EMERSON-CSI-A6120 Vibration Monitor

EMERSON-CSI-A6120 Vibration Monitor

DESCRIPTION

The Case Seismic Vibration Monitor, for use with electromechanical seismic transducers, is designed for high reliability for the plant’s most critical rotating machinery. This 1-slot monitor is used together with other CSI 6500 monitors to build a complete API 670 machinery protection monitor. Applications include steam, gas, compressors and hydro turbomachinery. Case measurements are common in nuclear power applications.

The main functionality of the Case Seismic Vibration Monitor is to accurately monitor case seismic vibration and reliably protect machinery by comparing vibration parameters against alarm setpoints, driving alarms and relays.

Case seismic vibration sensors, sometimes called case absolute (not to be confused with shaft absolute), are electro-dynamic, internal spring and magnet, velocity output type sensors. The case seismic vibration monitor provides overall vibration monitoring for the bearing case in velocity, mm/sec (in/sec).

Since the sensor is mounted on the case, the resultant vibration of the case could be influenced by many different sources including rotor movement, foundation and case stiffness, blade vibration, adjacent machines, etc.

When replacing field sensors, many sensors are being updated with piezoelectrictype sensors that provide internal integration from acceleration to velocity. The piezoelectric-type sensor is a newer style electronic sensor, instead of an older electromechanical sensor. The Case Seismic Vibration Monitor is backward-compatible to the electro-mechanical sensors installed in the field.

The CSI 6500 Machinery Health Monitor is an integral part of PlantWeb® and AMS Suite. PlantWeb provides operations integrated machinery health combined with the Ovation® and DeltaV™ process control system. AMS Suite provides maintenance personnel advanced predictive and performance diagnostic tools to confidently and accurately determine machine malfunctions early.

SPECIFICATION

„ Two-channel, 3U size, 1-slot plug

in module decreases cabinet space requirements in half from traditional four-channel 6U size cards 

„ API 670 compliant, hot swappable module 

„ Remote selectable limit multiply and trip bypass 

„ Front and rear buffered and proportional outputs, 0/4-20 mA output, 0 - 10 V output 

„ Use with electro-dynamic (electro-mechanical) sensor 9266, 9267, or 9268

Transducer Inputs

Number of Inputs:Two, independent channels

Type of Inputs:Electro-dynamic (electro-mechanical), differential

Emerson Sensor Inputs:Part number: 9266, 9267, or 9268

Isolation:Galvanically separated from power supply

Input Resistance:>100 kΩ

Input Voltage Range:-5 - +15 VDC

Input Frequency Range:

„ Lower cutoff 1 or 5 Hz 

„ Upper cutoff 50 - 2000 Hz adjustable

Measuring Range

Range:

„ Continuously adjustable with the configuration software 

„ Vrms (metric) = 5 - 100mm/s (±25 to ±500 μm) 

„ Vrms (English) = 0.197 in/sec to 3.937 in/sec (±0.984 mils to ±19.685 mils)

Frequency Range:10 - 1000 Hz (VDI 2056, DIN 4566, ISO 3945)

Selectable Frequency Range:„ 5 - 50 Hz, 10 - 50 Hz, 50 - 1000 Hz, or 50 - 1600 Hz

Lifting Coil Current:0 - 8 mA configurable in steps of 40 μA

Max Permissible Load:3.4 kΩ at 2 mA

Min Dynamic Input Voltage:311 mV peak to peak

Sensor Power Supply:

„ Separate buffered sensor supply 

„ Galvanically separated from all system voltages and system supply voltage. 

„ Open and short circuit proo