graphics functionality supports display output for embedded computing applications. The documented design includes external display memory used by the graphics subsystem.
This graphics capability provides a local display interface for system configuration, monitoring and maintenance activities where a supported display is connected. The actual display resolution and available modes depend on the graphics configuration and the connected monitor.
The board also provides a PMC expansion site based on the IEEE P1386 common mezzanine card standard. This expansion interface allows supported PMC modules to add functionality to the basic CPU board. Depending on the selected module and board configuration, expansion can provide additional input, output or communication capabilities.
PMC compatibility should be confirmed using the relevant module documentation. Mechanical fit alone does not guarantee that an expansion card will operate correctly with the installed hardware and software.
Embedded Operating System Support
The VMIVME-7750 was designed for embedded computing environments and supports several operating system platforms documented for the product. These include Windows-based systems and real-time or embedded operating systems such as VxWorks, Solaris, QNX, LynxOS and Linux.
Operating system selection depends on the application requirements, software drivers and hardware configuration. In an industrial installation, the operating system and application software are normally selected as part of the complete system design.
The board's BIOS and hardware resources provide the foundation for system startup and operation. Correct BIOS settings, storage configuration and driver support are important when maintaining an existing installation or transferring a board into another compatible system.
Installation and Maintenance Considerations
Before installing or replacing a VMIVME-7750 CPU module, maintenance personnel should verify the complete product number, processor option, memory configuration and front-panel arrangement. The VME chassis and backplane must also support the board's intended installation.
The board should be handled according to appropriate electrostatic discharge precautions. Before connecting or removing the module, the system must be placed in a safe maintenance condition following the equipment manufacturer's procedures.
During troubleshooting, technicians should consider the processor, memory module, storage device, BIOS configuration, Ethernet connections and VMEbus interface as parts of the complete computer system. A startup or communication problem may originate from a connected module, backplane condition or software configuration rather than the CPU board itself.
When selecting a replacement, the exact ordering code is especially important because different configurations may have different processor speeds, memory capacities and storage options. The installed configuration should be compared with the required system specification before installation.
Product Specifications
The following information summarizes the general product characteristics documented for the VMIVME-7750 family:
Manufacturer: VMIC / GE Intelligent Platforms
Model: VMIVME-7750
Product Type: VMEbus Single Board Computer
Processor Family: Intel Pentium III
Maximum Documented Processor Option: Up to 1.26 GHz
System Memory: PC133 SDRAM
Maximum Documented SDRAM Capacity: Up to 512 Mbytes
Network Interfaces: Dual Ethernet Controllers
Network Standards: 10BaseT and 100BaseTX
Graphics: Intel 815E-Based AGP SVGA Controller
Expansion Interface: PMC Site
System Interface: VMEbus
Additional Storage: Configuration-Dependent CompactFlash
These are family-level characteristics. The actual processor, memory, storage and other configuration details depend on the individual board's ordering code and hardware revision.
Conclusion
The GE VMIVME-7750 is a Pentium III-based VMEbus single-board computer designed for embedded computing applications. Its integrated processor, memory, Ethernet, graphics and PMC expansion functions provide a flexible hardware platform for compatible VME systems.
The board's VMEbus interface supports communication with other system modules, while its network and peripheral interfaces provide additional connectivity for embedded applications. These features make the VMIVME-7750 a specialized computing component for industrial and technical installations that use VME-based architectures.
For system maintenance and spare parts selection, the complete ordering code and installed hardware configuration should always be checked. Confirming processor type, memory capacity, storage options and interface requirements helps ensure that the selected VMIVME-7750 configuration matches the intended application.


