GE IS200SRTDH2ACB RTD Terminal Board Mark VI
Product Overview
The GE IS200SRTDH2ACB is an RTD terminal board associated with GE Speedtronic turbine control applications. It provides a connection point for field resistance temperature detector signals and interfaces with the corresponding temperature input hardware. Within an industrial control cabinet, the terminal board forms part of the signal connection arrangement between temperature sensors installed on equipment and the control system responsible for processing measurement data.
Resistance temperature detectors are widely used in power generation and industrial process applications because they provide temperature measurements for equipment monitoring and operational supervision. The IS200SRTDH2ACB is intended for use as part of an appropriately configured RTD input arrangement rather than as an independent temperature controller. Its function must be considered together with the associated input module, wiring configuration and control system hardware.
RTD Signal Connection and Interface Function
An RTD sensor changes its electrical resistance in response to temperature variation. The associated input electronics measure this resistance and convert the signal into temperature information that can be used by the turbine control system. The terminal board provides the field connection interface for the sensor circuits and helps organize the wiring between field devices and the input electronics.
In a turbine installation, RTD measurement points may be used to monitor bearings, lubrication systems, cooling circuits and other equipment locations. The actual measurement points depend on the plant design and the configured instrumentation. By providing an organized connection arrangement, the terminal board supports the integration of these temperature signals into the wider control architecture.
Application in GE Speedtronic Control Systems
GE Speedtronic control platforms use dedicated input and output hardware to acquire field signals and exchange information with the control system. RTD input arrangements are designed to work with the appropriate temperature input module and terminal board combination. The complete hardware configuration determines how field signals are connected, acquired and processed.
GE documentation for Mark VIe RTD applications identifies the IS220PRTDH1B RTD input pack with terminal board options including IS200SRTDH2A. This provides useful reference information when identifying the relevant RTD hardware family. However, the exact relationship between a particular IS200SRTDH2ACB assembly and a replacement module should be confirmed using the installed hardware identification, system documentation and approved configuration records.
Typical Industrial Applications
Gas turbine temperature measurement and monitoring.
Steam turbine auxiliary equipment temperature supervision.
Bearing and lubrication system temperature acquisition.
Cooling system and process equipment temperature monitoring.
Industrial power generation control cabinets.
Maintenance and replacement of GE turbine control system components.
Hardware Identification and Configuration
The complete part number is important when identifying an industrial control board. The IS200SRTDH2ACB designation should be checked against the identification label and the markings on the physical assembly. Similar-looking boards within the same product family may have different revisions, connection arrangements or application requirements.
When selecting a replacement, engineers should compare the full catalog number, board revision, connector arrangement and terminal layout. The associated RTD input pack must also be identified. A terminal board that belongs to the same general product family is not automatically interchangeable with every other RTD interface board.
For maintenance projects, the original system drawings and hardware configuration records are important references. They help establish the correct sensor wiring, channel assignment and module pairing before a replacement is installed. Any changes to the original arrangement should follow the applicable engineering and commissioning procedures.
Installation and Maintenance Considerations
Before installation, verify that the control cabinet and associated equipment are in the required safe state. Follow the plant's electrical isolation procedures and observe electrostatic discharge precautions when handling circuit boards. Inspect the board for visible damage, connector condition and any signs of contamination before connecting field wiring.
Field RTD wiring should follow the approved system drawings. Sensor type, wiring arrangement, terminal assignment and cable shielding requirements must be checked against the input module documentation. Incorrect wiring can result in inaccurate temperature readings, channel faults or unexpected diagnostic indications.
After installation, the associated input module and control system configuration should be checked. Maintenance personnel should review channel status, diagnostic messages and displayed temperature values. Where required, sensor circuits should be verified against the plant's maintenance procedures before the equipment is returned to normal operation.
Product Selection and Replacement Guidance
When sourcing the GE IS200SRTDH2ACB, provide the complete part number and, where possible, photographs of the board label and connector side. Additional information about the existing RTD input pack and control system platform can help establish whether the proposed board matches the installed arrangement.
It is also useful to compare the hardware revision and physical terminal layout with the original component. This is particularly important when working with older turbine control installations, where hardware revisions and site-specific configurations may affect replacement decisions.
GE IS200SRTDH2ACB Technical Summary
Manufacturer: General Electric (GE)
Model: IS200SRTDH2ACB
Product Type: RTD Terminal Board
Product Family: GE Speedtronic Control System
Signal Category: Resistance Temperature Detector (RTD)
Primary Function: Field RTD signal connection and interface
Application: Turbine and industrial temperature monitoring
Conclusion
The GE IS200SRTDH2ACB RTD Terminal Board is a temperature signal interface component for industrial turbine control applications. It supports the connection of field RTD sensors to the corresponding input hardware, contributing to temperature monitoring within a configured GE Speedtronic control system. Accurate part number identification, compatible input module selection and correct field wiring are essential when maintaining or replacing this component.


