K-WANG
+086-15305925923
Service expert in industrial control field！
Product
Article
NameDescriptionContent
Adequate Inventory, Timely Service
pursuit of excellence
Ship control system
Equipment control system
Power monitoring system
Brand
Product parameters
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
Description
Windows 2000 integrated, IEC 61131-3 compliant engineering tool. A special add-on includes
AC 800PEC-specific functionality.
The AC 800PEC add-on provides full integraIT tion of the AC 800PEC into the Control
ABB PPD113 AC800PEC Control System
Large-scale power converters and drives
must be reliable, fast and precise. That
calls for a control system with outstanding
performance, such as the AC 800PEC.
But why should the same controller not
cope with slow processes, too, such as
cooling circuits, monitoring and balance of plant?
The AC 800PEC does it all: when it comes
to high-speed processes in an industrial
environment with all related ancillary
tasks, it is the ideal controller
The AC 800PEC is ABBs high-end process
IT control system, and belongs to the Control
product line.
The AC 800PEC is the optimum solution forcombining
• the high-speed control requirements of
power electronics applications
• low-speed process control tasks usually
carried out by separate PLC units.
The AC 800PEC controller is configured and
programmed using Control Builder M, ABB’s
well-established programming tool, and
® ® / Simulink with Real-Time MATLAB
® Workshop .
Key benefits
The AC 800PEC is a modular high-speed
control system. The modules are arranged
according to the
required I/O config uration and the
process.
The AC 800PEC I/O
modules are
connected
via optional
high-speed
point-to-point
connections.
The AC 800PEC supports up to
36 bi-directional fiber-optic
PowerLinks.
Performance
The AC 800PEC excels with a very high
processing speed. It provides
• Very fast analog and digital process I/Os with
a typical cycle time of 25 µs
• Fast closed-loop control and regular process
logic implemented in one controller
• Low-speed I/Os with a typical cycle time of
10 ms
• Very fast analog/digital conversion and
nominal/actual value comparison, directly on
the peripheral I/O module.
Connectivity
The AC 800PEC features outstanding ability to
communicate with other control devices:
• Two Ethernet ports for connection to a plant
control network, other processor modules,
the Control Builder M programming tool and
to the PECView service tool
• RS-232 / RS-422 serial ports for a local
process panel and/or service terminal
• Up to two on-board AnyIO ports for
ABB Communications Expansion bus (CEX)
®-S modules for all common and AnyBus
fieldbus types
• Up to 36 terminals for optical PowerLinks
and ABB S800 optical ModuleBus for cost effective, noise-immune connections to
I/O systems and power converters.
Modular configuration
The modular-design AC 800PEC comes with:
• Units mounted onto a DIN rail or equipped
for direct wall mounting
The AC 800PEC hardware
The AC 800PEC system incorporates
equipment that meets the most challenging
– and also contradictory – requirements in
process control. It includes a wide range of
I/O modules to cover all power electronics
control requirements.
The different I/O modules can be connected
to the AC 800PEC controller to cover most
automation requirements in:
• Process industry
• Power generation and distribution
• Transportation and traction.
The modular, energy-efficient design of the
AC 800PEC allows operation without forcedcooling.
The modules are mounted on standard DIN
rails and can easily be installed in distributedprocesses.
The number of directly connectable I/O sys tems is limited only by the maximum available
fiber-optic links to the processor (36 bidirec tional links).
Depending on the required performance,
single, multiple or redundant bidirectional links
are used between modules.
Each module comprises a mechanical carrier,
a base module and a configurable set of sub modules which provide the required I/O
terminals or communication interfaces.
AC 800PEC Controller PP D113
The controller comprises a low power circuit
with high reliability. The hardware can be
configured freely, depending on the process
requirements and the selected communication
with the upper control.
The AC 800PEC controller module contains the
processor, the optical interfaces to the periph eral I/O, the fieldbus, and interfaces to the
upper control:
• Base unit AC 800PEC BP (backplane with
slots for mounting the processor, the power
supply, and the optical and communication
modules)
• Processor module AC 800PEC CPU
mounted on the AC 800PEC BP. The CPU is
a fully-featured 750 MHz RISC processor with
a 64-bit IEEE Floating-Point-Unit (FPU). It is
optimized for applications with very fast
control cycles
• Two AnyIO interfaces, each consisting of
®-S slot – an AnyBus
– an additional AnyIO extension slot for an
AC 800PEC CEX interface or special
applications
• Up to 6 AC 800PEC optical modules for
fiber-optic links to various I/O modules.
Purchase history
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
Total 0 Record
Related products
Customer Reviews
Satisfaction ：
5 Stars
No evaluation information
-
ABB 3BHT300009R1 DO620 Digital Output 32ch, 60VDC -
ABB 3BHT300006R1 DO610 Digital Output 32ch 24VDC -
ABB 0338434M-REF Refurbished DLM 02, Link module, as of V3 -
ABB DLM01 EXCITATION REDUNDANCY CONTROL SYSTEM -
ALSTOM V4561484-0100 PCB circuit boards -
ABB NE870 Network Router 3BSE080239R1 -
ABB DI610 – 32-Channel Digital Input Module for Industrial Automation -
ABB DDO02 Industrial Digital Output Module
-
ABB 0369627MR DDO01 - DIGITAL OUTPUT -
ABB DDI03 Module -
ABB 0369626M-EXC Exchange of DDI 01, Digital input as of V 3 -
ABB Y0338701M DCP10 - CPU MODULE 8 MB -
ABB DCP02 CPU MODULE -
ABB 0369629M-REF Refurbished DAO 01, Analog output, as of V3 -
ABB DAI03 Digital Input Module -
ABB D-20-0-1102 control module -
ABB BB510 (DC5256) Digital Control Module -
ABB BRC-300 Bridge Controller and Process Bus Adapter -
ABB CI520V1 AF100 Communication Interface -
ABB 3BHT300003R1 CI610 IOB_A Bus Extender for Basic Unit
-
ABB CI615 Controller Module -
ABB EXC3BSE012868R1 CI626V1 AF100 Communication Interface
-
ABB CI627 Advanced Industrial Control Module -
ABB 3BSE020520R1 CI810B AF 100 Fieldbus Comm. Interface
-
ABB CP450 Installation and Operation Manual -
ABB CR-M4LS Logical socket for 2c/o or 4c/o CR-M relay -
ABB 3HAC14550-2/09A Single servo drive unit -
ABB 3HAC17326-1/02 Motor M26 Type B -
ABB 3HNA001572-001 MCCB-02 -
ABB 3HNE 00313-1 TILLV.0317 Machine No. 64-25653 -
ABB 3HNE00313-1 (with 10 m cable and plug) -
ABB 61615-0-1200000 Panel Controller -
ABB AI610 – 32 Channel 12-bit Analog Input Module -
ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA -
ABB AI835A System 800xA hardware selector -
ABB 3BHT300008R1 AO610 Analog Output 16ch, 12bit -
ABB 3HAB8101-8/08Y Servo Drive Module -
ABB 3HAC025466-001 Advanced Control Module for Industrial Automation -
.jpg)
Rolls-Royce Marine AS 5880-PC1002 REV-A DEP. Steering - TENFJORD PCB Card -
Rolls-Royce 5880-pc1002 Version A Dep Steering Gear-Tenfjord PCB Card 99046 -
.jpg)
Rolls-Royce Marine Lauer LCA 325. P2 PROFIBUS-DP Network Display Panel UN924 -
Rolls-Royce Marine UN924 Digital Display Controller -
.jpg)
Rolls-Royce UN930 Digital Display Controller 24V -
.jpg)
Rolls-Royce UN31 ECR Panel 000127603 -
.jpg)
Rolls-Royce Marine AS UN991.1 Distribution Plate -
.jpg)
Rolls-Royce Propulsion Control Boards -
.jpg)
Rolls-Royce SLIO 02 Canman controller network -
.jpg)
Rolls-Royce Electronics 1071 Automatic Display Type No. 07918 B UN 921 ECR 24VDC -
Rolls-Royce PCC1030C ULSTEIN Panel Controller Card -
.jpg)
Rolls-Royce KAMEWA Propeller Control Room Panel Basic R160637A -
Rolls-Royce Ulstein-UMAS V Marine Automation UN925 Panel Controller Roller for Parts -
.jpg)
Rolls-Royce Marine AS UN921 Operator Panel -
.jpg)
Rolls-Royce Marine r10I53s / R10I53S Panel Computer 98H0101A0000I Version 1.9 -
ABB 3BHB003689 Multifunction Controller Module
-
ABB 3ASC25H204 DAPU100 high-performance processor module
-
ABB 3ASC25H203 Module -
ABB 35AE92 – High Performance Industrial Control Module
-
ABB 200900-004 I/O Adaptor PLC Board -
AB 1794-IE8 FLEX I/O Analog Modules -
AB 1794-IF8IH FLEX I/O Isolated Input HART Analog Module -
AB 1794-IE8H FLEX I/O 8 Input HART Analog Module -
AB 1794-L34 FlexLogix Controller System User Manual -
AB 1794-OB8 FLEX I/O Digital DC Output Modules -
AB Enhanced PLC-5 Programmable Controllers -
AB 1785-BCM and 1785-BEM Modules for PLC-5 Programmable Controllers -
AB Cat. No. 1785-CHBM ControlNet PLC-5 Hot Backup System -
AB 1785-ENET PLC-5 Ethernet Interface Module -
AB 1785-L20C15 ControlNet PLC-5 Programmable Controllers -
AB 1785-L40E Ethernet PLC-5 Programmable Controllers -
AB 1785-PFB PLC-5 PROFIBUS Local Station Manager -
AB 1785 PLC-5 Programmable Controller System -
AB 1785 um019 PLC-5 Ethernet Interface Module
-
AB 1786 - RPA/B ControlNet Modular Repeater Adapter -
AB PLC-5 1771 to ControlLogix 1756 I/O Wiring Conversion Systems -
AB Analog Input Module Cat. No. 1771-IFE -
AB 1771-IFE A/B/C Analog Input Module -
AB Cat. No.1771-IVN DC (10-30V) Input Module -
AB 1771-OFE Series B Analogue Output Modules
-
AB Cat. No.1771-QB Linear Positioning Module -
AB 1771-VHSC Very High-speed Counter Module
-
AB 1771 Digital I/O AC Input and Output Modules -
AB 1783 Series Ethernet Taps -
AB Stratix 8000 and 8300 Ethernet Managed Switches -
AB MicroLogix 1400 Programmable Controllers -
AB1642 Module Manual MicroLogix 1500 & CompactLogix Resolver Interface Module -
AB 1769-L24ER-QB1B CompactLogix 5370 L2 Controllers
-
AB 1769 Compact I/O Modules Specifications -
AB 1769 Controller CompactLogix System
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controller
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controllers -
AB 1762-L24AWA MicroLogix 1200 Programmable Controllers
-
AB 1762-IQ8OW6 DC-Input/Relay-Output Combination Module -
AB 1757-SRM ProcessLogix and ControlLogix System Redundancy Module -
GE ALSTOM：SPU.232.2.029.366.817 -
AB ProcessLogix R500.1 Process Control System
-
AB 1761 - NET - Ethernet Interface for ENI MicroLogix -
AB 1761-L20BWB-5A MicroLogix 1000 Series
-
AB 1761 MicroLogix 1000 Programmable Controller -
AB 1756-DHRIO, 1756-DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module -
AB 1756-D IO ControlLogix I/O Modules Specifications -
AB 1756-cpu ControlLogix Systems -
AB 1756 ControlLogix Analog I/O Modules -
AB 1756 ControlLogix System -
AB 1756 IB32 ControlLogix 32-point DC (10…31.2V) Input Module Series B -
AB 1756-IR6I ControlLogix Analog I/O Modules -
AB 1756-DNB ControlLogix DeviceNet Scanner Module -
AB 1756-CN2RXT ControlLogix-XT ControlNet Interface Module
-
AB 1756-CN2 1756-CN2R ControlLogix ControlNet Interface Module -
AB 1747 - AENTR SLC 500 EtherNet/IP Adapter -
AB 1746, 1747SLC500 Control System Selection Guide
-
AB 1746-C7, 1746-C9, 1746-C16 SLC 500™ Programmable Controller Rack Interconnect Cables -
AB 1746-BTM Drum Temperature Control Module -
AB 1746-BAS and 1746-BAS-T SLC 500 BASIC and BASIC-T Modules -
AB 1746-A4, -A7, -A10 SLC 500™ Modular Chassis -
AB SLC 500™ Modular Chassis 1746-A4, -A7, -A10 and -A13 Series B -
AB 1734-AENT POINT I/O EtherNet/IP Adapter -
AB Allen-Bradley's 1734 POINT I/O Series Products -
A-B 1715 Redundant I/O System Specifications
-
AB 56AMXN/B ControlLogix AutoMax DCSNet and AutoMax Remote I/O Communication Interface Module -
AB Bulletin 1203 Serial Communications Module -
AB 1326AB High Performance AC Servomotors -
AB 1326AB 460V, Torque Plus Series, AC Servo Motors -
AB 1336 PLUS II Engineering Drives -
AB CENTERLINE® 2100/2400 Series Motor Control Centres -
AB 1394 Digital AC Multi-Axis Motion Control System -
AB 1398 ULTRA 100 Series Drives -
AB 1402 Series Line Synchronisation Modules -
AB 1407-CGCM Combined Generator Control Module
