K-WANG
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
ABB AC31 adapter for retrofitting
ABB AC31 adapter for retrofitting
DESCRIPTION
For the protection of your investments and for ease of migration to the new AC500 PLC generation, ABB provides AC31 adapter modules based on AC500.The modules have the same footprint, cabling and features as the previous AC31 series 90 products with up-to-date AC500 hardware.AC31 adapter modules can replace existing AC31 devices with either direct compatible e.g. I/O modules or need adjustments with a new user program for the CPU using Automation Builder software.
Brand Introduction
ABB is one of the world's top 500 companies, headquartered in Zurich, Switzerland, and traded on the Zurich, Stockholm and New York stock exchanges.ABB was formed in 1988 by the merger of two international companies with more than 100 years of history - the Swedish company ASEA and the Swiss company BBC Brown Boveri. ABB is a global leader in power and automation technology, providing solutions to customers in the industrial, energy, power, transport and building sectors that help them to improve productivity and energy efficiency while reducing their impact on the environment. In 2012, ABB generated sales of approximately US$ 39 billion.
Advantages at a glance
• Compatible with the existing AC31 series 90 remote I/O-modules, in some cases with 1-to-1 replacement in the field, no change of application configuration required.
• Footprint identical to predecessor hardware.
• Automation Builder for PLC programming.
• Standard AC500 modules for seamless migration from AC31 to the new AC500.
• Longer life cycle of AC31 through migration to new solution.
Main characteristics and architecture
The connection locations do not differ from the predecessor hardware and the number or type of I/O channels are comparable. For remote I/O products on the CS31 bus, I/Os of an existing field application.can be modified without having to change the application or configuration. New modules can be configured with DIP switches.
Replacing the AC31 PLC with the 07KT98-x-AD PLC requires to rewrite the application program using the Automation Builder engineering suite.
The modules have the same footprint, cabling position and channel assignment. The AC31 adapter module supports most of the previous functionalities of the old module. There are only a few exceptions and minor differences that are listed below:
• The AC31 adapter I/O modules can only be used, supported and tested with ABB AC31 master devices and cannot run with third party controllers.
• The AC31 adapter modules are based on standard AC500 I/O modules and on a specific electronic base, the modules cannot be purchased separately and are always delivered as complete devices. The pluggable electronic module cannot be replaced separately without the base.
The following specifications must be strictly adhered to in order to comply with the instructions and warnings related to the operation of the product system:
The technical specifications and typical applications of the product system must be strictly observed.
Personnel training: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the
These personnel must be instructed and briefed on the conditions in the hazardous area.
Unauthorised modifications: No modifications or structural changes may be made to the product system.
Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.
Working environment: The user must fulfil the specified environmental conditions:
Safety regulations
The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:
1 Disconnect completely.
2 Secure to prevent reconnection.
3 Make sure that the installation is complete.
4 Perform earthing and short-circuiting.
APPLICATIONS
• Simulation
• Instrumentation
• Industrial control
• Process control and monitoring
• Factory automation
• Intelligent networked PLC controllers
• Automated test
• Data acquisition
For more information on this
ABB Control Panels CP600 Display control instrument
ABB CM572 PROFIBUS communication module Input/output module
ABB PM582-ETH Processor module Input/output module
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
ABB 3BHT300009R1 DO620 Digital Output 32ch, 60VDC -
ABB 3BHT300006R1 DO610 Digital Output 32ch 24VDC -
ABB 0338434M-REF Refurbished DLM 02, Link module, as of V3 -
ABB DLM01 EXCITATION REDUNDANCY CONTROL SYSTEM -
ALSTOM V4561484-0100 PCB circuit boards -
ABB NE870 Network Router 3BSE080239R1 -
ABB DI610 – 32-Channel Digital Input Module for Industrial Automation -
ABB DDO02 Industrial Digital Output Module
-
ABB 0369627MR DDO01 - DIGITAL OUTPUT -
ABB DDI03 Module -
ABB 0369626M-EXC Exchange of DDI 01, Digital input as of V 3 -
ABB Y0338701M DCP10 - CPU MODULE 8 MB -
ABB DCP02 CPU MODULE -
ABB 0369629M-REF Refurbished DAO 01, Analog output, as of V3 -
ABB DAI03 Digital Input Module -
ABB D-20-0-1102 control module -
ABB BB510 (DC5256) Digital Control Module -
ABB BRC-300 Bridge Controller and Process Bus Adapter -
ABB CI520V1 AF100 Communication Interface -
ABB 3BHT300003R1 CI610 IOB_A Bus Extender for Basic Unit
-
ABB CI615 Controller Module -
ABB EXC3BSE012868R1 CI626V1 AF100 Communication Interface
-
ABB CI627 Advanced Industrial Control Module -
ABB 3BSE020520R1 CI810B AF 100 Fieldbus Comm. Interface
-
ABB CP450 Installation and Operation Manual -
ABB CR-M4LS Logical socket for 2c/o or 4c/o CR-M relay -
ABB 3HAC14550-2/09A Single servo drive unit -
ABB 3HAC17326-1/02 Motor M26 Type B -
ABB 3HNA001572-001 MCCB-02 -
ABB 3HNE 00313-1 TILLV.0317 Machine No. 64-25653 -
ABB 3HNE00313-1 (with 10 m cable and plug) -
ABB 61615-0-1200000 Panel Controller -
ABB AI610 – 32 Channel 12-bit Analog Input Module -
ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA -
ABB AI835A System 800xA hardware selector -
ABB 3BHT300008R1 AO610 Analog Output 16ch, 12bit -
ABB 3HAB8101-8/08Y Servo Drive Module -
ABB 3HAC025466-001 Advanced Control Module for Industrial Automation -
.jpg)
Rolls-Royce Marine AS 5880-PC1002 REV-A DEP. Steering - TENFJORD PCB Card -
Rolls-Royce 5880-pc1002 Version A Dep Steering Gear-Tenfjord PCB Card 99046 -
.jpg)
Rolls-Royce Marine Lauer LCA 325. P2 PROFIBUS-DP Network Display Panel UN924 -
Rolls-Royce Marine UN924 Digital Display Controller -
.jpg)
Rolls-Royce UN930 Digital Display Controller 24V -
.jpg)
Rolls-Royce UN31 ECR Panel 000127603 -
.jpg)
Rolls-Royce Marine AS UN991.1 Distribution Plate -
.jpg)
Rolls-Royce Propulsion Control Boards -
.jpg)
Rolls-Royce SLIO 02 Canman controller network -
.jpg)
Rolls-Royce Electronics 1071 Automatic Display Type No. 07918 B UN 921 ECR 24VDC -
Rolls-Royce PCC1030C ULSTEIN Panel Controller Card -
.jpg)
Rolls-Royce KAMEWA Propeller Control Room Panel Basic R160637A -
Rolls-Royce Ulstein-UMAS V Marine Automation UN925 Panel Controller Roller for Parts -
.jpg)
Rolls-Royce Marine AS UN921 Operator Panel -
.jpg)
Rolls-Royce Marine r10I53s / R10I53S Panel Computer 98H0101A0000I Version 1.9 -
ABB 3BHB003689 Multifunction Controller Module
-
ABB 3ASC25H204 DAPU100 high-performance processor module
-
ABB 3ASC25H203 Module -
ABB 35AE92 – High Performance Industrial Control Module
-
ABB 200900-004 I/O Adaptor PLC Board -
AB 1794-IE8 FLEX I/O Analog Modules -
AB 1794-IF8IH FLEX I/O Isolated Input HART Analog Module -
AB 1794-IE8H FLEX I/O 8 Input HART Analog Module -
AB 1794-L34 FlexLogix Controller System User Manual -
AB 1794-OB8 FLEX I/O Digital DC Output Modules -
AB Enhanced PLC-5 Programmable Controllers -
AB 1785-BCM and 1785-BEM Modules for PLC-5 Programmable Controllers -
AB Cat. No. 1785-CHBM ControlNet PLC-5 Hot Backup System -
AB 1785-ENET PLC-5 Ethernet Interface Module -
AB 1785-L20C15 ControlNet PLC-5 Programmable Controllers -
AB 1785-L40E Ethernet PLC-5 Programmable Controllers -
AB 1785-PFB PLC-5 PROFIBUS Local Station Manager -
AB 1785 PLC-5 Programmable Controller System -
AB 1785 um019 PLC-5 Ethernet Interface Module
-
AB 1786 - RPA/B ControlNet Modular Repeater Adapter -
AB PLC-5 1771 to ControlLogix 1756 I/O Wiring Conversion Systems -
AB Analog Input Module Cat. No. 1771-IFE -
AB 1771-IFE A/B/C Analog Input Module -
AB Cat. No.1771-IVN DC (10-30V) Input Module -
AB 1771-OFE Series B Analogue Output Modules
-
AB Cat. No.1771-QB Linear Positioning Module -
AB 1771-VHSC Very High-speed Counter Module
-
AB 1771 Digital I/O AC Input and Output Modules -
AB 1783 Series Ethernet Taps -
AB Stratix 8000 and 8300 Ethernet Managed Switches -
AB MicroLogix 1400 Programmable Controllers -
AB1642 Module Manual MicroLogix 1500 & CompactLogix Resolver Interface Module -
AB 1769-L24ER-QB1B CompactLogix 5370 L2 Controllers
-
AB 1769 Compact I/O Modules Specifications -
AB 1769 Controller CompactLogix System
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controller
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controllers -
AB 1762-L24AWA MicroLogix 1200 Programmable Controllers
-
AB 1762-IQ8OW6 DC-Input/Relay-Output Combination Module -
AB 1757-SRM ProcessLogix and ControlLogix System Redundancy Module -
GE ALSTOM：SPU.232.2.029.366.817 -
AB ProcessLogix R500.1 Process Control System
-
AB 1761 - NET - Ethernet Interface for ENI MicroLogix -
AB 1761-L20BWB-5A MicroLogix 1000 Series
-
AB 1761 MicroLogix 1000 Programmable Controller -
AB 1756-DHRIO, 1756-DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module -
AB 1756-D IO ControlLogix I/O Modules Specifications -
AB 1756-cpu ControlLogix Systems -
AB 1756 ControlLogix Analog I/O Modules -
AB 1756 ControlLogix System -
AB 1756 IB32 ControlLogix 32-point DC (10…31.2V) Input Module Series B -
AB 1756-IR6I ControlLogix Analog I/O Modules -
AB 1756-DNB ControlLogix DeviceNet Scanner Module -
AB 1756-CN2RXT ControlLogix-XT ControlNet Interface Module
-
AB 1756-CN2 1756-CN2R ControlLogix ControlNet Interface Module -
AB 1747 - AENTR SLC 500 EtherNet/IP Adapter -
AB 1746, 1747SLC500 Control System Selection Guide
-
AB 1746-C7, 1746-C9, 1746-C16 SLC 500™ Programmable Controller Rack Interconnect Cables -
AB 1746-BTM Drum Temperature Control Module -
AB 1746-BAS and 1746-BAS-T SLC 500 BASIC and BASIC-T Modules -
AB 1746-A4, -A7, -A10 SLC 500™ Modular Chassis -
AB SLC 500™ Modular Chassis 1746-A4, -A7, -A10 and -A13 Series B -
AB 1734-AENT POINT I/O EtherNet/IP Adapter -
AB Allen-Bradley's 1734 POINT I/O Series Products -
A-B 1715 Redundant I/O System Specifications
-
AB 56AMXN/B ControlLogix AutoMax DCSNet and AutoMax Remote I/O Communication Interface Module -
AB Bulletin 1203 Serial Communications Module -
AB 1326AB High Performance AC Servomotors -
AB 1326AB 460V, Torque Plus Series, AC Servo Motors -
AB 1336 PLUS II Engineering Drives -
AB CENTERLINE® 2100/2400 Series Motor Control Centres -
AB 1394 Digital AC Multi-Axis Motion Control System -
AB 1398 ULTRA 100 Series Drives -
AB 1402 Series Line Synchronisation Modules -
AB 1407-CGCM Combined Generator Control Module
