GE IS420ESWBH2A Mark VIe IONet Network Switch
Product Overview
The GE IS420ESWBH2A is an industrial unmanaged Ethernet switch designed for use in GE Mark VIe and Mark VIeS control system networks. It belongs to the ESWB family of IONet switches and provides multiple copper and fiber-optic connections for industrial communication applications. The switch is designed to support the network architecture used by GE turbine control systems, where reliable data communication between controllers and I/O devices is essential for system operation.
This model features 16 copper Ethernet ports supporting 10/100BASE-TX communication and two 100BASE-FX multimode fiber-optic ports with LC-type connections. The combination of copper and fiber interfaces allows the switch to connect compatible network equipment through different cable media within an industrial control installation.
Network Communication Function
In a GE Mark VIe control system, IONet provides the communication infrastructure between controllers and distributed input/output devices. The network carries control-related data between system components, allowing the control platform to acquire field information and distribute the required control outputs.
The IS420ESWBH2A operates as an unmanaged industrial Ethernet switch. It provides Ethernet connectivity and packet switching without requiring the user to configure a conventional managed-switch interface. Its design supports full-duplex communication, data buffering and flow control for industrial network applications.
Using an appropriate IONet switch helps maintain the communication structure required by the control system. Network topology, cable selection and switch placement should follow the applicable GE system design documentation.
Ethernet and Fiber Port Configuration
The IS420ESWBH2A provides 16 copper ports using 10/100BASE-TX Ethernet interfaces. These ports use RJ45 connectors and are intended for compatible copper Ethernet connections. Auto-negotiation supports the applicable link speed and duplex operation.
The model also includes two 100BASE-FX multimode fiber-optic ports with LC-type connections. Fiber interfaces can be used where the network design requires optical connections between equipment locations. Multimode fiber provides an alternative to copper cabling and can help address electrical isolation and cable-routing requirements in industrial installations.
It is important to distinguish the IS420ESWBH2A from other ESWB models. The H1A, H2A, H3A, H4A and H5A versions have different fiber-port configurations. The exact model should therefore be checked before selecting a replacement or planning network changes.
Key Product Features
Designed for GE Mark VIe and Mark VIeS control system applications.
Industrial unmanaged Ethernet switching.
16 copper Ethernet ports with 10/100BASE-TX support.
Two 100BASE-FX multimode fiber-optic ports.
LC-type fiber connections.
Auto-negotiation for copper Ethernet link speed and duplex.
Full-duplex switching and data buffering functions.
Redundant DC power input arrangement.
DIN-rail mounting capability with the appropriate mounting clip.
Power Supply and Mounting
The GE ESWB switch family is designed with two independent DC power inputs. The power input arrangement supports redundant supply connections, with the inputs diode-ORed to support continuity when one supply source is unavailable. The documented power requirement for the ESWB family is 24/28 VDC, with a maximum current rating of 1 A.
The switch uses separate power connectors for its redundant supply inputs. When integrating the device into a control cabinet, technicians should verify the supply voltage, polarity and wiring arrangement against the applicable product documentation.
The IS420ESWBH2A can be mounted on a DIN rail using an appropriate GE-qualified mounting clip. The mounting clip is ordered separately, so the required accessory and mounting orientation should be checked during system planning. Adequate clearance should also be maintained for cable connections and normal convection cooling.
Applications in Industrial Control Systems
The IS420ESWBH2A is intended for network communication applications within GE turbine control installations. Typical application areas include:
GE Mark VIe turbine control system IONet networks.
GE Mark VIeS functional safety control system networks.
Communication between compatible controllers and I/O devices.
Industrial Ethernet connections inside turbine control cabinets.
Power generation and industrial process control facilities.
Control network installations requiring copper and multimode fiber connections.
Installation and Maintenance Considerations
Before installing the IS420ESWBH2A, verify that the complete part number matches the intended network position. Check the copper and fiber connection requirements, the existing network topology and the associated control system documentation. The H2A version has a specific combination of copper and multimode fiber ports, and it should not be treated as interchangeable with every ESWB model.
Inspect the RJ45 connectors, fiber LC interfaces and power terminals before connecting the switch. Copper Ethernet cables should meet the applicable cable category and installation requirements. Fiber cables should match the multimode interface and connector type. Keep optical connectors clean and protect unused interfaces from contamination.
During maintenance, observe the plant's electrical isolation procedures and follow the manufacturer's handling recommendations. Check the status indicators for power, link activity, duplex and speed as applicable. Abnormal link conditions should be investigated by checking the cable, connected device, power source and network configuration.
Because the switch is part of a control system communication network, replacement and network changes should be carried out in accordance with approved engineering procedures. GE system documentation should be consulted before substituting a switch or modifying the IONet topology.
Product Identification and Replacement
When sourcing a GE IS420ESWBH2A, confirm the complete model number on the product identification label. The ESWB family includes several versions with different optical port arrangements. A similar-looking model may have a different fiber interface configuration and may not meet the requirements of the existing installation.
For replacement selection, compare the original part number, port arrangement, power connection and mounting requirements. Photographs of the identification label, front panel and connector side can help with product identification. The installed system drawings and network design records should remain the primary references for confirming suitability.
Technical Specifications
Manufacturer: General Electric (GE)
Model: IS420ESWBH2A
Product Type: Industrial Ethernet / IONet Switch
Control System: GE Mark VIe / Mark VIeS
Switch Type: Unmanaged Ethernet Switch
Copper Ports: 16 x 10/100BASE-TX RJ45
Fiber Ports: 2 x 100BASE-FX multimode fiber, LC-type
Power Requirements: 24/28 VDC, 1 A maximum
Power Arrangement: Two redundant DC power inputs
Mounting: DIN-rail mounting with an appropriate mounting clip
Cooling: Convection cooled
Conclusion
The GE IS420ESWBH2A Mark VIe IONet Network Switch is an industrial communication component designed for GE turbine control system networks. With 16 copper Ethernet ports and two multimode fiber-optic ports, it provides connectivity for compatible control system devices and supports the communication architecture used in Mark VIe and Mark VIeS installations.
Correct model identification is essential when maintaining or replacing this switch. Confirm the port configuration, power requirements, mounting arrangement and system compatibility before installation to ensure that the selected component matches the requirements of the existing IONet network.


