K-WANG
This General Specifications (GS) describes the hardware specifications of Power Supply Module. This model can
be installed in Field Control Unit (FCU), FIO Node Unit or Optical ESB Bus Repeater Unit. Dual-redundant power
supply can be configured by installing 2 modules.
YOKOGAWA PW482 Input Power Supply Module
Item Specifications
Model PW481 PW482 PW484
Input power supply voltage 100~120 V AC ± 10 %
50/60 Hz ± 3 Hz
220~240 V AC ± 10 %
50/60 Hz ± 3 Hz 24 V DC ± 10 %
Maximum power consumption 200 VA 230 VA 5.5 A
Weight Approx. 1 kg Approx. 1 kg Approx. 1 kg
Input/Output interface Exclusive connector Exclusive connector Exclusive connector
Power Supply Module(PW481. PW482. PW484) can be installed in the following units.
FCU: AFV30D, AFV30S, A2FV50D, A2FV50S, A2FV70D, A2FV70S
FIO Node Unit: ANB10D, ANB10S, ANB11D, ANB11S
Optical ESB Bus Repeater Unit: ANT10U
Base Plate: A2BE1D, A2BE2D
• Power Supply Module must be installed in slots P1-P2.
• In the case of single configuration, Power Supply Module must be installed in slot P1.
• Dual-redundant configuration is enabled by installing 2 identical modules with the same model code.
n ORDERING INFORMATION
100 - 120 V AC Input Power Supply Module
Description
Model PW481 100 - 120V AC Input Power Supply Module
Suffix
Codes
-5 Standard type with no explosion protection
-E Standard type with explosion protection
0 Basic type
1 With ISA Standard G3 option with temperature (-20°C to 70°C)
220 - 240 V AC Input Power Supply Module
Description
Model PW482 220 - 240V AC Input Power Supply Module
Suffix
Codes
-5 Standard type with no explosion protection
-E Standard type with explosion protection
0 Basic type
1 With ISA Standard G3 option with temperature (-20°C to 70°C)
24 V DC Input Power Supply Module
Description
Model PW484 24V DC Input Power Supply Module
Suffix
Codes
-5 Standard type with no explosion protection
-E Standard type with explosion protection
0 Basic type
1 With ISA Standard G3 option with temperature (-20°C to 70°C)
n APPLICABLE STANDARDS
Refer to “Integrated Production Control System CENTUM VP System Overview (GS 33J01A10-01EN).”
n ORDERING INFORMATION
Specify model and suffix codes.
For selecting the right products for explosion protection, please refer to TI 33Q01J30-01E without fail.
TRADEMARK ACKNOWLEDGMENT
The names of corporations, organizations, products and logos herein are either registered trademarks or trademarks
of Yokogawa Electric Corporation and their respective holders.
User name | Member Level | Quantity | Specification | Purchase Date |
---|