K-WANG
- Telephone:+86-15305925923
- contacts:Mr.Wang
- Email:wang@kongjiangauto.com
GE VMIVME-7750 Single Board Computer
GE VMIVME-7750 Single Board Computer
DRAM Memory
The VMIVME-7750 accepts one 144-pin SDRAM SODIMM for a maximum memory capacity of 512 Mbyte. The DRAM is dual ported to the VME.
Super VGA Controller
High resolution graphics and multimedia-quality video are supported on the VMIVME-7750 by a built-in 815E chipset AGP graphics adapter. The adapter is complemented by 4 Mbyte external synchronous DRAM cache with a high-bandwidth 64-bit data interface. Screen resolutions up to 1,600 x 1,200 x 256 colors (single view mode) are supported by the graphics adapter.
Features:
• Up to 1.26 GHz Pentium® III processor with 512 Kbyte advanced transfer cache
• Up to 512 Mbyte PC133 SDRAM using a single SODIMM
• Internal AGP SVGA controller with 4 Mbyte display cache
• 133 MHz system bus via Intel® 815E chipset
• Dual Ethernet controllers supporting 10BaseT and 100BaseTX
• interfaces• PMC expansion site
• ows 2000, VxWorks®, Solaris™, QNX®, LynxOS®, and Linux®
Microprocessor
The VMIVME-7750 brings the Intel Pentium III processor to VME, offering processor speeds up to 1.26 GHz. The Pentium III processor has 32-bit addressing and a 64-bit data bus. Its superscalar architecture allows three instructions to be executed per clock cycle. A dynamic branch prediction unit, separate instruction and data caches, and MMX™ technology also increase the processor’s performance. The Pentium III processor also provides 256 Kbyte (1.26 GHz has 512 Kbyte) of advanced transfer cache (on-die, full speed level 2 cache) using dual independent bus architecture for high bandwidth and performance. This L2 cache operates at the same clock frequency as the processor, thus improving performance.
Ethernet Controller
The VMIVME-7750 supports Ethernet LANs with two Intel Ethernet controllers (one 82559 and the other internal to Intel’s chipset ICH2). 10BaseT and 100BaseTX options are supported via two RJ45 connectors. Remote LAN booting is supported.
Remote Ethernet Booting:
The VMIVME-7750 utilizes Lanworks Technologies, Inc.’s BootWare®. BootWare provides the ability to remotely boot the VMIVME-7750 using NetWare, TCP/IP, or RPL network protocols.
BootWare Features:
• NetWare, TCP/IP, RPL network protocol support
• Unparalleled boot sector virus protection
• Detailed boot configuration screens
• Comprehensive diagnostics
• Optional disabling of local boots
• Dual-boot option lets users select network or local booting
Operating System and Software Support
The VMIVME-7750 provides embedded features beyond PC/AT functionality. These features are supported by GE Fanuc Embedded Systems software products aimed at developers who are incorporating GE Fanuc Embedded Systems SBCs, I/O boards, and workstations into systems. Windows XP/Windows 2000 and VxWorks are the most common operating systems supported by GE Fanuc Embedded Systems software products.
Windows XP/Windows 2000
The IOWorks® software family is a set of software components that can work together or separately to provide a total development environment for any application in a Windows XP/ Windows 2000 OS.
The I/O Solution for Your I/O Problem
GE Fanuc Embedded Systems’ experience in supplying high performance deterministic controllers for multiple markets has led to the development of IOWorks software with features, benefits and capabilities to solve nearly any I/O problem. From PLC alternatives to data servers that support the seamless interconnection of dissimilar systems, GE Fanuc Embedded Systems has the solution for simple to complex, high speed, deterministic requirements.
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
ABB 3BHT300009R1 DO620 Digital Output 32ch, 60VDC -
ABB 3BHT300006R1 DO610 Digital Output 32ch 24VDC -
ABB 0338434M-REF Refurbished DLM 02, Link module, as of V3 -
ABB DLM01 EXCITATION REDUNDANCY CONTROL SYSTEM -
ALSTOM V4561484-0100 PCB circuit boards -
ABB NE870 Network Router 3BSE080239R1 -
ABB DI610 – 32-Channel Digital Input Module for Industrial Automation -
ABB DDO02 Industrial Digital Output Module
-
ABB 0369627MR DDO01 - DIGITAL OUTPUT -
ABB DDI03 Module -
ABB 0369626M-EXC Exchange of DDI 01, Digital input as of V 3 -
ABB Y0338701M DCP10 - CPU MODULE 8 MB -
ABB DCP02 CPU MODULE -
ABB 0369629M-REF Refurbished DAO 01, Analog output, as of V3 -
ABB DAI03 Digital Input Module -
ABB D-20-0-1102 control module -
ABB BB510 (DC5256) Digital Control Module -
ABB BRC-300 Bridge Controller and Process Bus Adapter -
ABB CI520V1 AF100 Communication Interface -
ABB 3BHT300003R1 CI610 IOB_A Bus Extender for Basic Unit
-
ABB CI615 Controller Module -
ABB EXC3BSE012868R1 CI626V1 AF100 Communication Interface
-
ABB CI627 Advanced Industrial Control Module -
ABB 3BSE020520R1 CI810B AF 100 Fieldbus Comm. Interface
-
ABB CP450 Installation and Operation Manual -
ABB CR-M4LS Logical socket for 2c/o or 4c/o CR-M relay -
ABB 3HAC14550-2/09A Single servo drive unit -
ABB 3HAC17326-1/02 Motor M26 Type B -
ABB 3HNA001572-001 MCCB-02 -
ABB 3HNE 00313-1 TILLV.0317 Machine No. 64-25653 -
ABB 3HNE00313-1 (with 10 m cable and plug) -
ABB 61615-0-1200000 Panel Controller -
ABB AI610 – 32 Channel 12-bit Analog Input Module -
ABB AI625 Analog Input 16ch, 12 Bit, 4-20 mA -
ABB AI835A System 800xA hardware selector -
ABB 3BHT300008R1 AO610 Analog Output 16ch, 12bit -
ABB 3HAB8101-8/08Y Servo Drive Module -
ABB 3HAC025466-001 Advanced Control Module for Industrial Automation -
.jpg)
Rolls-Royce Marine AS 5880-PC1002 REV-A DEP. Steering - TENFJORD PCB Card -
Rolls-Royce 5880-pc1002 Version A Dep Steering Gear-Tenfjord PCB Card 99046 -
.jpg)
Rolls-Royce Marine Lauer LCA 325. P2 PROFIBUS-DP Network Display Panel UN924 -
Rolls-Royce Marine UN924 Digital Display Controller -
.jpg)
Rolls-Royce UN930 Digital Display Controller 24V -
.jpg)
Rolls-Royce UN31 ECR Panel 000127603 -
.jpg)
Rolls-Royce Marine AS UN991.1 Distribution Plate -
.jpg)
Rolls-Royce Propulsion Control Boards -
.jpg)
Rolls-Royce SLIO 02 Canman controller network -
.jpg)
Rolls-Royce Electronics 1071 Automatic Display Type No. 07918 B UN 921 ECR 24VDC -
Rolls-Royce PCC1030C ULSTEIN Panel Controller Card -
.jpg)
Rolls-Royce KAMEWA Propeller Control Room Panel Basic R160637A -
Rolls-Royce Ulstein-UMAS V Marine Automation UN925 Panel Controller Roller for Parts -
.jpg)
Rolls-Royce Marine AS UN921 Operator Panel -
.jpg)
Rolls-Royce Marine r10I53s / R10I53S Panel Computer 98H0101A0000I Version 1.9 -
ABB 3BHB003689 Multifunction Controller Module
-
ABB 3ASC25H204 DAPU100 high-performance processor module
-
ABB 3ASC25H203 Module -
ABB 35AE92 – High Performance Industrial Control Module
-
ABB 200900-004 I/O Adaptor PLC Board -
AB 1794-IE8 FLEX I/O Analog Modules -
AB 1794-IF8IH FLEX I/O Isolated Input HART Analog Module -
AB 1794-IE8H FLEX I/O 8 Input HART Analog Module -
AB 1794-L34 FlexLogix Controller System User Manual -
AB 1794-OB8 FLEX I/O Digital DC Output Modules -
AB Enhanced PLC-5 Programmable Controllers -
AB 1785-BCM and 1785-BEM Modules for PLC-5 Programmable Controllers -
AB Cat. No. 1785-CHBM ControlNet PLC-5 Hot Backup System -
AB 1785-ENET PLC-5 Ethernet Interface Module -
AB 1785-L20C15 ControlNet PLC-5 Programmable Controllers -
AB 1785-L40E Ethernet PLC-5 Programmable Controllers -
AB 1785-PFB PLC-5 PROFIBUS Local Station Manager -
AB 1785 PLC-5 Programmable Controller System -
AB 1785 um019 PLC-5 Ethernet Interface Module
-
AB 1786 - RPA/B ControlNet Modular Repeater Adapter -
AB PLC-5 1771 to ControlLogix 1756 I/O Wiring Conversion Systems -
AB Analog Input Module Cat. No. 1771-IFE -
AB 1771-IFE A/B/C Analog Input Module -
AB Cat. No.1771-IVN DC (10-30V) Input Module -
AB 1771-OFE Series B Analogue Output Modules
-
AB Cat. No.1771-QB Linear Positioning Module -
AB 1771-VHSC Very High-speed Counter Module
-
AB 1771 Digital I/O AC Input and Output Modules -
AB 1783 Series Ethernet Taps -
AB Stratix 8000 and 8300 Ethernet Managed Switches -
AB MicroLogix 1400 Programmable Controllers -
AB1642 Module Manual MicroLogix 1500 & CompactLogix Resolver Interface Module -
AB 1769-L24ER-QB1B CompactLogix 5370 L2 Controllers
-
AB 1769 Compact I/O Modules Specifications -
AB 1769 Controller CompactLogix System
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controller
-
AB 1763-L16AWA MicroLogix 1100 Programmable Controllers -
AB 1762-L24AWA MicroLogix 1200 Programmable Controllers
-
AB 1762-IQ8OW6 DC-Input/Relay-Output Combination Module -
AB 1757-SRM ProcessLogix and ControlLogix System Redundancy Module -
GE ALSTOM：SPU.232.2.029.366.817 -
AB ProcessLogix R500.1 Process Control System
-
AB 1761 - NET - Ethernet Interface for ENI MicroLogix -
AB 1761-L20BWB-5A MicroLogix 1000 Series
-
AB 1761 MicroLogix 1000 Programmable Controller -
AB 1756-DHRIO, 1756-DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module -
AB 1756-D IO ControlLogix I/O Modules Specifications -
AB 1756-cpu ControlLogix Systems -
AB 1756 ControlLogix Analog I/O Modules -
AB 1756 ControlLogix System -
AB 1756 IB32 ControlLogix 32-point DC (10…31.2V) Input Module Series B -
AB 1756-IR6I ControlLogix Analog I/O Modules -
AB 1756-DNB ControlLogix DeviceNet Scanner Module -
AB 1756-CN2RXT ControlLogix-XT ControlNet Interface Module
-
AB 1756-CN2 1756-CN2R ControlLogix ControlNet Interface Module -
AB 1747 - AENTR SLC 500 EtherNet/IP Adapter -
AB 1746, 1747SLC500 Control System Selection Guide
-
AB 1746-C7, 1746-C9, 1746-C16 SLC 500™ Programmable Controller Rack Interconnect Cables -
AB 1746-BTM Drum Temperature Control Module -
AB 1746-BAS and 1746-BAS-T SLC 500 BASIC and BASIC-T Modules -
AB 1746-A4, -A7, -A10 SLC 500™ Modular Chassis -
AB SLC 500™ Modular Chassis 1746-A4, -A7, -A10 and -A13 Series B -
AB 1734-AENT POINT I/O EtherNet/IP Adapter -
AB Allen-Bradley's 1734 POINT I/O Series Products -
A-B 1715 Redundant I/O System Specifications
-
AB 56AMXN/B ControlLogix AutoMax DCSNet and AutoMax Remote I/O Communication Interface Module -
AB Bulletin 1203 Serial Communications Module -
AB 1326AB High Performance AC Servomotors -
AB 1326AB 460V, Torque Plus Series, AC Servo Motors -
AB 1336 PLUS II Engineering Drives -
AB CENTERLINE® 2100/2400 Series Motor Control Centres -
AB 1394 Digital AC Multi-Axis Motion Control System -
AB 1398 ULTRA 100 Series Drives -
AB 1402 Series Line Synchronisation Modules -
AB 1407-CGCM Combined Generator Control Module
