bently 2300/20 Vibration Monitors

bently 2300/20 Vibration Monitors

Description

The 2300 Vibration Monitors provide cost-effective continuous vibration monitoring and protection capabilities for less critical and spared machinery. They are specifically designed to continuously monitor and protect essential medium to low criticality machinery in a wide range of industries including: oil & gas, power generation, water treatment, pulp and paper, manufacturing, mining, cement, and other industries.

The 2300 Vibration Monitors are designed for using on a broad range of machine trains or individual casings where the sensor point count fits the monitor’s channel count and where advanced signal processing is desired.

Monitor Key Features

·Two 4-20 mA outputs with internal current loop power supply. 

· Continuous monitoring and protection l Two acceleration/velocity/proximity inputs with synchronized sampling for advanced diagnostics. 

·One dedicated speed channel supporting Proximity probes, Magnetic pickup and Proximity switch type sensors. 

· Supports process variable on all three input channels. 

· Key measurements (Acceleration pk, Acceleration rms, Velocity pk, Velocity rms, Displacement pp, Displacement rms, Speed) real-time provided with alarm configuration. 

· Each channel has one measurement group, and can add additional two bandpass measurements and several nX measurements (depends on the device availability). 

·LCD and LED for real time value and status display. 

· Ethernet 10/100 Base-T communication for configuration using Bently Nevada Monitor Configuration software (Included) with RSA encryption. 

· Local contacts for positive engagement of monitor bypass, configuration lockout, and latched alarm/relay reset. 

· Two relay outputs with programmable setpoints. 

· Three buffered transducer outputs (including Keyphasor signal) providing short circuit and EMI protection. Buffered outputs for each signal are through BNC connectors. 

·Modbus over Ethernet. 

· Alarm Data Capture

Specifications

DC Input：18~36 Vdc, max 7.5 W

Configurable Bandpass filter：0.2 Hz to 20 kHz

Scale Factor range：5 to 1000 mV/g

Full scale range：2 to 80 g peak

Current Sink Source：3.3 mA ± 5%

Open Circuit Voltage：-21 to -24 Vdc

Configurable Bandpass filter：0.2 Hz to 20 kHz

Scale Factor range：5 to 1000 mV/in/s

Full scale range：0 to 50 in/s peak

Configurable Bandpass filter：0.2 Hz to 20 kHz

Scale Factor range：5 to 1000 mV/mil

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

- Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider